BULLFIX Universal Kitchen Cabinet Mounting Kit Instructions

: June 13, 2024
: BULLFIX

Table of Contents

BULLFIX Universal Kitchen Cabinet Mounting Kit
Product Information
Product Usage Instructions
TV Mounting Brackets
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BULLFIX Universal Kitchen Cabinet Mounting Kit

Product Information

The Bullfix Universal Plasterboard Fixings are designed to securely attach standard (12.5mm to 16mm) thickness plasterboard to stud walls, dot & dab, and insulation backed plasterboard. These fixings are suitable for various applications and provide reliable support for mounting items such as shelves or TVs with fixed or tilting brackets.

Key Features:

Compatible with plasterboard thickness of 12.5mm to 16mm
Minimum cavity depth requirement of 7mm
Maximum recommended loads depend on plasterboard thickness, humidity, and brand
Constructed with Glass Filled Nylon material for durability

Product Usage Instructions

Step 1: Measure and mark the desired location for the fixing, ensuring a minimum cavity depth of 7mm.
Step 2: Drill a hole using a suitable drill bit, applying gentle pressure to avoid damaging the rear of the plasterboard.
Step 3: Insert the Bullfix Universal Fixing into the drilled hole, ensuring the fin tails are positioned properly to open in the cavity.
Step 4: If the plasterboard is more than 12.5mm thick, the fixing may slide into the collar. Tap the fixing slightly harder for thicker plasterboards.
Step 5: Use compatible screws (5mm or No 10 thread) to secure the item onto the Bullfix Universal Fixing. Avoid using screws that travel more than 20mm past the front surface unless the cavity depth is known to be deeper.

Note: For TV mounting applications, do not use Bullfix plasterboard fixings with cantilever or extendable arms. These fixings are only recommended for use with flat or tilting TV wall brackets. Ensure to follow the specifications provided by the TV bracket manufacturer.

For detailed load strength information based on plasterboard thickness, humidity, and brand, please refer to the datasheet available on the Bullfix website.

STEP 1

We recommend using a cable finder to
detect any existing cables behind the
plasterboard
Mark out the hole centre with a pencil or
marking tool
Using a 20mm diameter spade bit, drill a
hole

IMPORTANT: Only apply a gentle pressure whilst drilling to avoid damaging the rear of the plasterboard.
Bullfix Universal fixings are designed to be used with standard (12.5mm to 16mm) thickness plasterboard attached to stud walls, dot & dab and insulation backed plasterboard. To operate properly they require a minimum cavity depth of 7mm (with shallower cavities the fin tails will not be able to open properly).

STEP 2

Insert the collar and gently tap with a mallet

STEP 3

Push the closed fixing gently through the collar with the fin tails aligned vertically
Pinch the projected fin tails together

STEP 4

Tap the rear of the fixing until the two halves of the fixing hole align to accept a screw.

IMPORTANT: If the plasterboard is more than 12.5mm thick the fixing may slide into the collar, this is normal. You may also need to tap a little harder the thicker the plasterboard

STEP 5

Attach the object to the wall using the screws provided or any standard 5mm (No 10) screws
To maximise performance, the screw should be long enough to reach the back of the fixing. If not, a longer screw should be used.
To achieve the very maximum load capacityin plasterboard which is more than 12.5mm thick, we recommend using washers to fill the gap between the front faces of the fixing and the plasterboard.

IMPORTANT: We do not recommend using screws that travel more than 20mm past the front surface unless you know the cavity is deeper

SCAN HERE FOR AN INSTRUCTIONAL VIDEO:

Maximum load strengths are dependent on plasterboard thickness, humidity and brand. Please refer to the datasheet on www.bullfix.co.uk for more information

WE DO NOT RECOMMEND USING BULLFIX FOR TV MOUNTS WITH A CANTILEVER OR EXTENDABLE ARM AS WE CANNOT GUARANTEE THE RELIABILITY. IDEAL FOR USE WITH A FIXED OR TILTING TV BRACKETS.

| Bullfix Extra Fixing

| Bullfix Universal Fixing

---|---|---
Maximum recommended Tension Load

(15mm Plasterboard)

| 60 Kg| 49 Kg
Maximum recommended Tension Load

(12.5mm Plasterboard)

| 46 Kg| 37 Kg
Maximum recommended Shear Load

(15mm Plasterboard)

| 133 Kg| 116 Kg
Maximum recommended Shear Load

(12.5mm Plasterboard)

| 98 Kg| 103 Kg
Maximum recommended Cantilever Load @ 150mm

(15mm Plasterboard)

| 45 Kg| 34 Kg
Maximum recommended Cantilever Load @ 150mm

(12.5mm Plasterboard)

Maximum recommended loads apply to plasterboard (British Gypsum Gyproc Wallboard) in a dry condition. Please note that variations in board mounting, moisture content, plasterboard brand or physical condition of board can adversely effect load bearing performance. Continuous and repetitive loading / unloading on the fixing will weaken plasterboard.
All recommended loads assume a minimum distance from the edge of the board of 50mm
When using multiple fixings, to maintain the best performance for the fixing we would recommend you keep a minimum center distance of 90mm between fixings.
For all maximum recommended loads required safety factors are considered.
Fixing Material – Glass Filled Nylon.

TV Mounting Brackets

We do not recommend using Bullfix plasterboard fixings with TV mounting extendable arms. Any bracket that extends the center of gravity of any loading further than 150mm from the wall will risk exceeding the capability of the plasterboard fixing and in fact the plasterboard itself. We only recommend Bullfix plasterboard fixings for use with flat or tilting TV wall brackets . BULLFIX-Universal-Kitchen-Cabinet-Mounting-Kit-fig-10

Radiator or Shelf Brackets:
We only recommend mounting items on plasterboard with Bullfix fixings using an appropriate bracket. The bracket should adhere to the specification shown below.
”Y” must be at least 1.5 times bigger than “X” BULLFIX-Universal-Kitchen-
Cabinet-Mounting-Kit-fig-11