eVacuumStore Wonder.2 Canister Vacuum Cleaner Instructions
- June 5, 2024
- eVacuumStore
Table of Contents
eVacuumStore Wonder.2 Canister Vacuum Cleaner
UPPER BODY
KEY | PART NUMBER | DESCRIPTION |
---|---|---|
1 | B338-62SV | FBI Bezel |
2 | B338-8300 | Lid Hinge E-Clip |
3
| Not Available| Dark Green Bag Door Lid (WONDER.2)
B338-56AG| Light Green Bag Door Lid (WONDERP.2)
B338-9200| Red Bag Door Lid and Top Housing (WONDER.4SS)
B338-9300| Reflex Blue Bag Door Lid (WONDERP.CPN, WONDERP.FSN)
B338-9500| Matte White Bag Door Lid (WONDERP.TAD, WONDERP.TAP)
4| B338-63SV| Bag Lid Latch
5| B338-2914| Lid Hinge Cover
6| B338-4600| Lid Hinge Pin
7| B338-3000| Hinge Seal Grommet
8| C338-0300| FBI Assembly
9| B338-2600| Main Inlet Seal
10| B338-1614| Main Suction Inlet (Straight Suction version)
B338-9100| Main Suction Inlet (Powered version)
11| Not Available| Wiring Harness (Powered versions only)
12| Not Available| Lid Wiring Cover Small
13| Not Available| Lid Wiring Cover Large
14| B338-60SV| Variable Speed Slide
15| B338-8100| Variable Slide Bushing
16| B338-5914| Variable Speed Slide Cover
17| B338-5814| On/Off Foot Pedal
18| B338-6600| Spring On/Off Foot Pedal
19| Not Available| Back Docking
20| Not Available| Cord Reel Plug Pocket
21| B338-1214| Cord Strain Relief
22
| B338-55PG| Dark Green Top Housing (WONDER.2)
B338-55AG| Light Green Top Housing (WONDERP.2)
Order B338-9200| Red Top Housing (WONDER.4SS)
Not Available| Reflex Blue Top Housing (WONDERP.CPN, WONDERP.FSN)
Not Available| Matte White Top Housing (WONDERP.TAD, WONDERP.TAP)
23| B338-2500| Lid Latch Flat Spring
24
| B338-52B4| HEPA Filter Bulk
SF19| HEPA Filter Set (Includes Secondary Foam Filter)
SF19G| HEPA and Granulated Charcoal Secondary Filter Set
25| Not Available| Wire Strain Relief
LOWER BODY
KEY | PART NUMBER | DESCRIPTION |
---|---|---|
1 | B338-23B4 | Bag Compartment Filter Frame |
2
| B338-8000| Foam Secondary Filter Bulk
Not Available| Granulated Charcoal Secondary Filter Bulk
SF19| HEPA and Foam Secondary Filter Set
SF19G| HEPA and Granulated Charcoal Secondary Filter Set
3| SCH-6| HEPA Bag (6 Pack)
RCHC-6| RICCAR Charcoal/HEPA Bag (6 Pack)
4| B338-1700| Bag Compartment Seal
5| B338-4700| HEPA Filter Seal
6| B338-3300| Main PCB w/Variable Speed Control (Straight Suction)
B338-9000| Main PCB w/Variable Speed Control (Powered version)
7| B338-6500| Spring Bag Holder
8| B338-50B4| Bag Holder
9| B338-0414| Bag Compartment Insert/Motor Cover
10| B338-0600| Cord Reel
11| C338-0200| Wheel Assembly (Includes bearing, axle, e-clip)
12| B338-4800| Cord Reel Cooling Tube
13| B338-0914| Back Docking
14| C338-0614| Front Caster Assembly
15| B338-0714| Handle Grip
16| B338-0114| Bottom Housing
17| B338-4400| Motor Compartment Seal
18| B338-4500| Motor Compartment Sound Dampener
19| Not Available| Bumper
