iHome B14 Series Wireless Earbuds User Guide
- June 3, 2024
- iHome
Table of Contents
Model: B14 Series
Wireless Earbuds
CHARGE BEFORE USE
CHARGING THE EARBUDS
USB-C charging cable (included)
USB AC adaptor (not included)
POWER ON/OFF
- Press and hold either Multi-Function Button (MFB) for 2 seconds to turn the earbuds ON.
- Press and hold either Multi-Function Button for 5 seconds to turn the earbuds OFF.
BLUETOOTH PAIRING
- When the earbuds are ON, they will automatically enter pairing mode.
- Select ‘kids B14’ on your Bluetooth-enabled device to connect.
- A voice prompt will sound to indicate pairing is complete. Earbuds will automatically connect to your Bluetooth device whenever it is in range.
MULTI-FUNCTION BUTTON
Speakerphone
Answer/End Call| Short press MFB
Reject Call| Long press MFB
Voice Assistant
ON/OFF| I Press MFB 3x
LED INDICATORS
Earbud Charging
Charging| Solid Blue LED
Fully charged| LED OFF
Bluetooth Audio
Play/Pause| Short press MFB
Volume Up| Press LEFT MFB for 2 sec
Volume Down| Press RIGHT MFB for 2 sec
Next Track| Quick double press LEFT MFB
Previous Track| Quick double press RIGHT MFB
Case Charging
Charging| Flashing Red LED
Fully charged| Solid Red LED
**** To prevent possible hearing damage, do not listen at high volume levels for long periods.
FCC ID : EMOB14A
IC : 986B-B14A
HVIN: B14a
FCC Information
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.
This device complies with Part 15 of the FCC Rules, operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B) / NMB-3(B)
ISED statements
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment.
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and
Economic Development Canada’s license-exempt RSS(s). Operation is subject to
the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This device complies with ISED RF exposure requirements, users can obtain
Canadian information on RF exposure and compliance.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
WARNING: Earbuds and cases may present a choking hazard or cause another
injury to small children. Keep away from small children. For your safety, do
not use earbuds if they would prevent you from hearing warning sounds, such as
while riding a bike, crossing the street, etc.
THIS IS NOT A TOY.
ONE-YEAR LIMITED WARRANTY For product support and warranty please visit:
www.ekids.com/support
Questions? Visitwww.ekids.com
©2021 SDI Technologies, Inc. All Rights Reserved.
iHome is a registered trademark of SDI Technologies Inc., used under license.
B14_052121-B
Printed in China
XX-B14 IB (English)
Size: 120 x 150 mm
Printing color: Black (1C + 1C)
Material: 85 gsm WF paper
May 21, 2021
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>