Goldair GPPH610 Electronic Inverter Panel Heater with WiFi Instructions

**Electronic Inverter Panel Heater with WiFi

**

Model: GPPH610, GPPH620, GPPH630

Operating Instructions

Outdoor Radiant Heater with WiFi
Wifi – Downloading and Setting up APP
This APP is supported only on 2.4GHz Wifi channels.
The Goldair app and device pairing process require your 2.4ghz connection to be separated from your 5ghz connection. For instructions on how to do this please contact your internet provider.
Please note , that we endeavor to keep our app up to date as devices and software continue to adapt and evolve. However, with ever-changing technology and software, we cannot guarantee as models age that their Wifi operation will continue to be supported. If you feel like the day-to-day functionality of your app is impacted, please contact our customer services team.

Download the Goldair mobile APP

• Open the APP Store or Google Play on your mobile phone.
• Open ‘Search’ and enter ‘Goldair’
• Click ‘GET’ and begin to download and install.

Once downloaded to your phone open the APP

• Tap REGISTER near the bottom of the screen.
• Read and agree to the Privacy Policy.
• Add your email address.
• Tap ‘Obtain verification code’

You will then receive an email with a verification code.

• Enter the verification code from your email.
• Create a password.
• Then tap confirm.

If you haven’t received a verification code via email, tap the resend button, and when the verification code is received follow the above steps.
Your APP is now registered and ready for pairing to your device.

Pairing APP to Device

Connect with 2.4ghz Wifi Network

Confirm you are connected to a 2.4ghz network. If your 2.4ghz and 5ghz networks are dual banded, click ‘Common router setting method’ on how to split, or contact your internet provider.
Connect with 2.4ghz Wifi Network: EZ Mode
See the instructions below to finalize your device pairing via EZ mode.
The app will default to EZ Mode in the right-hand corner.
Ensure your device’s Wifi LED is flashing rapidly.
If it is not, hold down the function button for 5 seconds or until the Wifi icon begins to flash.
Click ‘Confirm indicator rapidly blink’ and ‘Next’
Your device will now pair with the app.
Please ensure your device, modem, and phone are as close together as possible and that your 2.4ghz Wifi signal is strong. Once the device has paired, choose to rename it by tapping the Pen icon Choose the most suitable room type and click ‘Done’ in the top right-hand corner.

Connect with 2.4ghz Wifi Network: AP Mode
See the instructions below to finalize your device pairing via AP Mode.

Change ‘EZ Mode’ to ‘AP  ode’  by clicking in the top right-hand corner Ensure your device’s Wifi LED is flashing slowly. If it is not, hold own the function button for 5 seconds or until the Wifi icon begins to flash.
Click ‘Confirm indicator slowly blink’ and ‘Next’| Click ‘Go Connect’ to connect to the device’s Hotspot by selecting the network highlighted  on the screen in  your app, e.g. ‘SmartLife- XXXX’| Select the device’s Hotspot network and you will be returned to the app. If not, navigate back to the oldair app. Note- if you get a notification saying ‘Internet may not be available’ press Dismiss.
|
---|---
Your device will now pairwith the app. Please ensure your device, modem and
phone are as close together as possible.| Once the device has paired, choose to rename it by tapping the Pen icon
Choose the most suitable room type and click ‘Done’ in the top right-hand corner.

Operating your Device from the APP

If the phone interface color is dark, this indicates that the heater is in the OFF standby setting.

• Tap the OFF icon and the heater will turn on.

The display will change to bright Red

• You can now control the heater.
• To turn the heater off again tap the power icon and the heater will revert to the dark screen.

TEMPERATURE SETTING:

• Tap the “+” or “-” button to set the temperature.
• When the set temperature is higher than the ambient temperature, the heater begins to heat.
• If the heater temperature setting is below ambient temperature the heater will be in standby mode and will not operate until the ambient temperature drops below the set
  temperature.

