WEEPLUG GPS Explorer 4 User Guide

WEEPLUG GPS Explorer 4

WEEPLUG is a brand imported by the company PACT GROUP, located at 33 rue du Ballon – 93160 Noisy Le Grand – France

Loading

If you use a charging socket (not included), the optimal power is: 5V 500mA The watch takes about 2 hours to fully charge.

Make sure that the charger’s connectors are correctly placed in the connectors on the back of the watch. Then plug the USB end into a USB port or charging jack.

Application

Please download the “Orunning” application to your smartphone or tablet via Google Play or App Store. You can also scan the following two QR codes to find the application.

How to connect your watch to your smartphone?

• Activate Bluetooth on your smartphone
• Open the “Orunning” application and fill in your personal data.
• Click on the “GPS Watch” category
• Then click on the following model: How to connect your watch to your smartphone?
• Activate Bluetooth on your smartphone
• Open the “Orunning” application and fill in your personal data.
• Click on the “GPS Watch” category
• Then click on the following model:
  • Follow the steps and look for the name of your device “GPSEXP4” on the application.
  • Once the device is selected, the time, date and language of your smartphone will be automatically synchronised to your watch.

How to disconnect your watch from your phone?

• Open the “Orunning” application on your smartphone.
• Press “disconnect device” in the settings.
  In the settings of your smartphone, in the Bluetooth section, press “Forget this device”.

Using

• Switching on your device: Press the switch-on button at the top right of your watch for 3 seconds.
• Switching off your device: Press the same button for 3 seconds.
• Bluetooth shortcut: Slide down to reach the setting centre of your watch.
• Return to the main menu : From each interface, slide to the right to return to the main menu, or press the power button once.
• Enter the setting center: On the main interface, slide down to the main menu.
• Confirm: Press the icon of your choice
• Back: Slide to the right
• Sport mode shortcut: Press the button on the lower right side of the watch once.
• Accessing notifications: On the main interface, slide to the right.
• Change the wallpaper: On the main interface, press and hold the screen, and then slide left to change the wallpaper. To confirm, press the touch screen once.

Different uses :

Main menu

• When you switch on your watch you access the middle interface.
• If you slide down, you access the top interface. This interface gathers all the shortcuts to set up your watch.
• If you slide up, you will access the sport interface. This interface allows you to know the number of steps taken, the number of calories burned and the distance travelled.
• If you slide to the right, you access the left interface. This interface gives you access to all the notifications you receive on your smartphone.
• Finally, if you slide to the left, you access the main menu, which brings together all the functions of your watch.

Fonctions

GPS
The GPS activates when you start any sporting activity except indoor running. Before you start your sporting activity, the following logo will be displayed on your watch:

When the logo flashes green, the device is searching for a GPS connection. Your sports activity will start automatically when a GPS network has been found. If the operation takes too long and your watch cannot find a GPS network, go out into an open area and try again.

During your activity, if the “GPS” logo flashes at the top of your screen, your watch has not found a GPS network. If it is fixed, it means that you are currently connected to a GPS network, and all your data will be transmitted to your application if your watch and your phone are properly connected during your exercise.

Adjustment center

On the main menu, slide down to access some quick actions. You can put your watch in “Do not disturb” mode, activate or deactivate Bluetooth, manage the brightness of your screen. You can also access other tesl settings other than “backlight time” or product information.

Podometer
Your watch will calculate your number of steps daily. You can retrieve this data by dragging up on the main menu. You will then be able to see the number of kilometres travelled during the day or the number of calories burned. You will also find a graph showing the number of steps taken each week. Once your watch and smartphone are synchronised, you’ll find all this information on your application as well.

Heart rate

Click on the following icon to access the heart rate sensor interface. Once on this page, the sensor will automatically launch and calculate your heart rate. Wait a few seconds before obtaining a result. Check that the watch is tight on your wrist and that the sensor is in contact with the skin. When your watch is connected to the “Orunning” application, you can retrieve all the data from the application.

Sport
To access the “SPORT” interface, press the bottom button, or slide to the left and press the following icon. There are 5 sport modes built into your watch :

• On
• Course
• Indoor race
• Bicycle

Hiking
Once you have selected a sport, you can start your training immediately, or choose a training mode by clicking on the setting icon at the bottom of your screen.
In the “Walking” and “Hiking” sport modes, the watch will calculate the number of steps, calories, distance and heart rate. In other sports
modes, the watch will also
calculate your speed. Sleeping control
The watch will automatically monitor and analyse your sleep, provided you keep the watch on your wrist during your night’s sleep. Once awake, the watch will send you your sleep data, such as the length of your deep sleep and light sleep. Once synchronised with the application, you will have more details about the application. Alarm
You can set an alarm clock via your application. On your watch, when you click on the “Alarm Clock” icon, you will see the alarm that you have previously set. When the alarm sounds, your watch will vibrate and the icon will flash.
Notifications
In the main menu, drag to the right to access your notifications. The watch notifies you of incoming calls, SMS, WhatsApp, Facebook, Twitter and Mails. Once on your notifications, slide to the left to delete your notifications.

Weather

Once your application is synchronised with your watch, your watch will tell you the weather in your geographical area. To choose a city manually, go to the application.

Music
When your phone and watch are connected, you can manage the music directly via your watch.

Stopwatch

You can start a stopwatch directly on your watch by clicking on this icon.

Find phone
Click on this icon if you have lost your smartphone, the watch will send a signal to your phone which will vibrate to help you find it.

Settings

By pressing this icon, you can access different settings.

The blue icon allows you to access different information about your watch, model name, version or processor.
Click this button to reset your watch and erase all pre-recorded data.
Click on this icon to activate or deactivate the “Sedentary” world. This mode warns you if you You can set the sedentary mode on the application.
Click on this icon to manage the brightness of your watch.
Click on this icon to manage the sleep time of your watch.
When your watch is connected to your smartphone, press this icon to launch your phone’s camera and take pictures directly from your watch.

DECLARATION OF CONFORMITY

We undersigned PACT GROUP hereby declare that the product.
Model : GPS EXPLORER 4
Type : Smart Watch
Function: Smart watch GPS
Product description: GPS-connected watch, multi-sport mode, heart rate calculation and notifications.

Meets all standards and technical directives below:

DIRECTIVES

TESTS STANDARD

IEC 60950- 1:2005+A1:2009+A2:2013| Draft ETSI EN 301 489-17 V3.2.0| IEC 62321-3-1:2013
---|---|---
EN 62479:2010| EN 60950-1:2006+A2:2013| IEC 62321-4:2013
Draft ETSI EN 301 489-1 V2.2.1| ETSI EN 300 328 V2.1.1| IEC 62321-5:2013
IEC 62321-7-2:2017| IEC 62321-8:2017| IEC 62321-6:2015
 |  | IEC 62321-7-1:2015

All tests were carried out by the laboratories mentioned below:

Shenzhen BCTC Testing Co., LTD
Nanshan District, Shenzhen City Xili Town Pond Lang with Rich Industrial Town in 44 Building 3 Floor, Shenzhen, Guangdong, China Mob/Wechat:15818554403 E-mail:manager@bctc-lab.org

Contact details of the manufacturer or agent:
PACT Group
33 rue du ballon
93160 Noisy le Grand – France

Contact details of the person authorized to edit the technical document:
Michael Barreira
33 rue du Ballon
93160 Noisy le Grand – France

This declaration shall be issued under the responsibility of the manufacturer and, where appropriate, of his representative 9/15/2020

Representative of the company: PACT GROUP
33 rue du Ballon –
Noisy le Grand – France
Maurice Bodokh

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>