EXIT 35.30.46.00 Deluxe Leather Premium Spa User Manual
- June 5, 2024
- EXIT
Table of Contents
EXIT 35.30.46.00 Deluxe Leather Premium Spa
Important safety rules: Before installing and using this product read, understand, follow all instructions carefully and keep it for future reference!
Part reference
NOTE: Drawing for illustration purpose only. Actual product may vary. Not to scale. Before as-sembling your SPA-pool, layout and review the contents to become familiar with all the parts you will be using during the assembly:
Introduction
Have fun, be active and play outdoors……
That’s what keeps driving us to develop innovative, quality toys for cool kids
and parents. We do everything possible to develop safe products for children.
As our products are classed as toys, we comply with the toughest consumer
safety regulations. Before launching our products onto the market, we have
independent tests carried out for certification. We also continuously test our
production runs and periodically have independent tests performed again as a
further check. Only products which live up to the highest EXIT Toys standard
are marked with and recognized by the EXIT-brand.
“We want to thank you for your custom and your confidence in this product.
We’re sure your kids will have as much fun as we did during development. Being
open-minded, we really appreciate all comments and ideas which will help us
improve our products or develop new ones. You are invited to send your ideas
to us at info@exittoys.com”
Please visit www.exittoys.com and discover more
cool new products.
Guidelines for safe use
Carefully read, understand, and follow all information in this user manual before installing and using the spa. These warnings, instructions, and safety guidelines address some common risks of water recreation, but they cannot cover all risks and dangers in all cases. Always use caution, common sense, and good judgment when enjoying any water activity. Please read it carefully and keep it for future reference.
Non Swimmers safety
- Continuous, active, and vigilant supervision of weak swimmers and non-swimmers by a competent adult is required at all times (remember that children under five are at the highest risk of drowning)
- Designate a competent adult to supervise the spa each time it is being used;
- Weak swimmers or non-swimmers should wear personal protection equipment when using the spa;
- When the spa is not in use, or unsupervised, remove all toys from the SPA pool and its surroundings to avoid attracting children to the spa.
Safety devices
- It is recommended to install a barrier (and secure all doors and windows, where applicable) to prevent unauthorized access to the spa;
- Barriers, spa covers, pool alarms, or similar safety devices are helpful aids, but they are not substitutes for continuous and competent adult supervision.
Safety equipment
- It is recommended to keep rescue equipment (e.g. a ring buoy) by the spa;
- Keep a working phone and a list of emergency phone numbers near the spa.
Safe use of the spa
- Encourage all users especially children to learn how to swim;
- Learn Basic Life Support (Cardiopulmonary Resuscitation – CPR) and refresh this knowledge regularly. This can make a life-saving difference in the event of an emergency;
- Instruct all spa users, including children, what to do in case of an emergency;
- Never dive into any shallow body of water. This can lead to serious injury or death;
- Do not use the swimming spa when using alcohol or medication that may impair your ability to safely use the spa;
- When spa covers are used, remove them completely from the water surface before entering the spa;
- Protect spa occupants from water-related illnesses by keeping the spa water treated and practicing good hygiene.Consult the water treatment guidelines in the user’s manual;
- Store chemicals (e.g. water treatment, cleaning or disinfection products) out of the reach of children.
- Use the signage as outlined below;
- Removable ladders shall be placed on a horizontal surface.
WARNING:
- a drained spa outdoors may cause unknown hazards.
- Installation and assembly shall be done by adults.
- Read and follow the instruction for use and maintenance to ensure a safe use of the swimming spa kit. Not following the instructions for use and maintenance can cause serious health hazards, in particular for children. WARNING: Only for domestic outdoor use.
- Drowning hazard. Children can drown in very small amounts of water. WARNING: Empty the spa when not in use. Do not leave a small spa empty outdoor. WARNING: Keep children under
- supervision in the aquatic environment.
- No diving.
READ ALL INSTRUCTIONS AND SAFETY WARNINGS IN THIS MANUAL
Failure to follow the warnings and instructions in this manual may result in
serious injury, drowning or electric shock.The safety of your children is left
on your hand! The risk is the highest for children aged below 5. Be high alert
all the time.
Always comply with the following instructions:
- The children should be under close and constant supervision;
- Designate one security responsible;
- Always designate a responsible person to mange spa and spa area;
- Adult supervision should always be relevant to the number of people using the spa;
- Wet the nape, chest and legs before entering the water;
- Learn the safety gestures and especially the specifics to children;
- Prohibit diving and jumping;
- Prohibit running, splashing games around the spa;
- Do not let an unattended child who does not swim use the spa with no life-jackets on;
- Do not leave any players around and in the basin unattended;
- Always keep the water treatment products out of reach of all children.
