Keter 17185442 Magic Play House Instruction Manual
- June 5, 2024
- Keter
Table of Contents
Keter 17185442 Magic Play House
INSTRUCTIONS FOR USE
IMPORTANT! PLEASE READ CAREFULLY! KEEP FOR FURTHER USE.
WARNING! The product is intended for indoor and outdoor use. For domestic use only. Cleaning: lukewarm water with the addition of detergent and a soft cloth. All product components should be mounted on a flat surface. Individual elements and screws should be installed by hand and only at the end of assembly, tighten them with tools. Accessories not included.
ASSEMBLY PARTS
INSTALLATION INSTRUCTIONS
IMPORTANT NOTICE!
- The product may be assembled, disassembled and maintained solely by an adult.
- Always check the product safety, stability and correct assembly before use.
- Never leave a child unattended. Playing children must be always supervised by an adult.
- Do not allow children to play in dangerous places and in places deemed to be inadequate to play with such toys, e.g. close to decks, roofs, stairs, etc.
- The product must be put up on levelled, non-slippery surface, at least 2 m away of any other object or obstacle, e.g. fence, garage, pipeline, electric wires, hanging branches, etc.
- Avoid open fire and other sources of extreme heat, such as grill or the like, close to the place of children’s play.
- Do not put up the toy close to slopes, steps, water bodies, streets or other hazards.
- Do not place the product on concrete, asphalt or any other hard surface.
- Outdoors the toy must be put up on a lawn or on a similar soft surface.
- For fixing, ground anchors may be used, which should be placed at or below the ground level in order to reduce the risk of the toy falling over.
- Do not use the toy in strong wind.
- The playing children and the toy must be protected against excessive sun exposure.
- After assembly completion, check whether all parts have been properly inserted in the connecting elements in accordance with the assembly instruction.
- Regularly check the correct assembly of the playhouse and tighten the screws if needed.
- Regularly control the technical condition of the parts. If any of the parts is damaged or has sharp edges, do not use the product by the time the defects have been removed or the parts have been replaced with new ones.
The toy may be dangerous if the control is neglected.
- The product is resistant to weather conditions.
- Made of durable polypropylene, recyclable.
In the case of inquiries contact the Distributor’s Customer Service Department
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>