OLIGHT Obulb Pro Multicolor Light with Bluetooth App Control User Manual
- June 5, 2024
- OLIGHT
Table of Contents
** Multicolor Light with Bluetooth App Control
User Manual
**
**HOW TO USE THE APP
**
The OLIGHT APP is designed to connect and control compatible Olight devices
through Bluetooth mesh networking.
DOWNLOAD AND INSTALLATION:
Before using, please download and install the OLIGHT APP on your mobile phone.
- For iPhone, please download it from the “App Store”.
- For Android phones, please download them from the “Google Play Store”.
DEVICE CONNECTION
- Set the Obulb Pro to its network setting mode.
- Enable the Bluetooth and GPS functions on your mobile phone and launch the OLIGHT APP.
- Search and add the Obulb Pro.
- Add successfully.
OBULB PRO NETWORK SETTING MODE
While the Obulb Pro is turned on with the white light setting, press and hold its button for 5 seconds until it flashes red and then green to enter the network setting mode. In this mode, users can search and add the Obulb Pro with the OLIGHT APP.
NOTES:
- If the Obulb Pro has not been connected within 3 minutes, it will exit the network setting mode automatically. You can also exit the mode with any button operation on the Obulb Pro.
- The Obulb Pro can only be searched and added to one mobile phone. If you want to control it with another mobile phone, you can share your current network data by generating a QR Code with the OLIGHT APP. Alternatively, you can disconnect the Obulb Pro and use another device to search and add it.
- The OLIGHT APP cannot control the Obulb Pro if its button is locked out. Please unlock the button to enable control.
- When the OLIGHT APP imports network data from a QR code, the original data in the OLIGHT APP will be overwritten.
- The number of Olight devices connected determines how many mobile phones are allowed for simultaneous control via network data sharing. If there is only one Olight device connected, only the first phone that searched and added the Obulb Pro can control it. If there are two or more Olight devices connected, control can be shared among the same number of phones. If another phone is not able to connect to a device after scanning the QR code, it may be because the number of phones exceeds the number of devices. To ensure a successful connection, please disconnect the device from your previously connected phone.
- By generating a QR code, the OLIGHT APP can share a connected device to another phone so that they can also have control. Settings and preferences like product names or pictures cannot be shared. Once the QR code is shared, the OLIGHT APP will not synchronize any new changes unless a new QR code is generated and shared again.
- Frequent operation or multi-device control may lead to data overload and cause the OLIGHT APP to respond slowly or stop responding. Please try again or refresh the status.
- OTA update is only available for Android phones.
OBULB PRO AUTO SLEEP
If the connected Obulb Pro is left without operation for 8 hours, it will enter sleep mode automatically and the OLIGHT APP will lose control of it. To regain control, please wake up the Obulb Pro with any button operation or by charging it.
SEARCHING AND ADDING THE BULB PRO
Before searching and adding the Obulb Pro, please enable the Bluetooth and GPS functions on your mobile phone. After that, set the Obulb Pro to the network setting mode and launch the OLIGHT APP.
1. Tap “Add New Device” to search for a new Olight device.| 2. Tick the MAC
address of the Obulb Pro, and tap “OK” to add it.
---|---
| 
3. After it is added, the Obulb Pro will appear in the “My Device” list.
Users
can turn it on/off by tapping the control slider or access the control panel
by tapping the device entry.
If the OLIGHT APP is re-launched, it reverts to the “My Device” list directly
with all the devices connected before on display. If a device is greyed out,
it is offline. To bring it back online, please make sure that the device is
not turned off or in sleep mode, and then refresh the status.| 4. Tap the
button icon to turn the Obulb Pro on and activate more control options on the
control panel.
| 
5. With the “Mode” tab, the control panel allows users to change modes,
adjust brightness levels, and turn the Obulb Pro off. Tap “More” to enter the
Color Wheel.| 6. With the “Color” tab, the control panel allows users to
customize colors with a color wheel, adjust brightness levels, and turn the
Obulb Pro off.
| 
7. ADD GROUPS
Users can control their Olight devices in groups after including several
devices together. It supports 8 groups at the most.
1. Tap “ + ” in the upper right corner of the control panel to enter the
“Select Group” page.| 2. Tick the relevant group number to add the Obulb Pro
to the group that
you like.
| 
8. GROUP CONTROL
1. After the Olight devices have been grouped, tap “…” in the upper right
corner of the “My Device” page and select “Groups” to access group control.|
2. Tap the control slider to turn on/off all the devices in the same group.
| 
3. Edit the group name by tapping it.| 9. EDIT DEVICE INFO
Users can edit the name and picture of a device in the control panel.
1. Tap ” ” to enter the “Edit Device Info” page.
KICK OUT
Tap “Kick Out” to delete the device from the Bluetooth mesh network, and it
will no longer be displayed in the device list.
| 
2. Customize the name and picture of the device by tapping the corresponding
area.| 10. DELETE DEVICES
In the device list, you can delete devices from the Bluetooth mesh network so
that they are no longer displayed in the device list.
1. Long press on any device entry;
2. Tick the relevant device;
3. Tap “Delete”.
---|---
| 
11. SHARE CONNECTED DEVICE DATA
The OLIGHT APP allows users to share connected devices in a mesh network to
another mobile phone. This allows the other phone to control the device by
simply scanning a generated QR Code.
1. Tap “…” to select “Share”;| 2. Tap “EXPORT”;
3. Tap “GENERATE QR CODE”.
| 
By scanning the QR code, the connected device list and ON/OFF status will
be quickly imported to another phone.
Note: Please install the OLIGHT APP on the other phone before sharing the
Obulb Pro.
4. Tap“IMPORT”.
5. Tap “SCAN QR CODE”, and scan the QR code to import.| 12. OTA UPDATE
On Android, the OLIGHT APP can update the firmware on the compatible Olight
devices wirelessly via Bluetooth.
Please download the firmware package from the official website
(https://olightworld.com), unzip it, and then upload it to your mobile phone
to use it.
1. Tap “ ” in the upper right corner of the “Edit Device Info” page.
2. Select the downloaded firmware file and then start the update.
| 