SONY SEL2470GM2 Interchangeable Lens Instruction Manual

June 5, 2024
Sony

Interchangeable Lens
Instruction Manual

**G**MASTER
FE 24-70mm
F2.8 GM Ⅱ
E-mount
SEL2470GM2

SONY SEL2470GM2 Interchangeable Lens - fig

 This instruction manual explains how to use lenses. Precautions common to all lenses such as notes on use are found in the separate “Precautions before using”. Be sure to read both documents before using your lens.
This lens is designed for Sony a camera system E-mount cameras. You cannot use it on A-mount cameras.
The FE 24-70mm F2.8 GM II is compatible with the range of a 3Smm format image sensor.
A camera equipped with a 35mm format image sensor can also be set to shoot at APS-C size.
For details on how t o set your camera, refer to its instruction manual.
For further information on compatibility, visit the website of Sony in your area, or consult your dealer of Sony or the local authorized service facility of Sony.

For Customers in the U.S.A.

For questions regarding your product or for the Sony Service
Center nearest you,
call 1-800-222-SONY (7669).
Supplier’s Declaration of Conformity
Trade Name: SONY
Model: SEL2470GM2
Responsible Party: Sony Electronics Inc.
Address: 16535 Vi an Esprillo, San Diego, CA 92127
U.S. A.
Telephone Number: 858-942-2230
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Notes on Use

  • Do not leave the lens exposed to the sun or a bright light source. Internal malfunction of the camera body and lens, smoke, or a fire may result due to the effect of light focus ng. If ci costa nces necessitate leaving the lens in sunlight, be sure to attach the leaps. When shooting against the sun, keep the sun completely out of th e angle of view.
  • When carrying a camera with the lens attached, always firmly hold both the camera and the lens.
  • Do not hold the lens by its extended part.
  • This lens is not water-proof, although designed with dust-proofness and splash -proofness in mind. If using in the rain etc. , keep water drops away from the len
  • If the lens alone is shaken or if a camera with the lens attached is shaken while the camera is turned off, an internal component of the lens may rattle. This, however, does not indicate a malfunction. In addition, while you carry around the lens, your movement may cause the internal lens groups to shake. This, however, does not affect the performance of the lens groups.
  • Using this unit with products from other manufacturers may affect its performance, leading to accidents or malfunction.

Precautions on using a flash

  • With ce retain co combinations of lens and flash, the lens may partially block the light of the fl as h, resulting in a shadow at the bottom of the picture. In such a case, adjust the focal length or the shooting distance before shooting.

Vignetting

  • When using the lens, the corners of the screen become darker than the center. To reduce this phenomenon (ca ll ed vignetting ). close the aperture 1 to 2 stops.

A Identifying the Parts

1 Lens hood index
2 Focusing ring
3 Zooming ring
4 Focal-length scale
5 Focal-length index
6 Aperture ring
7 Aperture scale
8 Aperture index
9 Lens contacts*| 10 Lens hood
11 Polarizing-filter window
12 Focus hold button
13 Focus mode switch
14 IRIS LOCK switch
15 Mounting index
16 Lens mount rubber ring
17 Hood release button
18 Aperture click switch
9 Zoom smoothness switch
---|---

  • Do not touch the lens contacts.

B) Attaching and Detaching the Lens

  • Before attaching/detaching the lens, hold the lens by its mounting body. Do not hold it by any of its= operation controls, such as th e focusing ring.

To attach the lens (See illustration-[1].)

  1. Remove the rear lens cap and the camera body cap.

  2. Align the white index on the lens barrel with the white index on the camera (mounting index), then insert the lens into the camera mount and rotate it clockwise until it locks.
    • Do not press the lens release button on the became ra when mounting the lens.
    • Do not mount the lens at an angle.

  3. Remove the front lens cap.
    • You can attach/detach the front lens cap in two ways, (1) and (2).

To remove the lens

  1. Attach the front lens cap.
  2. While holding down the lens release button on the camera, rotate the lens counterclockwise until it stops, then detach the lens. (See illustration l;l-[gl,)

C Attaching the Lens Hood

It is recommended that you use a lens hood to reduce flare and ensure maximum image quality. Align the red line on the lens hood with the red line on the lens (lens hood index), then insert the lens hood into the lens mount and rotate it clockwise until it clicks into place and the red dot on the lens hood is aligned with the red line on the lens (1).

  • The polarizing-filter window can be opened (2) to allow the polarizing filter (sold separately) to rotate without having to remove the lens hood. While shooting without filter operations or carrying around the lens, however, keep the window closed.
  • If the lens hood is not rotated until it clicks into place, there is a possibility that a shadow appears on captured images or the lens hood falls off.
  • If the flashlight is partially blocked by the lens hood, a shadow may appear at the bottom of captured images. In such a case, remove the lens hood.
  • When storing, fit the lens hood onto the lens backward rd s (3).

