greenlite G-Pure-22W Air Purifier User Manual
- June 5, 2024
- greenlite
Table of Contents
G-Pure-22W Air Purifier
User Manual
READ AND SAVE THESE INSTRUCTIONS INSTRUCTION MANUAL AND WARRANTY INFORMATION
IMPORTANT SAFETY INSTRUCTIONS:
IN ORDER TO AVOID ANY DAMAGE TO YOU, OTHERS, OR PROPERTY, PLEASE FOLLOW THE
FOLLOWING SAFETY PRECAUTIONS:
If the power cord or unit does not work, contact Greenlite customer service
immediately.
READ ALL INSTRUCTIONS BEFORE USING.
WARNING – TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC SHOCK, OR INJURY TO
PERSONS:
- Unplug or disconnect the air purifier from the power supply if the plug is not working.
- This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
- DO NOT touch the power plug with wet hands. – Turn off the power before cleaning the unit.
- DO NOT take apart or modify the unit without authorization.
- BEFORE USING THIS PRODUCT, PLEASE MAKE SURE TO REMOVE THE PLASTIC COVERING FROM THE FILTER.
- Indoor and household use only.
- DO NOT place other items on top of the appliance. Sitting or standing on this appliance is forbidden.
- DO NOT insert the fingers or objects into the air inlets or air outlets to prevent the product from physical damage or malfunction.
- This appliance cannot replace natural ventilation and other appliances like a vacuum cleaner, kitchen ventilators, etc.
- When the appliance is working, it must be placed on a dry, flat, and stable floor, with at least 50cm space reserved around it.
- DO NOT put it in a place with direct sunlight.
- To prevent electromagnetic disturbance, the appliance must keep a certain distance from the TV, radio, microwave oven, and others.
- WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
This product employs overload protection (fuse). A blown fuse indicates an
overload or short-circuits situation. If the fuse blows, unplug the product
from the outlet. Replace the fuse as per the user servicing instructions
(follow product marking for proper fuse rating) and check the product. If the
replacement fuse blows, a short-circuit may be present and the product should
be discarded or returned to an authorized service facility for examination
and/or repair. Do not run cord under carpeting. Do not cover the cord with
throw rugs, runners, or similar coverings. Do not route the cord under
furniture or appliances. Arrange cord away from traffic area and where it will
not be tripped over.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent, or similarly qualified persons in order to avoid any type of
hazard. Children shall not play with the appliance. Cleaning and maintenance
of the unit shall not be made by children without supervision. Prior to
cleaning or doing any type of maintenance, the appliance must be disconnected
from the supply.
SAVE THESE IMPORTANT INSTRUCTIONS FOR EASY REFERENCE.
TECHNICAL DATA
- Voltage: 120V AC 60Hz
- Power Rating: 22W -Noise level: 22-55 dB(A)
- Room size: up to 225 sq. ft.
- Unit dimensions: 9.45″W x 9.45″D xl 5.04″H
- Unit weight: 6.17 lbs.
PRODUCT INFORMATION
| No. | Description |
|---|---|
| 1 | Display Screen |
| 2 | Air Outlet Grill |
| 3 | Back Cover Plate |
| 4 | Adapter Cable |
| 5 | HEPA Filter |
| 6 | Base Plate |
INSTALLATION STEPS
-
Place the unit in a dry location and on a flat surface. To ensure enough ventilation, make sure that there is a 20″ (50 cm) distance between the unit and the wall or nearby furniture. This will promote enough ventilation and high efficiency.
-
Rotate the base counter-clockwise.
-
Take out the preinstalled HEPA filter.
-
Remove the plastic covering from the filter.
-
Install the new HEPA filter back in the unit.
-
Reattach the base at the bottom of the unit (with the filter inside). Rotate the base clockwise to secure it.
-
Insert the adapter cable into the air purifier.
-
Insert the plug into a power source. ATTENTION
Remove all plastic packaging from the filter before installing it. DO NOT run the air purifier if there is no filter installed. Please be careful when installing the back cover. Watch your hands. -
Insert the plug into a power source. Unit lights will flash for 1 second. Unit lights will turn off and the air purifier will be in standby mode.
-
Press the On / Standby Button
-
The air quality sensor will be in the warm-up stage and the air quality indicator will flash for 3 seconds.
-
The air purifier will enter into Auto Mode when it is powered for the first time.
CONTROL PANEL
CLEANING AND MAINTENANCE
Disconnect the power plug before cleaning the unit. Do not put the unit in water or in any other liquid. Do not use abrasive, corrosive, or flammable products to clean any parts of the unit. Filters cannot be washed.
CLEANING THE AIR PURIFIER
Cleaning the housing and inlet of the air purifier
Use a soft and dry cloth to remove the dust from the air purifier.
Cleaning the inside of the air purifier
Turn off
the power, rotate the base counter-clockwise, and take out the HEPA filter.
Use a soft and dry cloth to clean the inside of the air purifier
Cleaning the outlet of the air purifier
Use a
soft and dry cloth to clean the outlet of the air purifier.
CLEANING THE FILTER
| 
---|---
1. Turn off the power and take out the HEPA filter.| 2. Reattach the base at
the bottom of the unit with the filter inside. Rotate the base counter-
clockwise to secure it.
|
3. Use a soft and dry cloth to clean the filter.| 4. Insert the plug into a
power source.
FILTER REPLACEMENT
LIGHT INDICATOR TO REPLACE THE FILTER
The unit will remind the user when the filter is due to be replaced. Filters
should be replaced every 3-6 months depending on usage. The filter change
indicator light will let you know when you have reached that time.
The filter change indicator light will alert the user when the filter is due
to be replaced. Remove the old filter and replace it with only a Greenlite G
-Pure-22W HEPA filter. Press and hold the filter change button for 3 seconds
to reset the HEPA filter.
User Servicing Instructions
1.1. Remove the plug from the receptacle or other outlet device. Do not unplug
by pulling on the cord.
1.2. Open fuse cover.
Slide open fuse access cover on top of attachment plug towards blades. (Fig;
- 1.3. Remove fuse carefully.
Insert the tip of your tool into the fuse slot (close with the terminal), then loosen the fuse gradually and slowly, but not overexert. If you feel tight, you can try it several times and loosen the fuse little by little. Once the fuse is loose, then you can get the fuse out entirely. (Fig 2.)
1.4. Risk of fire.
Replace fuse only with 2.5 Amp, 125 Volt fuse. (Fig., 3)
1.6 Risk of fire.
Do not replace the attachment plug. Contains a safety device (fuse) that should not be removed. Discard the product if the attachment plug is damaged.
WARRANTY:
This product is warranted to be free from defects in workmanship and material
for 1 year. If it fails to do so. GreenliteTM will, at its election, provide a
replacement or equivalent upon receipt of the register receipt and proof of
purchase. Please visit www.greenliteusa.com to
find out how to initiate a warranty claim. This limited warranty does not
cover bulbs subject to accident, or neglect. abuse, misuse, or acts of God.
Replacement or refund is your sole remedy.
For all inquiries, please contact our customer service team at:
info@greenliteusa.com or
1-844-695-9090 from 9:00 AM to 5:00 PM
EST.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>