BYBLIGHT BB-SF0197DT Ceramic Table Lamp Set Instruction Manual
- June 5, 2024
- BYBLIGHT
Table of Contents
Assembly Instructions
CHANDELIER SKU# TH-SF0197
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
SAFETY PRECAUTIONS:
- TURN OFF ELECTRICAL POWER BEFORE STARTING THE INSTALLATION OF THE LIGHT FIXTURE.
- WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
- THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
- TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH. NEVER SPRAY CLEANER DIRECTLY ONTO THE FIXTURE.
NOTE: The product may not look exactly as shown in the figures.
CAUTION: Inspect the wire insulation for any cuts, abrasions, or exposed
copper that may have resulted during shipping. If there is a defect in the
wire, do not attempt installation.
This fixture has been rated for up to 60-watt maximum TYPE A bulbs or 13-watt
compact fluorescent light bulbs or 9-watt LED bulbs.
To avoid the risk of fire, do not exceed the recommended wattage.
This product is safety listed for dry locations.
This product may be dimmed with a standard incandescent dimmer.
Assembly Steps:
|
---|---
Part Included
Code| Part description| QTY
A| Jncti n Box| 0
C| Single Mounting Bracket| 1
E| Canopy Screws| 2
F| Canopy| 1
G| Chain| 1
H| Loop| 1
J| Crystal Bar short| 12.
K| Aluminum needle| 13
L| Fixfure| 1
M| Crystal Bar short| 1
N| Socket| 5
0| Glass| 5
P| Socket Ring| 5
Q| Leading Wires| 0
Hardware included
B| Wire Nuts| 4
D| Bolts| 3
Trouble Shooting
Problem | Possible Cause | Solution |
---|---|---|
The bulb will not light. | The power is OFF. | Ensure the power supply is ON. |
There is a faulty wire connection. | Check the wiring. | |
The circuit breaker is OFF. | Ensure the circuit breaker is in the ON position. | |
The fuse blows or the circuit breaker trips when the light is turned ON. | ||
There are crossed wires or the power wire is grounding out. | Check the wire |
connections. Contact a qualified electrician.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>