To remove the lens hood
While holding down the hood release button on the lens hood, rotate the lens hood counterclockwise.

DZooming

Rotate the zooming ring to the desired focal length. About the zoom smoothness switch (See illustration D-a.)
You can set the tension for rotating the zooming ring with the zoom smoothness switch.
To decrease the tension, slide the zoom smoothness switch to “SMO OTH.” To increase the tension, slide the zoom smoothness switch to “TIGHT.”
To keep the tension for rotating the zooming ring light, it is recommended that the zoom smoothness switch be set to “SMOOTH. ”
To prevent unintended movement of the lens end while shooting at an upward/downward angle or carrying around the lens, it is recommended that the zoom smoothness switch be set to “TIGHT.”

E Focusing

  • The focus mode switch of this lens does not function with some camera models. For further information on compatibility, visit the website of Sony in your area, or co NSU lt your dealer of So ny or local authorized service facility of Sony.

To switch AF (auto focus)/ MF (manual focus)
The focus mode ca n be switched between AF and MF on the lens. For AF photography, both the camera and lens should be set to AF.
For MF photography, either or both the camera or lens should be set to MF.
To set the focus mode on the lens Slide the focus mode and switch to the appropriate mode, AF or MF (1).

  • Refer to the camera manuals to set the focus mode of the camera.
  • In MF, turn the focusing ring to adjust the focus (2) while looking through the viewfinder, etc.

To use a camera equipped with an AF/MF control button

  • By pressing the AF/MF control button during AF operation, you can temporarily switch to MF.
  • Pressing the AF/MF control button during MF operation lets you temporarily switch to AF if the lens is set to AF and the camera to MF.

F Using the Focus Hold Buttons

  • The focus hold button of this lens does not function with some camera models.
    For further information on compatibility, visit the website of Sony in your area or consult your dealer of Sony or the local authorized service facility of Sony.

Press the focus hold button in AF to cancel AF. The focus is fi xed and you ca n release the shutter on the fixed focus. Release the focus hold button while pressing the shutter button halfway to start AF again.

G Adjusting the aperture

IRIS LOCK switch

  • Lock: You can lock the aperture ring at “A” on the aperture scale, or rotate it between f/2.8 and f/22.
  • Release : You can rotate the aperture ring between “A” and f/2.8 on the aperture scale.

When you align “A” on the aperture scale to the aperture index, the camera is set to auto iris mode and the exposure is set by the camera. And you can adjust the amount of light manually between f/2.8 and f/22 by rotating the aperture ring.
Notes Set the aperture click switch to “OFF ” when shooting movies. (See illustration @-a.) When the aperture click switch is set to “OFF,” the sound of the aperture ring is reduced. (For movie recording) If you change the aperture value while shooting a movie with the aperture CLI CK switch set to “ON,” the sound of the aperture ring will be recorded.

Specifications

Product name FE 24-70mm F2 8 GM
(Model name) (SEL2470GM2)
Foca l length (mm) 24-70
3Sm m equivalent focal length*1 (mm) 36-105
Lens groups-elements 15-20
The angle of view 12 84°-34°
The angle of view 2*2 61 °-23°
Minimum focus*3 (m (feet) 0.21-0.3 (0.69-0.99)
Maximum magnification (X) 0.32
Minimum aperture f/22
Filter diameter (mm) 82
Dimen sions (maximum  diameter x height) (approx., mm (i n. )) 87.8 X 119.9

(3 1/2 X 4 3/4)
Mass (approx., g (oz))| 695 (24.6)
SteadyShot| No

  1. This is the eq Riva lens focal length in 35mm format when mounted on an Interchangeable Lens Digital Camera equipped with an APS-C sized image sensor.
  2. Ang le of view 1 is the value for 35mm cameras, and the angle of view 2 is the VAlu e for Interchangeable Lens Digital Cameras equipped with an APS-C sized image se no.
  3. Minimum focus is the distance from the image sensor to the subject.
    • Depending on the lens mechanism, the focal length may cha ng e with any change in shooting distance. The focal lengths given above assume the lens is focused at infinity.

Included items
(The number in parentheses indicates the number of pieces.)
Lens (1), Front lens cap (1), Rear lens cap (1),
Lens hood (1), Lens case (1),
Set of printed documentation
Design and specifications are subject to change without notice.
and G are trademarks of Sony Group Corporation.

