SEALEY MK74 Alloy Wheel Repair Painting Stand 4 Wheel Capacity Instruction Manual
- June 5, 2024
- SEALEY
Table of Contents
ALLOY WHEEL REPAIR/PAINTING STAND
4 WHEEL CAPACITY
MODEL NO: MK74
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT IS CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS
INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
SAFETY
Only use on firm, level, unobstructed surfaces which are capable of supporting
the stand and wheels.
DO NOT overload.
Always load evenly with the center of gravity of the load as near the center
as possible.
Apply the brakes before commencing work.
DO NOT stand/ride on the stand, or allow others to do so.
Replace or repair damaged parts. Use only recommended parts. Unauthorized
parts may be dangerous and will invalidate the warranty.
◻ WARNING! Failure to comply with these instructions may result in loss of
load, damage to the rack or other property, and/or personal injury.
◻ WARNING! The warnings, cautions and instructions discussed in this
instruction manual cannot cover all possible conditions and situations that
may occur. It must be understood that common sense and caution are factors
that cannot be built into this product but must be applied by the operator.
INTRODUCTION
Will take four alloy wheels and enable the user to rotate the wheels on cones so the wheels can be repaired or painted without the need to lift and reposition them. Both supporting bars and cones have adjustable heights in order to have the most comfortable position for the user. Fitted with four castors, two with brakes for maximum maneuverability and safe positioning.
SPECIFICATION
Model No……………. ……………………MK74
Overall Length …………………………830mm
Max. Capacity……………………………100kg
ASSEMBLY
Assemble panel stands according to the parts diagram attached.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories, and packaging should be sorted, taken to a recycling center, and
disposed of in a manner that is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
Note: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications and component parts without
prior notice. Important: No Liability is accepted for incorrect use of this
product.
Warranty: Guarantee is 12 months from purchase date, proof of which is
required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk.
IP32 7AR
01284 757500
01284 703534
sales@sealey.co.uk
www.sealey.co.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>