asa ELECTRONICS VCMS14R NTSC System Owner’s Manual
- June 5, 2024
- asa ELECTRONICS
Table of Contents
asa ELECTRONICS VCMS14R NTSC System
NTSC SYSTEM VCMS14L/R
- VCMS14L/R Features:
- High Performance CMOS Sensor
- IR LED Low Light Enhancement
- Waterproof
- Compact Size
Contents:
- Camera
- Bracket
- Hardware Kit
Installation and Pin Out
Specifications
| Mounting Type | External Type |
|---|---|
| Image Sensor | 1/3″ CMOS Sensor |
| Resolution | 600TVL |
| Water Resistance | IP69K |
| View Angle | 125°(H), 111°(V), 153°(D) |
Dimension
| 58(W)27(H)33.5(D)mm
2.28(W)1.1(H)1.32(D)inch
Operation Temperature| -20℃ ~ +70℃
Weight| Approx.0.3kg/0.66
Mounting Plate Method
Instruction:
- Assemble camera onto mounting plate
- a. Remove 3M film from the mounting plate
- b. Passthrough the wire harness and position camera to mounting plate
- c. Mount the slotted washer on the back of the camera bracket according to the diagram, screw on the nut and tighten well with socket or wrench
- d. Fit the gasket on the back of the camera assembly
- Pass CEC connector through 0.75” diameter hole in the vehicle body
- Attach the camera assembly to the vehicle body using the included self tapping screws
Direct Mount Method
Instruction:
- Mount the slotted washer & screw the nut after the camera attached to vehicle body
- Caulk around the perimeter of the camera after the camera attached to the vehicle body.
Camera to bracket hardware
Mounting Plate Hole Dimensions
UNIT: Inch
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>