dyson N248F V11 Cordless Vacuum Cleaner User Manual

dyson N248F V11 Cordless Vacuum Cleaner

IN THE BOX

Getting started

Power modes
Your machine has three power modes for different tasks. Change power modes quickly using a single button.

ECO MODE
Maximum run time for longer cleans all around your home.

MED MODE
The optimum balance of power and run time

BOOST MODE
Designed for intensive spot cleaning of ground–in dirt.

The LCD screen

The LCD screen shows performance, including the cleaning mode selected, remaining run time, ier maintenance and blocKage intormation.

SETTINGS MENU
Settings things on your machine using the Selection button. To enter the settings menu, press and hold the button until the menu screen appears. Tap to scroll through the options available.

Change language
To change the language on your screen, press the button and hold until the language list appears. Release the button. Tap the button to scroll through the language list to your preterred language. Fress and hold the button until the countdown ends. Agreen fick will appear on the screen to show your language selection is To cancel your selection, release the buton during the countdown.

Change alert settings
You can turn the alert motor pulse off. Your motor will no longer pulse but run time alert information will continue to be displayed on the LCD screen when your machine needs your attention. Turning off alerts will not turn off the blockage alert pulsing. This is to ensure you clear any blockages, preventing damage to your machine. Tap to scroll through the settings menu. Select the ‘Alerts’ option.Scroll to select on or off. Hold the button until the countdown ends and a tick appears on the screen. To cancel your selection, release the button during the count down.

Run time countdown
When the battery needs charging, your machine will pulse three times and a low run fime icon will appear on the screen. When your battery is empty, a red warning icon will appear on the screen.

Battery health
To get the best performance and life from your battery, use Eco or Med mode.

Exit settings menu

Caring for your floors

Check that the underside of the cleaner head or tool is clean and free from any objects that may cause damage. Before vacuuming your flooring, rugs, and carpets, check the manufacturer’s recommended cleaning instructions. The brush bar on your machine can damage certain carpet types and floors.Some carpets will fuzz ifa rotating brush bar is used when vacuuming. If this happens, we recommend vacuuming without the motorised floor tool and consulting with your flooring manufacturer.

Charging your machine

Ir’s important to fully charge your new machine before using it for the first time, and after every clean. This is because the battery and monitoring system’s algorithm learns’ over time, and fully charging your machine helps it to more accurately calculate and display remaining run time. Connect to the charger either directly or in the dock.The blue LEDs on either side of the battery will fash during charging. When the battery is fully charged, both LEDs will light for 5 seconds. Your battery is fully charged when the display shows 1o0%. Your machine won’t operate or charge if the ambient temperature is below 5°C (41°F). This is designed to protect both the motor and battery.

Changing your click-in battery

If you have additional click- in batteries, we recommend that you alternate the batteries to maintain even performance. Additional click-in batteries available to purchase separately

Removing your battery
Push the Battery release button on the handle and slide the battery off your machine. Charge the battery.

Refitting your battery
Align your battery with the handle and slide it in. Push firmly until it clicks into place.

Emptying your bin

Empty as soon as the dirt reaches the MAX level – don’t overfill. Using your chine, when the dirt is above the MAX line, may affect the performance and require more frequent tilter washing. Remove your wand
Press the red wand release button, on the top ot the wand, and pull the wand away from the bin.

Release the dirt
Hold the machine over the bin, pointing downwards. Firmly push the red bin release button. The bin will slide down, cleaning the shroud as it goes, and the bin base will open. The bin base won’t open if the red bin release buton isn’t pushed down all.

Minimize dust contact
Cover your bin tightly ina dust proof bag while you empty. Remove your Din carefully, seal the bag tightly and dispose.

close the bin
Push the bin base upwards until your bin and bin base click into place.

Cleaning your bin

Remove your bin
If it is necessary to clean your bin, empty it as shown in the ‘Emptying your bin’ section. Press the red button located on the bin runner to release the bin and slide your bin off the runner. Only use a damp, lint-free cloth to clean your bin. Make sure that your bin and seals are completely dry before replacing.

Refit your bin
Insert the spine on to the bin runner. Close your bin by pushing the bin base upwards until the bin and bin base click into place. Your bin isn’t dishwasher safe and the use of detergents, polishes or air fresheners to clean your bin isn’t recommended, as it may damage your machine.

