AemoToy LY1 Bluetooth Sports Headphones User Manual
- June 5, 2024
- AemoToy
Table of Contents
AemoToy
Bluetooth sports headphones Instruction LY1
Parameter
- Product Name: Bluetooth sports headphones
- Model: LY1
- Material: ABS+PC
- Transmission distance:10m
- Bluetooth Version: V5.0
- Battery capacity:120mAH
- Net weight:16.3g
- Input:5V=1A
- Frequency Range: 20-20000Hz
- Charging Time: about 1.5 hours
- Talking/Music time: about 10 hours
- Standby Time: about 88 hours
Pairing method
- Press and hold the power button until the red and blue lights flash alternately.
- Turn on the phone Bluetooth search to Bluetooth name LY1
- Click pairing and wait for 3 seconds to link successfully.
Button Operation
- Pause/Play: Short press
- Reject the call: Long press for 3 seconds
- Answer/hang up: Short press
- Volume -: Short press volume down/Hold press 3 seconds for Previous Song
- Volume +: Short press volume up/Hold press 3 seconds for the Next Song
Safety Precautions
- Please don’t put it in high(above 45℃）or low(under 0 ℃ temperature condition
- Please don’t use the indicator light too close to children’s or animals’ eyes
- Please don’t let it close to liquid and wet it , otherwise, it will cause the headset damage badly, which these are not guarantee
- Please don’t dismantle or modify the headset,otherwise, it will be possible to cause headset damage or burn ,which are not in guarantee
- Please don’t use the Bluetooth earbuds in thunderstorm weather, the thunderstorm maybe cause it to work wrong, and increase the risk of electric shock
Note: If the long-term pairing is not successful, Please clear all pairing records before Bluetooth on your phone, And refresh the phone Bluetooth interface, Re-search for “LY1 ” Bluetooth device name and click Pairing
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>