Shenzhen Suncent Auto Parts Technology SL9CIL19100 Interior Ambient LED Strips User Manual

Shenzhen Suncent Auto Parts Technology SL9CIL19100 Interior Ambient LED

Strips

Product Specifications

Before installation

1. Open the box and check the contents.
2. Plug the car charger into the cigarette lighter and check whether the LED strip is turned on.

Steps

1. Wipe the surface of the mounting position and make sure it is clean, dry and smooth.
2. Place the control box in the armrest box and fix wires of the LED strips with a clip as shown below.
3. Remove the red protection film of the LED strips and paste the strip as shown in the figure below.
4. Firmly press the whole LED strip. Fix the strip with a cable tie.
5. Plug the car charger into the cigarette lighter and the LED strip will light up. It indicates the LED strip is powered on.

Control via control box

modes.

Color/brightness| Press the button to switch among eight

colors and press and hold the button to switch among six levels of brightness

Control via App

Download the App.
Download and install the App from App store (for iOS) or Google Play (for Android). Tip: The App is compatible with the following phone systems: iOS 9.0 and above, Android 5.0 and above.

Connect with the App

1. Turn on the Bluetooth on your phone and make sure the LED strip is powered on.
2. Turn on the App and tap the “+” icon.
3. Select the CIL0130 from the device list.

FAQs

1. No light: Check whether the light is properly wired and the interface is tightly inserted.
2. Bluetooth connection fails: Make sure that the Bluetooth on your phone is on.
3. Compatibility fails: Please replace a new phone or upgrade your phone system.
4. Search fails: Keep the product within 2m to your phone.
5. For any questions, please contact our after-sale services.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Customer service
Warranty: 12 months
Email: support@sealight-led.com
Website:https://sealight-led.com/

Notice:

The Adhesion Promoters are inedible, please keep away from children in case they are eaten by mistake.
Sealight logo
For more information and FAQs, please refer to the FAQ of the App.

References

• LED Commercial Lighting and Lighting Controls | Current - GLI Brands
• SEALIGHT Auto Parts & Equipments

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>