If incident occurs remove the injured person or child from the spa and spa area Contact emergency services for advice and guidance on how to treat injured person or childThe hot tub’s electrical connections must be installed in the electrical safety zones labelled 1, 2 or outside all safety zones. The measured zones are limited by walls and fixed partitions.
DANGER
Risk of accidental drowning:
- Extreme caution must be exercised to prevent unauthorized access by children.
- Inspect the spa cover regularly for leak, premature wear and tear, damage or signs of deterioration. Never use a worn or damaged cover: it will not provide the level of protection required to prevent unsupervised access to the spa by a child.
- Always lock the spa cover after each use.
Risk of injury:
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Risk of Electric Shock:
- Do not permit any electrical appliances, such as a light, telephone, radio or television within 1.5m (5 feet) of a spa tub.
- Do not use the spa when it is raining, thundering or lightning..
WARNING
-
To reduce the risk of electric shock, do not use an extension cord, timers, plug adapters or converter plugs to connect the unit to electric supply; provide a properly located outlet.
-
The spa electrical appliance should be supplied through a residual current device (RCD) having a rated residual operating current not exceeding 10mA.
-
Parts containing live parts, except parts supplied with safety extra-low voltage not exceeding 12V, must be inaccessible to occupants in the spa.
-
Parts incorporating electrical components, except remote control devices, must be located or fixed so that they cannot fall into the spa.
-
Residential electrical connection box must be located safely with a distance of at least 2m away from the spa.
-
Electric installation should fulfill the local requirement or standards.
-
This appliance can be used by children aged from 8 years and above and persons with reduced physical,sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
-
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
-
To reduce the risk or injury, do not permit children use this product unless they are closely supervised all times.
-
To reduce the risk of child drowning, supervise children all times. Attach and lock spa cover after each use.
-
Make sure the floor is capable of supporting the expected load (≥ 500kg/m²).
-
Adequate draining system must be provided around the spa to deal with overflow water.
-
To avoid damage do not leave the appliance empty for an extended period.
-
To avoid damage to the pump, the spa must never be operated unless the spa is filled with water.
-
Immediately leave spa if uncomfortable or sleepy.
To reduce the risk of injury : -
Lower water temperatures are recommended for young children and when spa use exceeds 10 minutes.
-
In order to avoid the possibility of hyperthermia (heat stress) occurring it is recommended that the average temperature of spa-pool water should not exceed 40°C (104°F).
-
Since excessive water temperatures have a high potential for causing fetal damage during the early months of pregnancy, pregnant or possibly pregnant women should limit spa water temperatures to 38°C (100°F).
-
Before entering a spa or hot tub the user should measure the water temperature with an accurate thermometer since the tolerance of water temperature regulating devices varies.
-
The use of alcohol, drugs or medication before or during spa use may lead to unconsciousness with the possibility or drowning.
-
The use of alcohol, drugs, or medication can greatly increase the risk of fatal hyperthermia in spas.
-
The causes and symptoms of hyperthermia may be described as follows:
-
Hyperthermia occurs when the internal temperature of body reaches a level several degrees above the normal body temperature 37°C (98.6°F). The symptoms of hyperthermia include an increase in the internal temperature of body, dizziness, lethargy, drowsiness, and fainting. The effect of hyperemia include failure to perceive heat; failure to recognize the need to exit spa; unawareness of impending hazard; fatal damage in pregnant women; physical inability to exit the spa; and unconsciousness resulting in the danger
of drowning. -
Obese persons or persons with a history of heart disease, low or high blood pressure, circulatory system problem, or diabetes should consult a physician before using a spa.
-
Persons using medication should consult a physician before using a spa since some medication may induce drowsiness while other medication may affect heart rate, blood pressure and circulation.
-
Check with doctor before use if pregnant, diabetic, in poor health, or under medical care.
-
People with an infectious disease should not use a spa or hot tub.
-
To avoid injury exercise care when entering or existing the spa or hot tub.
-
Water temperature in excess of 40°C (104°F) may be injurious to your health.
-
Never use a spa or hot tub alone or allow others to use the spa alone.
-
Do not use a spa or hot tub immediately following strenuous exercise.
-
Do not put the spa under 0°C (32°F) environment in order to avoid freezing if there is still water in the spa.
-
Do not turn on the spa when the water is frozen.
-
Never pour water with a temperature higher than 40°C(104°F) into the spa directly.
-
Always unplug this product from the electrical outlet before removing, cleaning, servicing or making any adjustment to the product.
-
Never jump or dive into a spa or any shallow body of water.
-
Do not bury the electrical cord. Locate the cord where it will not be damaged by lawn mowers, hedge trimmers and other equipment.
-
Do not attempt to plug in or unplug this product while standing in water or when your hands are wet.
-
Do not use the spa if damaged in delivery and/or malfunctioning in any way.
