KENWOOD TYPE KVC85 Titanium Chef Baker Instructions

: June 5, 2024
: KENWOOD

KENWOOD TYPE KVC85 Titanium Chef Baker Instructions

Know Your Kenwood Stand Mixer

Congratulations on buying a Kenwood. With such a wide range of attachments available, it is more than just a mixer. It is a state-of-the-art Stand Mixer. We hope you will enjoy it.
Robust. Reliable. Versatile. Kenwood.

Safety

Read these instructions carefully and retain for future
Remove all packaging and any
If the plug or cord is damaged it must, for safety reasons, be replaced by Kenwood or an authorised Kenwood repairer in order to avoid a
Turn the speed control to ‘O’ OFF position and unplug before fitting or removing tools/ attachments, after use and before
Keep body parts, hair and jewellery and loose clothing away from moving parts and fitted
Never leave the Stand Mixer unattended when it is
Never use a damaged Get it checked or repaired: see ‘Service and Customer Care’ section.
Never operate the Stand Mixer with the head in the raised
Never put your fingers into the hinge
Never let the cord hang down where a child could grab
Never let the power unit, cord or plug get
Never use an unauthorised attachment or more than one attachment at
Never exceed the quantities stated in the maximum capacity chart
When using an attachment, read and follow the safety instructions that are supplied with
Take care when lifting this appliance as it is heavy. Ensure the head is correctly latched in the down position and that the bowl, tools, outlet covers and cord are secure before
Take care when removing bowl tools after extended use as they may get
Children should be supervised to ensure that they do not play with the
Do not move or raise the mixer head with an attachment fitted as the Stand Mixer could become
When moving the appliance always pick up by the pedestal base and mixer Do not lift or carry the appliance by the bowl handle.
Do not operate your appliance near the edge or overhanging the work surface or apply force to an attachment when fitted, as this may cause the unit to become unstable and tip over, which may resultin
The short power-supply cord is used to reduce risk resulting from becoming entangled in or tripping. Extension cords may be used if care is exercised in their If an extension cord is used: 1) The marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance; and 2) The cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally. 3) The extension cord should be an earthed-type 3-wire cord. The electrical rating of the appliance is listed on the bottom of the unit.
Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards
Misuse of your appliance can result in
This appliance shall not be used by children. Keep the appliance and its cord out of reach of
The maximum rating is based on the mini chopper/ mill attachment that draws the greatest Other attachments may draw less power.

KVC85 only

Never use the splashguard with the 3.5L bowl. Splashguard only suitable for use with the 5L bowl
Do not fit a bowl tool to the stand mixer when the 5L bowl is stacked in the 5L bowl.
For kneading bread dough use the 5L bowl

KVL85 only

Never use the splashguard with the 5L bowl. Splashguard only suitable for use with the 7L bowl
Do not fit a bowl tool to the stand mixer when the 5L bowl is stacked in the 7L
For kneading bread dough use the 7L bowl
Only use the appliance for its intended domestic Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions.

Before plugging in

Make sure your electricity supply is the same as the one shown on the underside of your appliance.

Important – Plug and Fuse Information

The wires in the cord are coloured as follows: Green and Yellow = Earth Blue = Neutral Brown = Live
If the plug supplied with your appliance has a fuse fitted it is rated either 10A or 13A. If the fuse fails it must be replaced with one of the same rating.
If the plug or cord requires replacing a new cord set should be fitted by an Authorised Kenwood Repairer.
WARNING: THIS APPLIANCE MUST BE EARTHED.

Note:

For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the fuse cover is lost then the plug must not be used until a replacement can be obtained. The correct fuse cover is identified by colour and a replacement may be obtained from your Kenwood Authorised Repairer (see Service).
If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY. An electric shock hazard may arise if an unwanted non-rewireable plug is inadvertently inserted into a 13A socket outlet.
This appliance conforms to EC Regulation 1935/2004 on materials and articles intended to come into contact with food. Before Using For The First Time
Wash the parts: see ‘Care and Cleaning’ section. Key

Attachment Outlets

High-speed outlet Slow-speed outlet Bowl tool socket

Mixer

High speed outlet cover Mixer head
Mixer ready indicator light Speed control dial
Head release lever Power unit Easyweigh scales

display screen
On/Zero button c kg/lb button Bowls

Slow speed outlet cover Head Cover K-beater Whisk Dough tool
Creaming beater Spatula Splashguard
Note: Spanner shown is for illustration purposes only and is not supplied in pack.

Optional Attachments

There are a range of optional attachments available to use with your Stand Mixer. See the attachment leaflet included in your pack or visitwww.kenwoodworld.com to see the full range and how to buy an a
ttachment not included in your pack.
Note: Slow Speed Outlet Attachments The slow speed outlet on your Stand Mixer model features the Twist Connection System. It is designed
to accept Twist Connection System attachments.
When purchasing new attachments for the slow speed outlet you should check compatibility with your Stand Mixer. All Twist Connection System attachments can be identified by the product code which starts with KAX and also by the Twist logo which is visible on
packaging. For more information visit www.kenwoodworld.com/twist.

If you own attachments featuring the Bar Connection System you will need to use the KAT002ME adaptor to connect these to the Twist Connection
System on your Stand Mixer.
For more information visit

www.kenwoodworld.com/twist.

To Use Your Stand Mixer

Refer to Illustrations A – I

Push the head-lift lever down and raise the mixer head until it
Fit the bowl, turn clockwise to
Place the required tool into the Then push up and turn the tool to lock into position.

Note: If the K-beater or Whisk are not picking up ingredients from the bottom of the bowl refer to the “Tool Adjustment” section.

Lower the mixer head by pushing the head release lever down and lower the mixer head until it
Plug into the power supply. Start the machine by turning the speed control to the desired speed Use the pulse (P) position for short bursts of maximum speed.
After use, return the speed control to ‘O’ OFF position and unplug your Stand
Release the tool by turning clockwise to unlock from the tool socket and then remove.

Hints

The fold function can be used for folding light ingredients into heavier mixtures for example meringues, mousses, fruit fools, Genoese sponges and soufflés, and to slowly incorporate flour and fruit into cake mixtures. The mixer will operate at a constant slow speed.

Important

Ensure that no bowl tools are fitted or stored in the bowl when using other outlets.

To Use The Weighing Function

Refer to Illustrations J – L

Fit the
Press the on/zero button, the display screen will flash followed by
Press the (kg/lb) button to select either grams or The display will default to kg/g when first switched on.
The unit weighs in 1g increments and teaspoon/tablespoon measures are recommended for weighing small
To zero press the on/zero button
Weigh the required ingredients straight into the

Note: Always place the appliance on a dry, flat, stable surface prior to weighing. Do not apply pressure to the mixer or bowl whilst weighing as this will affect the accuracy of the scales. The weighing function can be used with the mixer head in either the down or up position. Count up timer

During operation the display screen will automatically operate as a count up timer.
The timer will count up to 30 minutes and will pause (for up to 30 secs) when ever the speed control is turned to the ‘O’ position.
To reset the timer to zero when the machine is running press the ON/ ZERO button.

Eggs sizes used = medium sized (Weight 53 – 63g).
Lower max capacity when using 5L bowl on KVL85 machine. This is due to using smaller capacity bowl with the Chef XL size bowl tools.