20| B338-5100| Motor Compartment Wire Grommet
21| B338-3100| On/Off Switch
MOTOR ASSEMBLY
KEY | PART NUMBER | DESCRIPTION |
---|---|---|
1 | C338-0500 | Motor Assembly |
2 | B338-4100 | Motor Cocoon Back Vibration Rubber |
3 | Not Available | Motor Back Square Rubber Mount |
4 | B338-3700 | Motor Rear Cocoon |
5 | Not Available | Motor Sound Reduction Foam |
6 | Not Available | Motor |
7 | Not Available | Motor Cocoon Internal Foam Seal |
8 | Not Available | Motor Cocoon Vibration Isolation Pad |
9 | B338-3600 | Motor Front Cocoon |
10 | Not Available | Motor Cocoon Front Face Seal |
TOOLS &ACCESSORIES
Simplicity Model WONDER All Versions
KEY | PART NUMBER | DESCRIPTION |
---|---|---|
1 | C338-0700 | Straight Suction Hose Assembly |
C338-0600 | Powered Hose Assembly | |
2 | C338-1100 | Straight Suction Wand Assembly |
C338-1000 | Powered Wand Assembly | |
3 | B338-8800 | Replaceable Wand Tip |
4 | B226-1149 | Tool Adapter |
5 | B338-6900 | Tool Caddy |
6 | B338-7614 | 2 in 1 Tool |
7 | B338-5414 | Crevice Tool |
8 | B338-7800B | Microfiber Bare Floor Tool |
MFP-3 | Floor Tool Microfiber Pad (Package of 3) | |
9 | SPET-TOOL | Pet Hair Beware Pet Tool (WONDERP.TAD, |
WONDERP.TAP)
10| TB2-SW| Hand Held Turbo Brush (WONDERP.TAP)
11
| B338-7900| Rug Floor Combo Tool (WONDERP.TAP)
B226-1000| Snap on Base
BFP-3| Rug Floor Combo Tool Blue Mopping Pads (Package of 3)
WFP-3| Rug Floor Combo Tool White Polishing Pads (Package of 3)
12| KIT-BAG| Tool Bag (WONDERP.TAD, WONDERP.TAP)
13| D220-1414| Soft Carpet Baseplate (WONDERP.TAD,
WONDERP.TAP)
14| CTB4| Floor Turbo Brush Slider Knob Unbranded Bulk (WONDER.4SS)
COMPACT POWER NOZZLE
Simplicity Model WONDERP.CPN
KEY | PART NUMBER | DESCRIPTION |
---|---|---|
1 | B354-4900 | LED Board |
2 | B354-0300 | LED Reflector |
3 | B354-0400 | Circuit Breaker |
4 | B354-0500 | Motor Lead Cover |
5 | B351-7700 | Cord Assembly |
6 | D354-1500 | PC Board Assembly |
7 | B354-0600 | Balance Weight |
8 | D354-0300 | Bottom Housing Assembly |
9 | D354-0400 | Small Wheel Assembly |
10 | D354-0600 | Nozzle Cover w/Lens |
11 | B354-2300B | Basetray Cover |
12 | D354-0700 | Baseplate Assembly |
13 | B354-0700 | Baseplate Locking Screws |
14 | B354-0800 | Baseplate Seal |
15 | B354-0900 | Squeegee |
16 | C354-1300 | Agitator Assembly |
17 | D338-0300 | Neck Assembly |
18 | B351-7914 | Retainer Nozzle Plug |
19 | B351-8300 | Spring for Button |
20 | B351-8124 | Button for Wand |
21 | B351-8214 | Button Cover for Wand |
22 | D354-1100 | Motor Assembly |
23 | D354-1200 | Neck Lock Assembly |
24 | B354-1300 | Motor Gasket |
25 | B354-5200 | Belt |
26 | B354-1200 | Lens Cover |
27 | SCPN | Compact Nozzle Assembly |
FULL SIZE POWER NOZZLE
Simplicity Model WONDERP.FSN
KEY| PART NUMBER| DESCRIPTION| KEY| PART
NUMBER| DESCRIPTION|
---|---|---|---|---|---|---
