niko 353-601021 Presence Detector User Manual
- June 5, 2024
- niko
Table of Contents
niko 353-601021 Presence Detector
Presence detector P41MR, 230 V, secondary, 12-13 m, 360°, SnapFit, for flush mounting
Wiring ⚠ 230 V – OFF
- remove if you want to use the contact as a dry contact (potential-free)
Dimensions
Installation ⚠ 230 V – OFF
App settings ⚠ 230 V – ON
LED behaviour ⚠ 230 V – ON
Green LED continuous on| |
Connection OK
|
---|---|---|---
Green LED flashing| |
Warming up
|
Wait
Red LED continuous on| |
Error
|
More info – >
detector tool
Red LED flashing| |
The detector has detected an error, please check the app notifications for more information
Blue LED flashing| |
Walk test active
Specifications
| Article number | 353-601021 |
|---|---|
| Configuration | 230 V Secondary detector |
| Input voltage | 230 Vac ± 10 %, 50 Hz |
| Maximum power consumption | 0.2 W |
| Detection angle | 360° |
| Detection range (PIR) | Ø 12 m from a height of 3 m |
| Ambient temperature | -25 – +40 °C |
| Mounting method | flush mounting with SnapFit mounting bracket |
| Mounting height | 2 – 3.5 m |
| Drill diameter | 76 mm |
| Minimum flush mounting depth | 56.9 mm |
| Colour | white (RAL 9010) |
| Dimensions visible (HxWxD) | 100 x 100 x 9.5 mm |
| Dimensions (HxWxD) | 120 x 120 x 66.4 mm |
| Wire capacity | 1.5/2.5 mm² |
| Maximum range Bluetooth® (free field, depending on the device | 25 m |
| Operating frequency | 2.4 GHz |
| Maximum radio frequency power | -2 dBm |
| Protection degree | IP20 |
| Impact resistance | IK02 |
| Modification of settings | app (iOS/Android) and 2-way Bluetooth® |
communication
Halogen-free| yes
Marking| CE
Detection area
Troubleshooting
| Problem | Possible cause | Proposed solution |
|---|---|---|
| Load does not turn on | The wiring is not correct | Check the wiring |
scheme
Load does not turn off| The detector receives false triggers| Check for
any objects that may cause false triggering and remove them from the detection
range or lower the sensitivity
App cannot connect to the detector| Bluetooth® has been disabled on your
mobile device| Enable Bluetooth® on your mobile device
Support & contact
nv Niko sa
Industriepark West 40
9100 Sint-Niklaas, Belgium
www.niko.eu
+32 3 778 90 80 support@niko.eu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>