Depending on which mode you are in you can set the temperature as below.
Comfort mode can be set from 5 – 35o C
An economy mode can be set from 5 – 31oC (this is pre-set so there is always a 4o C difference between Comfort and Economy settings)
MODE
The mode can be set to Comfort, Eco or Anti-frost.
Set your desired temperature in Comfort or Eco modes by pressing the “+” or “-” buttons.
The screen will display which mode has been selected and the current set temperature and ambient temperature.
Comfort mode can be set from 5 – 35ºC
Economy mode can be set from 5 – 31ºC (this is pre-set so there is always a 4ºC difference between Comfort and Economy settings)
Anti-frost mode is pre-set at 5ºC and cannot be adjusted.
HEAT SETTINGS
In USER, you can set the heat settings from ONE (lowest) to FIVE (highest) and the set level will be shown on the bottom of the APP.
It will also show on the heater display.
In AUTO, the heater will adjust the heat settings automatically to suit the amount of power required to reach and then maintain the set temperature.
CHILD LOCK
Tap the padlock icon to display the closed padlock and “ON”, indicating that the child lock is active. Tap the padlock icon again to unlock the child lock. You can adjust the heater settings with your mobile phone without having to unlock the child lock.
If you want to adjust the heater using the heater controls then you must first press the heaters press both the UP and DOWN buttons together for 3 seconds or tap the padlock button on the APP to unlock it.
LED Display Icon
Tap this icon to turn off the LED display on the heater. This does not affect the operation of the heater.
To turn the heater display back on, tap the icon again

AUTO-OFF TIMER
When the heater is ON you can set it to turn OFF after a number of hours (1-7 hours) has elapsed.

• In the APP, tap the heater to be operated and enter the operation interface.

• With the power icon on the bottom of the mobile phone, the interface is displaying ON and the heater is turned ON.

• Tap the timer button to select the number of hours before the heater will turn OFF and tap
  OK to return to the heater operation interface.

• The timer icon on the will display how long before the timer will turn the heater OFF.

To cancel the timer, simply press cancel within the countdown interface.

Set up Tap-To-Run & Create Smart Scenes

Store your favorite settings or set up automated functions based on conditions in the ‘Smart’ part of your Goldair app.
Warning- you must remember to turn off any Smart functions prior to leaving the house or going away. We recommend you only operate your Goldair devices when someone is on the premises.

• Tap ‘Smart’ on the bottom of your mobile phone.
• Tap ‘Create Scene’ or the ‘+’ icon on the top right.

Click ‘Launch Tap-to-Run’ to save your preferred settings on your devices to launch at the click of a button. Click ‘Run the device’ and choose a device. Preset your desired
functions such as Power ON/OFF, temperature, mode, and timer as per on the device’s functions. Click ‘Next’
Review your conditions and tasks on this screen, or choose to add another device or task by clicking the ‘+’  icon.
Click Save to store your settings and your new task will appear on the Smart homepage. Click it to operate your desired task.

As well as setting up automated Tap-to-Run tasks, you can set conditions to operate your devices.
Weather:
Click ‘When weather changes’ to create a task based on your local outside weather. Choose between temperature, humidity, weather type, sunset/sunrise or wind speed. Select your desired condition and click ‘Next’. Click ‘Run the device’ and choose a device. Preset your desired functions such as Power ON/OFF, temperature, mode and timer as per the device’s functions. Click ‘Next’. Review your conditions and click save. Your automation will appear on the main Smart homepage.
Schedule:
Click ‘Schedule’ to create a task for your device at selected times of the day. Click ‘Repeat’ to choose days of the week or leave as ‘Once’ to operate as a one-off. Choose your desired time from the scroll bar and click ‘Next’. Click ‘Run the device’ and choose a device. Preset your desired functions such as Power ON/OFF, temperature, mode, and timer as per on the device’s functions. Click ‘Next’. Review your conditions and click save. Your automation will appear on the main Smart homepage.
Status Change
Click ‘When device status changes’ to create a condition based on any function on your device, for example turning the Power Off when any device function is changed (to act as a child lock)
Voice Control
Once your smart scenes are set up, you can use Amazon Alexa or Google Home Routines to operate the scenes via voice control. Refer to your Amazon or Google Home user
guides for instructions on how to pair your routine to smart scenes.