LIMITED WARRANTY

U.S. and Canada only – 1 year
Camcorder, Digital Still Camera, Interchangeable Lens Digital Camera Interchangeable Lens, Accessory
Sony Electronfcs Inc. solely for purchases made the InIha United States and Sony of Canada Ltd. solely for purchases made In Canada (collectively “Sony”) warrants lhis product against defects in material or workmanship for the original owner and any subsequent end user owner(s) you” or “You I”) for the time period set forth above as set forth herein. Pursuant to this Limited Warranty, Sony will, at its option, (I) repair the product using new or refurbished parts or (Ii) replace lhe product with a new or recertified/refurbished product of the same (or similar) model. For purposes of this Limited Warranty, “recertified” or “refurbished” means a product or part that has been returned to Its original specifications. In the event of a defect, these are Your exclusive remedies. Sony does not warrant that the operation of the product will be uninterrupted or error-free.
Term: For the time period set forth above from the original date of purchase of the product when r.urchased directly from Sony or Sony authorized dealer (To determine if a dealer is in the Sony authorized dealer network, please visit US: www.sony.com/retailers; Canada: https://dealerlocator.sony.ca/locator; or contact Sony directly), Sony will, at its option, repair or replace with a new, recertified or refurbished product or part, any product or part determined to be defective.
This Limited Warranty covers only the hardware components packaged with the product. It does not cover separate accessories, technical assistance for hardware or software usage and it does not cover any software products whether or not contained in the product, and other included content; any such software or olher included content is provided “AS IS” unless expressly provided for in any enclosed software Limited Warranty or End User License Agreement. Please refer to the End User License Agreement(s) Included with the product for Your rights and obligations with respect to the software or other included content. If You purchased an extended service plan. please refer to the service plan for the coverage, duration, and terms of service. Extended service plans are not governed by this Limited Warranty.
To obtain warranty service , You must deliver a U’le product, in either its original packaging or packaging affording an equal d~ree of protection to a Sony authorized service center together with a dated purchase receipt in order to obtain warranty service. Sony cannot guarantee that ii will be able to repair any product under this warranty or make a product exchange without risk to or loss of software or data. It Is Your responsibility to remove or backup any removable media or parts, data, software or other materials You may have stored or preserved on Your product. It is likely that any media or parts, data, software, or other materials (like pictures, music, videos, etc.) will be lost or reformatted during service and Sony will not be responsible for any such damage or loss. Contact the following for specific instructions on how to obtain warranty service for Your product.
For purchases made in the UNITED STATES:
Visit Sony’s Website: www.sony.com/support
Or call the Customer Experience Center: 1-800-222-SONY (7669)
To register Your product or for contact information to purchase accessories or parts go to Sony’s Website
For purchases made in CANADA:
Visit Sony’s Website: www.sony.ca/support
Or call the Customer Experience Center: 1-877-899-SONY (7669)
To register Your product or for contact Information to purchase accessories or parts go to Sony’s Website On-site service for televisions of certain dimensions may be available to a customer living within a 50km radius of an authorized Sony service facility, provided the residence can be accessed by an on-road service vehicle.
Repair/Replacement Warranty: This Limited Warranty shall apply lo any repair, replacement part or replacement, recertified or refurbished product for lhe remainder of the original Limited Warranty period or for ninety (90) days, whichever Is longer Any parts or product replaced under this Limited Warranty will become the property of Sony. Any replacement, recertified or refurbished product provided under this Limited Warranty may, at Sony’s option, vary in color and/or cosmetic design from the original product and may not Include any original engraving or similar customization/personalization.
Sony is not responsible for, and this Limited Warranty does not cover, any damage arising from a ! allure to operate the product within its intended uses, or otherwise follow the wner’s manual and safety instructions relating lo the product’s use and installation. This Limited Warranty only covers product issues caused by defects in material or workmanship during ordinary consumer use. This Limited Warranty does not cover products purchased from sources other than Sony or a Sony authorized dealer (including non-authorized online auctions), or issues due to: (Q outdoor exposure and other acts of nature; (11) power surges; Qii) accidental damage; 9v) abuse; (v) limitations of  echnology;
(vi) cosmetic damage; (vlf) contact with liquid, heat, humidity or perspiration, sand, smoke, or foreign materials; (viii) use of parts or supplies not sold or authorized by Sony; (ix)
servicing not authorized or performed by Sony or a Sony authorized service center; (x) computer or Internet viruses, bugs, worms, or Trojan Horses; (xi) malfunct1ons due to