1| D350-1500| Top Housing Assembly| 41| A430-0205| Screw #8 16 x2 .5|
2| B350-1515| Headlight Lens| 42| D351-2100| Steel Agitator Assembly|
3| D338-0200| Neck Assembly| 43| B351-4400| End Caps for Steel Agitator|
4| B350-4714C| Teflon Seal|
5| B351-7600| Pigtail Plug| 44| A113-2200| Motor|
6| B351-7914| Plug Retainer| 45| B350-2514| Poly V Belt|
7| B350-7700| Wand Release Axle| 46| A350-0000| Light Bulb 12v|
8| B350-7600B| Wand Release Spring| 47| B350-6197B| Reflector|
9| B351-7314| Wand Release Upper Pedal| 48| A350-0100B| Snap In Light Socket|
49| B123-2700| Wire Connectors Lg|
10| B351-7414| Wand Release Lower
Pedal
| 50| B350-8601B| Felt Seal for Belt Housing|
51| B350-1815| Height Adjust/LED Lens|
11| D350-5100| Hidden Raceway Assembly|
52| D350-3314| Belt Housing With Seals|
53| SFSN| Full Size Power Nozzle|
12| C350-5900| Pedal|
|
13| B350-2601| Tilt Lock Lever|
14| B350-2801| Tilt Lock Pin|
15| A732-8414| Screws Hi/Lo #8|
16| D350-9900| Bottom Housing Assembly|
17| B350-3400| Tilt Lock Link|
18| B350-3500| Tilt Lock Torsion Spring|
19| B350-2214B| Bottom Housing|
20| B350-8701B| Felt Seal for Bottom Housing|
21| B350-8414| Belt Housing|
22| C350-6731B| Rear Wheel Assembly|
23| B010-0210C| Back Wheel Pin 5mm x
38mm
|
24| D350-1100| 2.5A Switch|
25| C350-9700| Height Adjust Assembly|
26| C350-4300| LED Assembly|
35| C351-5700| Axle Stamping Assembly|
36| C350-9800| Height Adjust Bar Assembly|
37| B350-4000B| External Retaining Ring
5/16”
|
38| B350-3942| Axle Height Wheel w/
overmold
|
39| Not Available| Height Adjust Bar|
40| C351-5800| Bottom Plate w/seals Assembly|
KEY | PART NUMBER | DESCRIPTION |
---|---|---|
1 | A375-0100 | Locking Hex Nut |
2 | A375-0200 | Bearing |
3 | A733-1810 | Clamped Agitator Screw 80mm |
4 | A733-1800 | Clamped Agitator Screw 40mm |
5 | Not Available | Agitator Shaft |
6
| Not Available| Nylon Brush Strip Short (Standard)
Not Available| White Brush Strip Short
B351-1800| Natural Brush Strip Short
7
| B351-2100| Nylon Brush Strip Long (Standard)
Not Available| White Brush Strip Long
SBNW-4| White Brush Strip 4 pk (Includes long and short)
B351-1900| Natural Brush Strip Long
Not Available| Natural Brush Strip 4 pk (Includes long and short)
8| Not Available| Pulley
9| B351-4400| End Cap Cover
10| B375-3900| Felt Seal
11| B375-3600| Metal End Cap
12| B475-1800| Bearing Cartridge
13| B475-1900| Retainer Ring
14| Not Available| Agitator Core
15| D351-2100| Power Nozzle Agitator Assembly
TANDEM AIR POWER NOZZLE
KEY| PART NUM- BER| DESCRIPTION| KEY| PART
NUMBER| DESCRIPTION|
---|---|---|---|---|---|---
1| D220-2370| Nozzle Cover (STAPN.D)| 34| D475-0310| Hall Sensor Assembly
(STAPN.P)|
Not Available| Nozzle Cover (STAPN.P)|
2| B220-7814| Park| 35| B317-1400K| LED Board (STAPN.D)|
3| B018-0315C| Lens| B317-1600K| LED Board (STAPN.P)|
