GOGUM D30S Smart Mini Label Maker User Manual
- June 5, 2024
- GOGUM
Table of Contents
GOGUM D30S Smart Mini Label Maker
Packaging List
*
1 Printer!**
*2 Productlnstructionl**|
*3 Charging line!**
Device Parameter
| Product name | Smart Mini Label Maker |
|---|---|
| Prod uct model | D30S |
| Printing technology | Thermal pr i nting |
| Effec tive printing width | 0.47 inch (12mm) |
| Supported consumabl es | Pre-cut/ Black mark thermal- continuous paper |
| Printing density | LighL standard, dark |
| Prin ti ng resolution | 203d pi |
| Print head service li fe | S0KM |
| Com m u nicat ion inter face | Bluetoot h |
| Prod uc t size | 5.23.2l. 3inch( l 33.580.533.5mm) |
| Power input | 5V=2A |
| **** Power supply method | Mic ro USB |
Lithium batter y
Supported operatingsystem| Android
**** iOS
Component Instruction
Appearance Introduction
Functions of the power button
| Operation method | Functions |
|---|---|
| Press and hold 2S | Turn on/off |
| Click | Print out the paper |
| Double click | Print the content of the self-t est paper |
Power indicator status
| Indicatorlight | status | Description |
|---|---|---|
| Green | Keep on | normal status (printing) |
| Flash slowly | charging with power on | |
| Flash quickly | charging with power off | |
| Red | Keep on | error (lack of paper, cover opened, high temperature) |
| Flash slowly | 10% of battery remaining | |
| Flash quickly | 5% of battery remaining |
lntroduction of Paper Roll Installation
① Slide the release latch following the arrow in the direction, and open
the paper bin cover to 90 degrees.
② Unpackthelabelpaperand put it into the paper bin, then pull the paper
5mm out of the paper outlet.
③ Close the paper bin cover and make sure the release latch is slid to the rightmost.
④ Long press the ON/OFF button to connect with an APP.
Guidelines for label paper positioning:
When installing or changing the label paper specifications for the first time,
please click the power button to feed the paper. After the printer recognizes
the label paper positioning, it starts printing
App Download Guide
- Search “Print Master”on APP Store or Google Play to get the app
- Or please scan the QR Code to download the App.
Printer connection guide:
(Please make sure that your phone’s Bluetooth is turned on)
Product Warranty
Thank you for choosing the smart mini labe_l maker.
① We will provide customers with reliable “replacement/return” support
during the one-year warranty period from the date of purchase.
② Please keep the warranty card in a safe place so that you can read it
when needed.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
① This device may not cause harmful interference
② This device must accept any interference received,including
interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the ,equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Portable device:The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>