MOB MO8602 Power Bank User Manual
- June 3, 2024
- MOB
Table of Contents
MO8602 Power Bank
User Manual
MO8602 Power Bank
Hereby, MOB, declares that item MO8602 is in Compliance with the essential
requirements and other relevant conditions of Directive 2014/30/EU. The full
text of the EU declaration of conformity is available at the following
internet address: www.momanual.com. MOB, PO BOX
644, 6710 BP (NL).
Hereby, MOB, declares that item MO8602 is in Compliance with the essential
requirements and other relevant conditions of Directive 2014/30/EU. The full
text of the EU declaration of conformity is available at the following
internet address: www.momanual.com.
MOB, PO BOX 644, 6710 BP (NL).
Powerbank
- Make sure the power bank is fully charged before use.
- Charging electronic digital equipment: Please choose a suitable connector according to the requirements of your electronic device. Whilst your device is connected to the power bank, it will begin charging automatically, if the power bank is charged. Please unplug the charging wire after the digital product is fully charged.
- Caution: The output power of the power bank is 5V/1A, please check the input specification of your product before charging with the power bank.
Charging power bank:
Connect the power bank with a DC USB port. Plug the micro USB end of the cable
into the power bank. When charging, the indicator light flashes red and blue
alternately. When the indicator light turns red and static, that means the
power bank is fully charged.
Specification:
Input: | DC5V/1A |
---|---|
Output: | 5V/1A |
Capacity: | 2200mAh |
Power efficiency: | 70% |
Charging time: | 4-5 hours approximately |
Cycle life: | 500 times |
Protection Voltage: | 5.5V |
- When connecting the power bank to the device, please use charging cables and connectors provided by the authorized maker. The use of charging cables or connectors from unauthorized makers may cause severe or fatal injuries and property loss and damage to the product and the device.
- Power Bank is compatible with Apple® Product USB Cable/ adapter (Not Included).
- If the product does not start charging when it connects to the device, please disconnect all cables and try again.
- The battery can explode if disposed of in a fire
- Dry location use only
- Shock hazard Do not open
- Do not overheat batteries by exposure to high temperatures and direct sunlight
- A battery should NOT be exposed to water
- Exhausted batteries should be immediately removed from the equipment and disposed of only through approved recycling centers
- Please remove the power source after full charging
- Please keep out of reach of children. Do not leave the product unattended whilst in use
- Charge time may vary by device
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>