peripherals/accessories; (xii) modifications of or to any part of the product, including “rooting” or other modifications to control the behavior of the product or any factory installed
operating system; (xii~ consumable parts such as batteries; or (xiv) any product where the factory-applied serial number has been altered or removed from the product. Further,
10 the extent lhis product incorporates use of a display, please note that a display contains hundreds of thousands of Individual pixels, and displays typically contain a small number of pixels that do not function properly. This Limited Warranty does,,ot cover up to .01% pixel outages {small dot picture elements that are dark or Incorrectly illuminated).
This limited warranty does not cover Sony products sold “AS IS” or “WITH ALL FAULTS” or consumables (such as fuses or disposable batteries). Sony will not replace missing components from any package purchased “Open Box” or “AS IS”. This Limited Warranty is valid only in the United States and Canada (as applicable).
LIMITATION ON DAMAGES: SONY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR CONDITION ON THIS PRODUCT. NOR SHALL RECOVERY OF ANY KIND AGAINST SONY BE GREATER THAN THE ORIGINAL PURCHASE PRICE OF THE PRODUCT FROM SONY OR AN AUTHORIZED SONY DEALER.
DURATION OF IMPLIED WARRANTIES OR CONDITIONS: EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS LIMITED WARRANTY.
Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on how long an implied warranty lasts, so the above
limitations or exclusions may not apply to You. This Limited Warranty gives You specific legal rights and You may have other rights which vary from jurisdiction to jurisdiction.
For purchases made in the U.S.: Read the following Dispute Resolution/Arbitration provision carefully. It details Your rights and instructions should a dispute related to the product arise.
What Happens If We Have A Dispute: Should a dispute or claim arise related 10 the product, Your purchase and/or use of the product, the terms of this Limited Warranty, or any service provided under the terms of this Limited Warranty (Including any repair or replacement) C’Dispute”), You and Sony agree that the Dispute shall be resolved exclusively through binding arbitration. YOU UNDERSTAND AND ACKNOWLEDGE THAT BY AGREEING TO ARBITRATION, YOU ARE GIVING UP THE RIGHT TO LITIGATE (OR PARTICIPATE IN AS A PARTY OR CLASS MEMBER) IN ANY DISPUTES IN COURT. You also agree that ANY DISPUTE RESOLUTION PROCEEDING WILL ONLY CONSIDER YOUR INDIVIDUAL CLAIMS, AND BOTH PARTIES AGREE NOT TO HAVE ANY DISPUTE HEARD AS A CLASS ACTION, REPRESENTATIVE ACTION, CONSOLIDATED ACTION, OR PRIVATE ATTORNEY GENERAL ACTION. Despite the above, You have the right to litigate any Dispute on an individual basis in small claims court or another similar court of limited jurisdiction, to the extent, the amount at issue does not exceed $15,000, and as long as such court has proper jurisdiction and all other requirements (including the amount in controversy) are satisfied.
Arbitration Instructions. To begin Arbitration, either You or Sony must make a written demand to the other for arbitration. The Arbitration will take place before a single arbitrator. The arbitration will be administered in keeping with the Expedited Procedures of the Commercial Arbitration Rules and the Supplementary Proceedings for consumer-Related disputes (“Rules”) of the American Arbitration Association (“AAA”), when applicable and in effect when lhe claim is filed. You may get a copy of AAA’s Rules y contacting AAA at 800-778-7879 or visiting www.adr.org. The filing fees lo begin and carry out arbitration Will be shared between You and Sony, but in no event shall our fees ever exceed the amount allowable by the special rules for Consumers Disputes provided for by AAA. al which points Sony will cover all additional administrative fees and expenses. This does not prohibit the Arbllralor from giving the winning party their fees and expenses of the arbitration when appropriate pursuant to the Rules. Unless You and Sony agree differently, Iha arbitration will take place in the county and state where You live, and applicable federal or state law shall govern the substance of any Dispute during the arbitration. However, the Federal Arbitration Act, 9 U.S.C. § 1, et seq., will govern the arbitration itself and nol any slate law on arbitration. The Arbitrator’s decision ill be binding and final, except for a limited right of appeal under the Federal Arbitration Act.

Opt-Out Instructions. IF YOU DO NOT WISH TO BE BOUND BY THE BINDING ARBITRATION PROVISION, THEN: (1) You must notify Sonar in writing within 30 days of the date that You purchased the product; (2) Your written notification must be mailed to Sony Electronics Inc., 16535 Via Esprillo, MZ 105. San Diego CA 92127, All: Legal Department; AND (3) Your written notification must include (a) Your NAME, (b) Your ADDRESS, (c) the DATE You purchased the product, and {d) a clear  tatement that “YOU DO NOT WISH TO RESOLVE DISPUTES WITH ANY SONY ELECTRONICS ENTITY through ARBITRATION AND/OR BE BOUND BY THE CLASS ACTION WAIVER.”
Opting out of this dispute resolution procedure will not affect the coverage of the Limited Warranty in any way, and You will continue to enjoy the benefits of the Limited Warranty.

https://www.sony.net/
©2021 Sony Corporation Printed in Thailand

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals