Wuuk Labs Y0210 Smart Doorbell Pro Kit User Guide
- June 5, 2024
- Wuuk Labs
Table of Contents
S
mart Doorbell Pro Kit
(Battery-powered)
User Guide
WHAT’S INCLUDED
For WUUP Base Station
For WUUP Smat Doorbell Pro
Boss
station’s power adapter varies by region
PRODUCT OVERVIEW
WUUK Base Station
| Front | Back |
|---|
1. Indicator light
2. Speaker| 1. USB port
2. Ethernet port
3. Power port
4. SYNC button
WUUK Smart Doorbell Pro
Battery-powered
| Front | Back |
|---|
1. Indicator light
2. Camera lens
3. Microphone
4. Motion sensor
5. Doorbell press button
6. Speaker| 1. Power button
2. Charging port
3. AC wire ports
4. Wall mount hooks
How the System Works
The
smart doorbell system includes 2 parts: one is the video doorbell camera at
your door; the other is the WUUK Base Station in your house.
The video doorbell detects motion at your doorstep and allows you to answer
the door anytime and anywhere. You can also access the camera by checking Live
View from your phone.
The Base Station stores video clips on its built-in storage and provides
network connection and internet access for the smart doorbell.
When someone rings the doorbell, people in the house will be notified on both
the Base Station and the phone with the WUUK app installed.
CONNECTING WUUK BASE STATION TO THE INTERNET
Connect the WUUK Base Station with your WiFi router using the ethernet cable.
Plug in the power cable to the WUUK Base Station and connect the Base Station
to power outlets (Input 100-240V). At this point, the indicator light on the
WUUK Base Station turns blue which indicates the system is initializing (this
may take up to 1 minute).
Once the initialization is completed, the indicator light on the WUUK Base
Station turns green and gets ready for setup.
If the indicator light on the WUUK Base Station is red it means no Internet
access for the Base Station. Kindly check If the ethernet cable is correctly
plugged in and if your WiFi router has Internet access.
SETTING UP THE SYSTEM
Get the WUUK App and Add Device(s)
Download the WUUK app from the AppStore (i0S devices) or GooglePlay (Android
devices).
Register an account if there is no existing account.
Go to the app homepage. Tap Add Device > add the WUUK Smart Doorbell Pro to
your WUUK app.
Follow the on-screen instructions to complete the setup.
Please ensure that during the pairing process, your phone is joining the WiFi network you intend to pair with your WUUK Smart Doorbell system.
WUUK Smart Doorbell Pro
WUUK Smart Doorbell Pro is partially charged when out of the factory.
If you cannot turn on the doorbell right out of the box, you may consider
first charging the doorbell before setting the system up. Please refer to
“CHARGING THE WUUK SMART DOORBELL PRO.”
Power on: Long press the power button for 3 seconds, until you hear the
device announces “Hello, WUUK”.
Power off: Short press the power button 5 times, until the devices make 3
short beeping sounds.
Entering pairing mode: When the device is on, long-press the power button
for 3 seconds until the device makes a short beeping sound and the indicator
light is flashing red
After the doorbell(s) are added to the WUUK Base Station, you can move to the
next step *FIND A GOOD MOUNTING SPOT”.
FIND A GOOD MOUNTING SPOT
To ensure a good user experience, we recommend checking 2 things before you
start mounting the doorbell: 1. WUUK Smart Doorbell and the Base Station have
good signal reception; 2. Smart Doorbell captures images at your desired angle
and shows a desired field of view. Use the ‘Network Diagnosis” feature in the
WUUK app to test the WiFi signal strength of the WUUK Smart Doorbell Pro at
the location you plan to place or mount the camera.
Understand the Network Diagnosis Result
If the signal between the devices is not strong enough, please try to
change the location of the doorbell camera until you find a spot that has a
good signal testing result in the app.
Height and Location
The WUUK Smart Doorbell series of products is designed and built for outdoor
use, and mostly for monitoring your home entrance(s). We recommend hanging the
WUUK Smart Doorbell Pro 3.9h-4.6h (120MM-140MM) above the ground. This height
maximizes the detection range of the motion sensors on the doorbell.
Avoid placing the doorbell under direct sunlight. The original package of the
WUUK Smart Doorbell Pro (Battery-powered) contains a 15° Angle Mount. Apply
the angle mount if needed. Check in the WUUK app using the Live View feature
to confirm if the view is desired.
MOUNT THE WUUK SMART DOORBELL PRO
Choose The Way You Want to Install The Doorbell
| 3M VHB| Screws| Both
---|---|---|---
Metals, glass, ceramics, plastics, PVC| | |
Particleboard, wood, paints (fibered surfaces)| | |
Concrete, stone, limestone, brick (porous & uneven surfaces)| | |
Gabion, rubber, leather, peel metope| | |
1 Minute Installation: Apply 3M VHB Tape Better Prepare The Surface for
Strong Bond
Initial tape application to surfaces at temperatures below 50°F (10°C) is not
recommended. If you are in a cold area, warm up the tape by using a hairdryer
or other tools.
- Peel off the red foil that has the 3M VHB texts on it, and attach the backplate to where you want to sit your doorbell.
- Press hard on the backplate for 5 seconds.
- Let it be there and dwell for at least 24 hours so the 3M VHB tape can sink into the surface and build the strongest bond.
*If you choose to use the built-in battery for power or do not have AC wires in place, please skip this page.
Note: Make sure the wires go through the bookplate.
Attach The Wire Extensions (Optional)
wire nuts
Connect The Wires
Connect the wires coming out of your wall to the screws on the back of your
WUUK Doorbell. Either wire can connect to either screw. The order doesn’t
matter.
Hardwire to 8-24VAC Doorbell Transformer
If you have trouble connecting the wires coming out of your wall to the back
of your WUUK Doorbell, use the provided wire extensions and wire nuts.
Feed all the wires, and the wire nuts, if you used them, into your wall.
Screw-On (Optional.)
*For installing on porous & uneven surfaces such as concrete, stone, limestone, or brick; Or you choose to install this way.
Install anchors – on stucco, brick, or concrete (Optional)
Mark 4 drill hole positions using the doorbell locating pad provided. Use a
bit to drill holes in your wall and Install the anchors.
Screw it in – on particleboard, wood, and paints
Secure your WUUK Doorbell. the backplate on the wall using the four screws
provided.
FINAL STEP: HOOK WUUK SMART DOORBELL PRO
Make sure the WUUK Doorbell is powered on – you can press the call button a
few times and check if the Base Station is ringing. If not, please power it on
until you hear “Hello, WUUK’. Then hang the WUUK Doorbell PRO onto the wall
mount. Match the top hook on the backplate first, then snap the bottom. Press
the lower part of the doorbell until you hear a slight clicking sound.
All done! You are now set to use your WUUK Smart Doorbell Pro. and enjoy the
2K crystal video quality.
UNDERSTAND THE INDICATOR LIGHT
WUUK Base Station
Blue: The system is initializing
Green: Base Station is connected to the Internet
Red: Base Station is disconnected from the Internet
Flashing Red: Base Station is in pairing mode
WUUK Smart Doorbell Pro
Red: Smart Doorbell Pro disconnects from the Base Station, or hasn’t been
paired yet
Blue: Smart Doorbell Pro is being charged
Green: Smart Doorbell Pro’s battery is fully charged
Flashing Red: Smart Doorbell Pro is in pairing mode
CHARGING THE WUUK SMART DOORBELL PRO
| Indicator Light | Charging: Blue |
|---|
Fully charged: Greene
Charging Time| 5 hours
SAFETY STATEMENT
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. Operation is subject to the following two conditions:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Declaration of Conformity
- When charging, please place the device in an environment that has a normal room temperature and good ventilation.
- It is recommended to charge the device in an environment with a temperature that ranges from 5°C-25°C.
- Please ensure to use only the charger offered by the manufacturer. Using an unauthorized charger may cause danger and violate the authorization of the device and the guaranteed article.
- This charger is for indoor use only.
IC RF Statement
When using the product, maintain a distance of 20cm from the body to ensure
compliance with RF exposure requirements.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, This equipment
should be installed and operated with a minimum 20cm distance between the
radiator and your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>