4| B220-2514| Furniture Guard| 36| D220-0114| Basetray Assembly|
5| B351-8214| Neck Button Cover| 37| B016-1914| Basetray Plug (STAPN.D)|
6| B351-8124| Neck Button| 38| B220-0114D| Basetray|
7| B351-8300| Spring| 39| 54.136| Rear Axle Clamp|
8| B220-7914| Neck| 40| B220-0900| Upright Stop Spring|
9| B354-2800| Neck Lock Ring| 41| D220-0714| Pedal Assembly|
10| B351-8400| Pigtail Cord| 42| B220-0714| Upright Stop Pedal|
11| B351-7914| Pigtail Plug Retainer| 43| B220-0800| Upright Stop Pedal Pivet|
12| A732-3000| E Clip (STAPN.D)| 44| D220-0631| Rear Wheel with Axle|
13| B223-2814C| Motor Support Boss| 45| B010-2800C| Large Wheel Axle|
14| See #27| Flat Belt Motor| 46| C220-0531C| Rear Wheel|
See #27| V Belt Motor| 47| B010-0001E| Small Wheel Axle|
15| B223-0114| Motor Housing| 48| C010-2714B| Small Wheel|
16| A733-5000| Screw M5 X 6mm Socket| 49| D010-2631| Front Wheel Assembly
Includes #47 & #48
|
17| B220-4414| Pivot Bushing|
50| B014-0814B| Flat Belt Single (STAPN.D)|
18| B220-4500| Felt Pivot Seal|
B014-1200| Lifetime Belt (STAPN.P)|
19| See #58| Scroll Housing Right|
51
| D012-2300| Flat Belt Agitator Assembly (STAPN.D)|
20| A733-3300| Washer (Behind Fan)|
21| B220-4314| Motor Fan|
D013-0400| V Belt Agitator Assembly (STAPN.P)|
22| A733-2200| Washer|
23| A432-0605| Hex Nut|
52| D220-0414| Baseplate Assembly|
24| B220-4114| Scroll Housing Left|
53| B370-1843| Front Wheel Assembly with Bushing|
25| A732-8314| Pan Head Screw #8 X 5/8|
26| B480-4514| Motor Inlet Seal|
54| B370-1700B| Bottom Plate Axle|
27
| D223-1914| Flat Belt Motor Assembly (STAPN.D)|
55| B220-0414| Baseplate Cover Screw|
56| B015-3000B| Squeegee|
D223-2500| V Belt Motor Assembly (STAPN.P)|
57| B220-0314| Baseplate|
58
| STAPN.D| Delux Tandem Air Power
Nozzle (Flat Belt)
|
28| A732-2500| Screw M4x12|
29| B034-0100| Strain Relief Washer|
STAPN.P| PremiumTandem Air Nozzle (w/ Belt Protection)|
30| B220-0214| Inlet Duct Cover|
31| A350-0500| 2 Amp Circuit Breaker (STAPN.D)|
59
|
D220-7914
| Tandem Air Power Nozzle Neck Assembly Order for Replacement of #19|
32| B223-1700| Circuit Breaker Harness (STAPN.D)|
|
33| A732-8414| Screw Hi Lo #8 x 7/16”|
TANDEM AIR AGITATOR
KEY | PART NUMBER | DESCRIPTION |
---|---|---|
1 | A375-0100 | 1/4-28 Locking Hex Nut |
2 | B013-1600 | Metal End Cap |
3 | A733-1810 | Agitator Screw 80mm |
4 | B475-1900 | Retainer Ring |
5 | B375-3900 | Felt Seal |
6 | A375-0200 | Bearing |
7 | B220-1200 | Pulley for Flat Belt (STAPN.D) |
B013-1400 | Pulley for Lifetime Belt (STAPN.P) | |
8 | B013-0301 | White Brush Strip Short |
9 | Not Available | White Brush Strip Long |
10 | B013-1500 | Edge Brush Bearing Holder with Bearing |
11 | D012-2300 | Flat Belt Agitator (STAPN.D) |
D013-0400 | Lifetime Belt Agitator (STAPN.P) |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>