Operating your Device from the APP

Device settings:

Share devise with family members:

• The person you add will need to have the Goldair APP installed on their phone.
• Enter your family member’s details to share device operations with them.
• Tap ‘Confirm’ to complete the addition.

Remove a family member from the device:

• Tap ‘Share Devices’ to delete the number of the person you want to cancel. Tap ‘Confirm’ to confirm.

NOTE: There can only be one user operating the device at a time.
The APP needs to be closed on all other devices to enable the sharing to work.
NOTE: If someone else sets up their phone on the same device without using the ‘Device Sharing’ the original phone will be disconnected and the device will disappear from the device list.
Group your devices:
Devices within the same group can be controlled simultaneously

• Under the Create Group setting, select all devices you wish to group together. Click ‘Save’
• Enter a group name of choice. Click Save.

You can now operate all devices within this group simultaneously.
Ungroup your devices:

• Click on to pen icon within the device group
• Select ‘Dismiss Group’

You have now deleted your group.

**How to connect to your Alexa devices

**

• Download the Goldair App and pair your device.
  Note: change the name of the device to an easily identifiable name such as ‘Bedroom Fan’ or ‘Living  Room Heater’
  Note: Ensure you have downloaded and configured the Amazon Alexa app. Please see your Alexa device’s user manual for instructions.

• On the main page of the Alexa app, click the ‘More’ icon in the bottom right-hand side of the page. Click on ‘Skills and Games’
  

• Click on the search icon in the top right-hand corner

• Click on the search icon in the top right-hand corner
  

• Type ‘Goldair’ in the search bar and click to proceed.
  

• Click ‘Enable to use’ and type your phone number/email address and password and click ‘Link Now’
  

• Click ‘Authorise’ and go back to the Home screen. Your devices will now appear and you can operate them using voice control.

SUGGESTED VOICE COMMANDS

Note: Amazon and Google are in control of voice control functionality and terminology. Not all functions available via the controller or APP can be controlled via voice command.
Voice control on your device will allow you to turn ON and OFF. Suggested voice commands to work with your Alexa device are:
Turning ON/OFF
Alexa, turn “Device Name” ON
Alexa, turn “Device Name” OFF
How to connect to your Google Home devices
Follow the below instructions to connect your device to Google Home

• Download the Goldair App and pair your device.
  Note: change the name of the device to an easily identifiable name such as ‘Bedroom Fan’ or ‘Living Room Heater’
  Note: Ensure you have downloaded and configured the Google Home/Assistant apps. Please see your Google device’s user manual for instructions.

• On the main page of the Google Home app, click the ‘+’ icon in the top left-hand side of the page.
  

• Click ‘Set up device’
  

• Click ‘Works with Google’
  

• Type ‘Goldair’ in the search bar and click to proceed.
  

• Type your phone number/ email address and password and click ‘Link Now’

• Click Authorise and all devices from your Goldair App will appear on the screen.
  

• You have the option to add these to a particular room in your home
  

• When you go back to the Home screen, your devices will now appear and you can operate them using voice control.

SUGGESTED VOICE COMMANDS

Note: Amazon and Google are in control of voice control functionality and terminology. Not all functions available via the controller or APP can be controlled via voice command.
Voice control on your device will allow you to turn ON and OFF. Suggested voice commands to work with your Google device are:
Turning ON/OFF
Ok Google, turn “Device Name” ON
Ok Google, turn “Device Name” OFF

New Zealand
PO Box 100707,
North Shore Mail Centre,
Auckland, 0745
www.gold air.co.NZ
Australia
PO Box 574,
South Morang,
Victoria, 3752
www.goldair.com.au

References

• Goldair Australia
• Goldair Australia
• Gold Air
• Goldair Australia

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>