FOREVER Laser Dark Low Temp A + B Paper User Manual

FOREVER Laser Dark Low Temp A + B Paper

Set Print Mode

Uninet iColor 2 Step Standard

• Must be in Overprint
• Page size must match the media being used. (A3, A4, A4 XL)
• White coverage: at least 150%

Temperature: 310ºF/154ºC

1. iColor 500/600: Ultra Heavy 1
2. iColor 550/540: DO NOT USE
3. iColor 560: DO NOT USE
4. iColor 650: Ultra Heavy 1
5. iColor 800: Thick to 163g/220g

• Make sure the design is mirrored
• Print side is coated side
• Preheat the closed press to 310°F / 154°C. Wait for the heat press to reach the desired temperature before moving forward.
• Center the A – sheet on the lower platen, and ensure that the print side is face UP.
• Place the B – sheet ahesive side DOWN on top of the A – sheet. Fold a corner of the B sheet for an easy peel.

HOT PEEL

• hold the A – sheet flat on the press and peel the B – sheet away in a smooth, low, and slow continuous motion.
• Use a scissor or rotary cutter to cut around the A sheet, removing any residue left during the marrying process.
• Thread your garment onto the heat press. Align your image on the garment and fix it in place using heat resistant tape.
• Cover with a sheet of parchment or kraft paper and press at 310°F / 154°C for 30 seconds. Press with med-high pressure.
• Allow the garment to cool completely. With the garment on a flat surface, peel away the A-sheet in a smooth, gentle, slow motion.

Fixing (optional)

• Place the garment back on the heat press. Cover image with parchment or kraft paper. Press for 10 sec at 310°F / 154°C

REFERENCE TABLE

IMPORTANT: All values are for reference. Toner types vary. Optimal temperature and time should be found through experimentation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>