EXCLUSIVE HOME ER1028-05 Double Curtain Rod Kit in Gold Installation Guide
- June 4, 2024
- EXCLUSIVE HOME
Table of Contents
Curtain Rod Installation
Hardware included
HOME ER1028-05 Double Curtain Rod Kit in Gold
You will need
| | 
---|---|---
Unscrew back plate from a rod with a screwdriver. Using back plates as a
guide, locate the desired positions. Create markings on the wall for the
mounting screws.| Set aside back plates. Drill holes into wall were marked
with 1/4 in. drill bit.| Insert wall anchors. Wall anchors are not necessary
if screwing into the wooden batten. Attach back plate to the wall using screws
provided.
| |
A. Connect the six-piece rod together. The rod with the largest diameter is
the middle piece. B. Slide assembled rod into the back plates.| Place a
support bracket in the center. Create markings on the wall for the mounting
screws. Take down the assembled rod from the back plates.| Drill holes into
the wall were marked with a 1/4 in the drill bit. Insert wall anchors. Wall
anchors are not necessary if screwing into the wooden batten. Attach the
bracket to the wall using the screws provided.
| |
Remove right rods from middle rods. Slip the curtain panels onto the left
rods. Slip the curtain panels onto the right rod and slide the right rods back
into the middle rods. Place rods with curtains into the back plates and center
support.| Tighten the screws on the back plates and center bracket to secure
the rod.| Wrap and adjust panels around both ends of the rod so the panels
hang flush with the wall.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>