-
Do not add bath oil or bath salt to the spa water.
-
Do not leave an empty spa outside.
-
To prevent resetting of the thermal cut out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
Installation
Site selection
WARNING: Before proceeding to install your spa, please make sure that the
, Spa installed on inadequately level surfaces are subject to leaking. forming
irregularities or collapses. which can result in property damage or serious
injury for those in or around the spa area!
CAUTION: Please choose your set-up area carefully as lawn and other
desirable vegetation undereath the ground cloth (if applicable) wil die.
furthermore, try to avoid setting the ground cloth.
future location meets the following conditions:
- A level place in order to avoid any defect, hernia or leakage.
- Wide enough to support the spa and its pump unit.
- Able to support more than 500 kg/m².
- Sheltered from the sun and bad weather.
- Clean and free from sharp objects.
- Devoid of aggressive vegetation on the ground.
Failure to comply with these rules may result in property damage or personal injury. regularly switched on
RCD test
WARNING: The RCD plug must be tested before each use. Do not use if RCD test
fails Grounding 
Assembling
Spa cover and security
After each use, the control panel must be locked and the spa must be coated
with its
Warning : Do not leave spa unattended while filling with water. Make sure
the drain fitting is plugged securely and the cap is in place. Start filling
the spa with water. After about 1-inch of water is on the bottom, stop filling
and smooth wrinkles out of the bottom of the spa. Pull the outer wall out from
the top edge, all around the bottom of the spa, so that it fills evently.
Continue filling the spa until waterflevel. 
top cover and it must be attached to the base protector with the safety buckles. Each safety buckles has a lock system; closed buckle, the latch in up position locks the buckle, the latch in down position unlocks the buckle. The top cover keeps the heat from the water and secures the spa.
Usage
Control panel
Once powered-up, the LED displays the current water temperature automatically.
The temperature units selector changes the temperature units from Celsius
degrees to Fahrenheit degrees. 
Press the temperature adjustment buttons, then the screen will flash. When it is flashing, you can set the desired temperature. The value will increase or decrease 1 degree at once. The temperature could be set between 30°C to 40°C (86°F to 104°F). To lock or unlock the control panel, press the Lock button and hold 3 seconds. Lock the control panel when you are away to prevent other people come to change your settings.
Press the massage button to activate the bubble massage system, the green
indicator light turns on. It can be turned off by pressing it again.
Note:
- The massage system will stop automatically after 30 minutes of operation. Re-activate the massage function by pressing the massage button again.
- When filter button is on, pressing bubble button will exchange filter mode into massage mode: filter indicator light will turn off and massage indicator light turn on. If press the bubble button again, the massage mode will be changed back to filter mode.
Press the filter button to activate the water filtration. The green
indicator light will turn on when the filtration system is activated.
Note: – If massage function is on, the filtration can’t be activated.
Press the heating button to activate water heating and filtering system
at the same time. The green indicator light of filter and red indicator light
of heating will turn on at same time. The pump does not stop heating until the
current water temperature reaches the set temperature; and the heating system
will restart after the current water temperature drops 2°C below the set
temperature automatically. Maximum heating temperature: 40°C (104°F)
Important:
After 150 cumulative hours of filtration operations, an audible alarm will
sound and the LCD display will show the characters CHG, followed by FIL, to
remind you to change or clean the filter. You can hold the filtering button 5
seconds to turn off the buzzing. The filtering system will turn off, you can
press the button to active the filtering system again.
Note :
- With the heating system staring, the filtration system will start working together.
- After turning off the heating system, the filtration system will still work.
- If the massage function is active, the filtration and heating functions can not be activated.
Spa cover and security (optional)
After each use, the control panel must be locked and the spa must be coated
with its top cover and it must be attached to the base protector with the
safety buckles. Each safety buckles has a lock system ; closed buckle, the
latch in up position locks the buckle, the latch in down position unlocks the
buckle. The top cover keeps the heat from the water and secures the spa.
Water maintenance
WARNING: A bad spa water quality can harm your health.
Depending on the frequency and conditions of use:
- The filter cartridge should be regularly cleaned (150 hours max.).
- The filter cartridge should be replaced every 1 to 2 month.
- The spa water should be changed every 15 to 30 days.
Use a water test kit to control the parameters of the water before using the spa, or at least once a week. Use disinfection products for the spa. The treatment products should be used with caution and it is imperative to refer to their instructions. Damage resulting from improper use of treatment products is not covered by warranty (overdose, shock treatment, …).
-
Water balance
The water balance (pH) must be maintain between 7 and 7.4. -
Water Sanitation
To sanitize the spa water, we suggest using an active oxygen-based treatment or bromine placed in a floating dispenser. (Dispenser sold separately).