Clearing blockages

Disconnect your machine from the charger before looking for blockages. Be careful not to touch the trigger and be aware of sharp objects. Leave your machine to cool down betore looking tor blockages. Don’t use your machine when looking tor blockages as fhis could cause injury. If your machine detects a blockage, the motor will pulse and you won’t be able fo use your machine until the blockage has been cleared. If you try to use your machine when the motor is pulsing, it will automatically cut out.

Check the main body
Remove the bin and check for blockages in the main body of your machine. Make sure any blockages are completely cleared and all parts are fitted betore using your machine.

Check the wond and cleaner head
Check ihe wand Tor Check your cleaner head tor blockages, following the instructions to remove the brush bar, where necessary.

Re-assemble your machine
Refit all parts securely before using your machine. Clearing blockages isn’t covered by your guarantee.

Clearing obstructions from your Motorbar cleaner head

Your Motorbar cleaner head doesn’t have a washable brush bar nom performance, check your brUsh bar regularly and clear any obstructions. Make sure your machine is disconnected from the charger and make sure your machine power is turned off.

Remove your brush Bar
Don’t put any part ot your machine in a dishwasher or use detergents, polishes or air fresheners. Press the cleaner head release button on the end of the wand. Place the cleaner needed upside down. Use a coin to unlock the end cap. Twist the end cap and remove it from your brush bar. Don’t wash the end cap. Slide your brush bar out of the cleaner head.

Look for obstructions
edr any debris from your brush bar. Check inside the cleaner head and remove any debris or blockages.Your Motorbar” cleaner head and brush bar aren’t washable. Wipe over with a damp lint-free cloth. Don’t put any part of your machine in a dishwasher or use detergents, polishes or air fresheners.

Replace your brush bar
Push the end cap back on to your brush bar and slide it back into the cleaner head. Turn the end cap into the locked position.

Clearing blockages from your Hair screw tool

Your Hair screw tool doesn’t have a washable brush bar. To maintain optimum pertormance, check your brush bar regularly and clear any obstructions. Make sure your machine is disconnected from the charger and take care not to touch the frigger.

Remove the cover and brush bar
emove the Hair screw tool from the wand or machine. Push the base plate open. Press the red lever down to release the cleaner and cover. Pull the cleaner head cover oft the main body of the tool.

Look for obstructions
Pull your brush bar tirmly to remove it trom the main body.Check and remove any obstructions from all three parts of your Srw IOO.Your Hair screw tool isn’t washable. Wipe over with a damp lint-free cloth. Don’t put any part ot your machine in a dishwasher or use detergents, polishes or air fresheners.

Re-assemble Hair screw tool
Put your brush bar back into position and press firmly until it clicks back into position. Check the red locking lever is in the unlocked position. Align the cleanerhead cover with the guide on the main body. Push it down until it clicks into position. Push the red locking lever up until it clicks into position and push the base plate back into place.

Washing your filter

Wash your tilfer at least once a month to maintain optimum suction power. For more information and support videos for your machine go online: www.dyson.com/support

Twist oft your filter
Twist your tifer anfi-clockwise and pull it away from your machine.

Tap your tilter
Betore washing your tilfer, fap it gently over a bin to remove any loose dust and debris.

Wash your tilter
finnre p waer – gently rubbing your filfer with your gers

Fill and shake
Place your hand over one end ot your filter. Fill the fiter with warm tap water. Ploce your hand over the open end of the filter and shake it firmly to remove frapped dirt and debris.
Repeat these steps until the water runs clear. 

Cleaning your tools

Don’t put any part of your machine in a dishwasher or use detergents, polishes or air fresheners. Wipe with a damp, lint-free cloth, without touching the connector end. Make sure your tools are completely dry before using. Some tools may not be included in the box.

Looking after your machine

To always get the best performance trom your machine, ifs important to clean it regularly and check tor blockages.

Look atter your machine
your machine is dusty, wipe with a damp lint-free cloth.Check for blockages in the cleaner head, tools and main body of your machine. Wash your filfer regularly and leave to dry completely. Don’t use detergents or polishes to clean your machine.

Look after your battery
To get the best performance and lite from your battery, use Eco or Auto/Med mode. Your machine won’t operate or charge it the ambient temperature is below 5C (41F) This is designed to protect both the motor and battery.

Your serial numbers
fou can tind your serial numbers on your machine, battery and charger. Use your serial number to register. For more information and support videos for your machine go online:
www.dyson.com.au/support or www.dyson.co.nz/support 

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>