xm GT1 Pro Haylou TWS Bluetooth Earbuds User Manual

GT1 Pro Haylou TWS Bluetooth Earbuds
User Manual TWS Earphones
Haylou GT1 Pro

Overview

What’s in the Box

EartipsX 3 pairs, Bluetooth earphones, charging case, charging cable, manual.

Basic Parameters

Battery capacity: 43mAh(single earbud)
Charging time: approx.1.5hr
Calling time: approx. 3.5hr
Standby time: approx.150hr
Input parameter: 5V =lO0mA
Battery type: Ii-ion
Bluetooth version: 5.0

Charging Case

Input parameter: 5V =500mA
Output parameter. 5V=l50mA
Charging time: approx. 3.5hr
Standby time: approx. 4 months
Battery capacity: B00mAh
Battery type: Ii-ion

How to wear

When calling, adjust Mic towards the mouth to gain better talking experience.

How to Charge

Prior to using, please peel off the sticker from the pogo pins and top up the earphones.

Power-on

Take out earphones from the case to power them. Or touch both panels for l.Ss to power on earphones ( LED glows solid white) when they are not in the case.

Power-off

Put earphones into the case to power off them. Or touch both panels for 4.Ss to power off earphones ( LED glows solid red for 2s ).

Stereo Mode

Auto pairing: take out both earbuds from the case On the cellphone, search for Haylou-GTl Pro and tap to connect.
If you fail to build a connection, please pull the earbuds back into the case and repeat the above steps.
Once connected, earbuds will auto-reconnect to the last device in connectivity records whenever powering on ( Bluetooth faculty needs to be turned on).

Manual pairing: manually power on two earbuds and they will auto pair with each other when LED blinks white promptly. Then LED on the right earbud will blink white slowly and now you can tap it on your cellphone to connect

Mono Mode

Auto pairing: take out one earbud from the case to power on. Its LED will soon blink slowly then search for Haylou-GTl Pro on a cellphone and tap to connect.

Manual pairing: manually power on one earbud. Its LED will soon blink white slowly then search for Haylou-GTl Pro_R/L on a cellphone and tap to connect.

Functions

LED on Charging Case

Four LEDs will blink3 times to display a practical battery level whenever you open/close the lid. Then LEDs for battery level will glow solid for 10s.
Low battery warning(carry case): If the battery level is under25%, LED will blink white three times then turn off and re-blink three times. The process will repeat in 1 minute.

Battery level display

Four LEDs will blink3timeswith the draw marquee effect and then glow solid to display practical battery level when charging.

Battery level display in charging

Caveats

1. Never disassemble or modify your headset for any reason to avoid any damage and danger.
2. Do not store the headset in extreme temperatures (under 0°C or over 45°C).
3. Avoid using the indicator close to the eyes of children or animals.
4. Do not use this headset during a thunderstorm to avoid irregular function and increased risk of electric shock.
5. Do not use harsh chemicals or strong detergents to clean the headset.
6. Keep the headset dry.

Factory Setting

If earphones do not function well, please refer to the following steps to reset the factory: take earbuds out from the case. Power off the earphones then touch both panels for about 15s (LED will blink red and white three times twice). After that, put them back in the case. Delete connectivity record on the cellphone before processing another pairing (All connectivity records relating to the earbuds will all be removed).

Audio only outputs from the single earbud

It’s really rare. Please reset GTl Pro, remove the connectivity record on your cellphone, and re-connect the earphones to your cellphone.

Other cases in charging

LED glows solid white for 1 minute when earbuds
are topped up. The carry case cannot charge earbuds if its battery drains.
LEDs on the carrying case will turn off once the case is topped up. If you charge it once again, LEDs will not give any notice, which does not mean the case is not charged.

Daily maintenance

Please do not shower with earbuds. Do not wear them on a rainy day. Do not leave them in the washing machines or in other extreme situations. Clean them with a dry cloth after use in pursuing a longer service life.

Warranty Card

Warranty Period
12 months after the next day receiving this item.

Free exchange service will not be accessed under the following circumstances:

1. Damages caused unauthorized disassembly.
2. Defects or physical damages caused by leaking or dropping off.
3. Damages by an act of God. Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing.

Hazardous substances and their contents in the item.

Notes: Please arrange using time property as your hearing may be damaged by using the device for a long time.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable pro1Edion against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by taming the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Tips

1. Before using the headset, please read the manual carefully and keep it for future reference.
2. The headset needs to be fully charged prior to first-time use.
3. If the headset is left unused for over two weeks, please recharge it periodically.
4. Please use the chargers made by a qualified manufacturer.
5. If the headset cannot be found by your phone, please check whether it is in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re-enter the mode; if a procedure error of your phone occurs, reboot i~ if a procedure error of the headset occurs, reboot or reset it.

Address: Suite 1303, 1305, and 1306, 13/F, Project Phrase 2 of GaoshengTech Tower, GaoshengTech Park, No.5 Longxi Road, Zhouxi Community, Nancheng
District, Dongguan City, Guangdong. China.
Manufacturer. Dongguan Liesheng Electronic Co., Ltd.

Web:www.haylou.com
Made In China

Documents / Resources

| xm GT1 Pro Haylou TWS Bluetooth Earbuds [pdf] User Manual
GT1 Pro Haylou TWS Bluetooth Earbuds, Pro Haylou TWS Bluetooth Earbuds, Haylou TWS Bluetooth Earbuds, TWS Bluetooth Earbuds, Bluetooth Earbuds
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>