Maintenance
Cleaning and replacing filter cartridge
Dirty filter cartridge may contaminate the spa water and cause damage to the
heatingfunction. 1. Unscrew the filter case by turning it counter-clockwise.
Take out the filter cartridge from the case. 2. Rinse off the filter cartridge
with a garden hose. If the filter cartridge remains dirty and discoloured, the
filter cartridge should be replaced. 3. Put back the cleaned filter cartridge
into his case and screw it to the spa.
Disinfection
Water Sanitation: To sanitize the spa water, we suggest using an active
oxygen-based treatment or bromine placed in a floating dispenser. (Dispenser
sold separately) If water is heavily polluted you should not use spa. Clean
spa with with specialist UV lighting equipment. Seek professional advice and
guidance before doing this.
Attention:
Detergent residues and dissolved solids from bathing suits and chemicals may
build up on the spa walls, Use soap and water to clean the walls and rinse
thoroughly with a garden hose using a direct powerful waterspray
Drainage and storage
- Check the stopper on the bottom of the spa and the drain cap.
- Unscrew the drain cap.
- Remove the stopper on the bottom of the spa. Completely drain all water from the spa spa.
- Once empty, the spa can be cleaned with soap and water Storage
- Press the bubbling button to blow out the water inside the jet holes. Unplug the pump, remove the filter cartridge from the inner wall of the spa.
- Use a towel to wipe off the spa, dry 24 hours.
- Unscrew the valves to deflate the spa.
- fold the spa.
It is recommended that store the SPA in its original package in a warm dry place.
Repair kit
Little holes or puncture can be repaired with the repair kit included and glue
reserved to spa liner.
- Find the leak.
- Thoroughly clean the area surrounding the leak.
- Cut a piece of repair material in round shape, which should be larger than the damaged area.
- Apply adhesive to the underneath side of the patch and around the area to be repaired.
- Put the patch on the damaged area and press down firmly. Allow 12 hours for repair to dry. After patch has dried, apply glue around the edges for a complete seal (dry 4 hours).
Troubleshooting
Common problems
Here are some useful tips to help you to diagnose and rectify common sources
of trouble.
Error code
If the screen displays an error code “Ex”, please refer to the table below.
E3, E4, E5, E6 error code
Cut of electricity for 5 minutes and reconnect. 
If error code is still displayed on the control Box, please do the
following instrutions:
- Check that the water line is between the high and low limits.
- Clean or replace the filter cartridge.
- Unscrew and clean the 2 nozzles (Entry and exit of water) i nside the spa and remove wastes if necessary (Neaf, hairs, fur, skin…)
- Check that the propeller of the filter pump does not contain foreign matter. Cut the spa again electrically for 5 minutes and re-connect it, if the error code is still displayed on the control box please contact the Service Center.
Warranty
EXIT Toys products have been inspected and found free of defects prior to
leaving the factory. EXIT Toys warrants this product against defects in
material and workmanship for a period of time, 1 year for the pump and 6
months for the liner,unless local law has special requirement. EXIT Toys
warrants this product begins on the date of purchase and EXIT Toys requires
presentation of the original proof to purchase to ascertain the date. During
the warranty period, EXIT Toys will either repair or replace, at its
discretion, any defective produces. Replacement products or repaired parts
will be warranted for only the unexpired portion of the original warranty.
Shipping cost policy
The return of defect parts to the authorized service center is at the charge
of the owner. On the warranty period, the return is at the charge of service
center.
Warranty policy
This limited warranty does not apply to any defect resulting from negligence,
accident, misuse, or other reason beyond EXIT Toys’s reasonable control,
included but not limited to: normal wear and tear, negligence or failure to
follow the product instructions, improper or inadequate maintenance;
connection to improper power supply; chemical water damage, loss of spa water,
unauthorized product modification or repair; use for a commercial purpose;
fire, lightening, flood or other external causes. This warranty is valid only
in the country of purchase in such countries where EXIT Toys sells and
services the same model with identical technical specifications. Warranty
service outside the country of purchase is limited to the terms and conditions
of the corresponding warranty in the country of service. Where the cost of
repairs or replacement is not covered by this warranty, EXIT Toys will advise
the owners and the cost shall be charged to the owner. This warranty only
applies to the original purchaser and terminates upon any transfer of
ownership. All repairs of which warranty claims are made must be pre-
authorized by a EXIT Toys service center. All the authorized selling dealer is
responsible for all in-field service work carried out on your EXIT Toys
product. EXIT Toys will not be liable for results of cost of workmanship from
an unauthorized service person.
Warranty registration
To validate your warranty, please register your product on our website EXIT
Toys : www.EXITToys.com It is essential that
all informations including customer name, date of purchase, serial number, spa
model are indicated. Without these information, the warranty will be invalid.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>