Emdoor Information EM-I16H Rugged Tablet User Manual
- June 5, 2024
- Emdoor Information
Table of Contents
Rugged Tablet EM-I16H
User’s Manual
Thank you for your choosing the new Tablet PC.
This guide serves to enable users to get to know and familiar with our product
as soon as possible. Here we have made a brief introduction to the key layout
and definitions in figures and words.
Attention：
➢ This user guide is based on Windows 10 home edition
➢ This user guide is an introduction to full-function tablets. Your device may
not have all functions.
➢ This user guide applies to the following models: EM-I16H/EM-I16HH
➢ The illustrations in this manual may differ from the actual product.
Use of the previous note
- With the wrong type of battery replacement will be an explosive danger, be sure to use the original battery.
- The company shall not take any responsibility for the loss or removal of the information in the tablet, which is caused by the operation, maintenance or other accidents of the non-normal operation of the software and hardware.
- Please backup your important information at any time.
- Please do not disassemble the tablet; otherwise, it will lose the right to guarantee.
- Adapter description:INPUT: 100-240V~50/50Hz 0.5A OUTPUT:5V DC 3A
Key Layout and Definitions
1. Front camera: camera, video
3 Light sensor： Perception of external pipeline strength, electrical
signal to CPU
5. 4. voice sound +/ voice sound-: increase/reduce the volume
6. Custom buttons: for customer-defined function keys
7. Power button: to start or close the touch screen panel. You can also
let the computer
8. Scan code key: the device equipped with a scan code module can be
controlled by this button scans code
9. Lock hole: used to lock the limited use of equipment
10. Earphone Jack: the jack support outputs the audio signal to a
loudspeaker or Headset
11. HDMI interface: High-Definition Multimedia, Interface, high
definition multimedia interface
12. Micro USB 2.0: data transmission by inserting the micro USB 2.0
interface device
13. U handicap: data transmission by inserting the micro USB 2.0
interface device
14. Charging interface: charging the tablet via DC adapter
15. POGO PIN: Device for connecting base
16. Aircraft plug connection: a device for connecting an air connector
17. RS232 serial interface : used to connect the device with the RS232
serial interface
18. Ethernet interface : used to connect Ethernet connections
19. Rear camera: camera, video
21. One-dimensional/two-dimensional code scanning head: the same press
the scan button, activate the scanning head to get the barcode image
information
22. Fingerprint input sensor: used in the past fingerprint information
23. SIM Card and TF Card： SIM card and TF card are hidden in the battery
compartment. Before use, the battery compartment needs to be opened to insert
sim card and TF ard. The maximum supporting capacity of a TF card is 128G
Introduction to Desktop
1. Windows 10 starts image
Windows 10 start image: On the start screen, you can see many programs fixed
in the image. These application programs are displayed in the form of a
“magnet”. As long as you lick them, you can easily visit them.
You need to log on to your Microsoft account before the application program
completely runs.
2. Image slide applications
| Slide to right | Slide to left |
|---|
Slide to the right from the left side of the screen to scan the application
program is running.| Slide to the left from the right side of the screen to
the setting Charm menu column.
---|---
Slide downward
On the start screen, slide from the top of the screen to view application
programs
Slide with finger
On the start screen, slide your finger up and down to move the image.
3． Introduction to app Interface
Besides the application programs already fixed on the start screen, you can
also start other application programs in all application programs, such as
other software application programs attached to the Tablet PC.
If you want to fix more application programs on the start interface, see the
operation in the figure below, (1) Click the properties icon and (2) press and
hold the application program agent for about one second and then let go (3)
Click the Pin to start
Conversely, if you want to cancel or delete a certain application
on the start screen, (1) lightly touch, press, and hold the application
program magnet for about one second and then let it go and
run, and select
4. Charm menu column
Slide it to the left from the right side of the screen to start the Charm menu
column, including Start, Device, Setup, Share and Search Program.
Slide it to the left from the right side of the screen to start
the Charm menu column, Usually: File
Explorer, Settings, Power, and All apps **
**Can Sleep/Shut down/Restart the Tablet PC
Can let you search the files and application programs on the Tablet PC.
Can let you set up the Table PC.
Can scan more apps
Search Menu
| Device Menu | Set up Menu |
|---|
5． Multitasking operating interface
slide it right from the left side of the screen, Let go when Can see the
running applications. We can enter the application, which also can be deleted.
Basic Operations
1. Sleep, restart and power off
V. Windows operating instructions of the special function
module
1、U-blox GPS： (1). Copy the u-Blox test tool to the desktop.
(2). Open the software, chose receiver, and chose port again, click COM1.
(3). In the same way for the receiver, chose Baudrate, and click 9600.
(4). As below picture, double click the satellite’s model picture to enlarge.
(5).
The blue colors are the satellites that were searched, and the green colors
are
effective satellites. The numbers on the right are signal values.
Standard: Environment: in an open field, no metal around, no obstacles.
Sunny weather, no clouds covering. Condition: can see satellites above 12
pieces, effective satellites above 10 pieces. Have2-3pieces satellites value
reach above 40 dB.| 
---|---
**Android operating instructions of the special function module
**
note: please allow installation of the unknown source before software
installation
check： setting—security- unknown source
1. GPS Module operation
-
Copy GPS testing software on the local
-
Click install, and open
-
See the GPS status shown off in the top left corner. Click off and enter into the set interface
-
open the switch on the top right corner, and chose to agree again
-
Chose mode, click device only
-
Finally, return GPS main interface. Can see GPS Status shows on
-
In the open field and waiting for 1min and check if there is a satellite
-
OK！ wait for 3 mins and check if the satellites value quantity meets the standard
Standard:
Environment: in an open field, no metal around, no obstacles. Sunny weather,
no clouds covering Condition: can see satellites above 12 pieces, effective
satellites above 10 pieces. Have2-3pieces satellites value reach above 40 dB|
---|---
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help This
device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions (1)this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. This equipment complies with
FCC radiation exposure limits set forth for an uncontrolled environment.
The SAR limit of the USA (FCC) is 1.6 W/kg averaged over one gram of tissue.
Device types Rugged Tablet (EM-I16H) (FCC ID: 2A37Q-EM-I16H) has also been
tested against this SAR limit. The highest SAR value reported under this
standard during product certification for use in the body is 0.663W/kg and
Simultaneous Transmission is 0.883W/kg. This device was tested for typical
body-worn operations with the back of the handset kept 0mm from the body. To
maintain compliance with FCC RF exposure requirements, use accessories that
maintain a 0mm separation distance between the user’s body and the back of the
handset. The use of belt clips, holsters, and similar accessories should not
contain metallic components in their assembly. The use of accessories that do
not satisfy these requirements may not comply with FCC RF exposure
requirements and should be avoided.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>