JBL QUANTUM 810 Wireless Headphones Owner’s Manual

: June 9, 2024
: JBL

Table of Contents

QUANTUM 810 Wireless Headphones
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

QUANTUM 810 Wireless Headphones

810WIRELESS
OWNER’S MANUAL

TABLE OF CONTENTS
INTRODUCTION …………………………………………………………………………………………….. 1 WHAT’S IN THE BOX……………………………………………………………………………………….. 2 PRODUCT OVERVIEW ……………………………………………………………………………………. 3
Controls on headset …………………………………………………………………………………………………………………….3 Controls on 2.4G USB wireless dongle………………………………………………………………………………….5 Controls on 3.5mm audio cable………………………………………………………………………………………………5 GETTING STARTED…………………………………………………………………………………………. 6 Charging your headset ……………………………………………………………………………………………………………….6 Wearing your headset …………………………………………………………………………………………………………………7 Power on…………………………………………………………………………………………………………………………………………..8 First-time setup (for PC only)…………………………………………………………………………………………………….8 USING YOUR HEADSET ………………………………………………………………………………… 10 With 3.5mm audio connection……………………………………………………………………………………………..10 With 2.4G wireless connection …………………………………………………………………………………………….11 With Bluetooth (secondary connection)…………………………………………………………………………..13 PRODUCT SPECIFICATIONS…………………………………………………………………………. 15 TROUBLESHOOTING ……………………………………………………………………………………. 16 LICENSE………………………………………………………………………………………………………… 18

Introduction
Congratulations on your purchase! This manual includes information on the JBL QUANTUM810 WIRELESS gaming headset. We encourage you to take a few minutes to read this manual, which describes the product and includes step-by-step instructions to help you to set up and get started. Read and understand all the safety instructions before using your product. If you have any questions about this product or its operation, please contact your retailer or customer service, or visit us at www.JBLQuantum.com
– 1 –

What’s in the box

06

01

02

03

04

05

01 JBL QUANTUM810 WIRELESS headset 02 USB charging cable (USB-A to USB-C) 03 3.5mm audio cable 04 2.4G USB wireless dongle 05 QSG, warranty card and safety sheet 06 Windshield foam for boom microphone

– 2 –

PRODUCT OVERVIEW
Controls on headset
01 02 03
16 04 05 06
15 07
14 08
13 09
12 10 11
01 ANC* / TalkThru** LED · Lights up when the ANC feature is enabled. · Flashes quickly when the TalkThru feature is enabled.
02 button · Press briefly to turn ANC on or off. · Hold for more than 2 seconds to turn TalkThru on or off.
03 / dial · Balances the chat volume in relation to the game audio volume.
04 Volume +/- dial · Adjusts headset volume.
05 Detachable windshield foam
– 3 –

06 Mic mute / unmute LED · Lights up when the microphone is muted.
07 button · Press to mute or unmute the microphone. · Hold for more than 5 seconds to turn the RGB light on or off.
08 Charging LED · Indicates the charging and battery status.
09 3.5mm audio jack 10 USB-C port 11 Voice focus boom microphone
· Flip up to mute, or flip down to unmute the microphone. 12 button
· Hold for more than 2 seconds to enter Bluetooth pairing mode. 13 slider
· Slide upwards / downwards to power on / off the headset. · Slide upwards and hold for more than 5 seconds to enter 2.4G pairing mode. 14 Status LED (Power / 2.4G / Bluetooth) 15 RGB Lighting Zones 16 Flat-fold ear cup

ANC (Active Noise Cancelling): Experience total immersion while gaming by suppressing the outside noise. ** TalkThru: In TalkThru mode, you can hold natural conversations without removing your headset.
– 4 –

Controls on 2.4G USB wireless dongle
02 01
01 CONNECT button · Hold for more than 5 seconds to enter 2.4G wireless pairing mode.
02 LED · Indicates the status of 2.4G wireless connection.
Controls on 3.5mm audio cable
01 02
01 slider · Slide to mute or unmute the microphone in 3.5mm audio connection.
02 Volume dial · Adjusts headset volume in 3.5mm audio connection.
– 5 –

Getting started
Charging your headset
3.5hr
Before use, fully charge your headset through the supplied USB-A to USB-C charging cable.
TIPS:
· It takes approximately 3.5 hours to fully charge the headset. · You can also charge your headset through a USB-C to USB-C charging cable
(not supplied).
– 6 –

Wearing your headset
1. Put the side marked L onto your left ear and the side marked R onto your right ear. 2. Adjust the earpads and headband for a comfortable fit. 3. Adjust the microphone as necessary.
– 7 –

Power on

· Slide the power switch upwards to power on the headset. · Slide downwards to power off.
The status LED glows solid white upon powering on.

First-time setup (for PC only)

Download

from jblquantum.com/engine to gain full access

to features on your JBL Quantum headset – from headset calibration to adjusting

3D audio to suit your hearing, from creating customized RGB lighting effects to

determining how the boom microphone side-tone works.

Software requirements
Platform: Windows 10 (64 bit only) / Windows 11
500MB of free hard drive space for installation
TIP:
· QuantumSURROUND and DTS Headphone:X V2.0 available on Windows only. Software installation required.

– 8 –

1. Connect the headset to your PC via 2.4G USB wireless connection (See “With 2.4G wireless connection”).
2. Go to “Sound Settings” -> “Sound Control Panel”.
3. Under “Playback” highlight “JBL QUANTUM810 WIRELESS GAME” and select “Set Default” -> “Default Device”.
4. Highlight “JBL QUANTUM810 WIRELESS CHAT” and select “Set Default” -> “Default Communication Device”.
5. Under “Recording” highlight “JBL QUANTUM810 WIRELESS CHAT” and select “Set Default” -> “Default Device”.
6. In your chat application select “JBL QUANTUM810 WIRELESS CHAT” as the default audio device.
7. Follow the onscreen instructions to personalize your sound settings.

JBL Quantum810 WIRELESS Game

JBL Quantum810 WIRELESS Chat

– 9 –

Using your headset
With 3.5mm audio connection

1. Connect the black connector to your headset.
2. Connect the orange connector to the 3.5mm headphone jack on your PC, Mac, mobile or gaming console device.

Basic operation

Controls

Operation

Volume dial on 3.5mm audio cable Adjust master volume.

slider on 3.5mm audio cable

Slide to mute or unmute the microphone.

NOTE:
· The mic mute / unmute LED, button, / dial and RGB Lighting Zones on the headset do not work in 3.5mm audio connection.

– 10 –

With 2.4G wireless connection

2.4G

1. Plug the 2.4G USB wireless dongle into a USB-A port on your PC, Mac, PS4/PS5 or Nintendo SwitchTM.
2. Power on the headset. It will pair and connect with the dongle automatically.

Basic operation

Controls Volume dial
button button

Operation Adjust master volume. Rotate towards to increase game volume. Rotate towards to increase chat volume. Press to mute or unmute the microphone. Hold for more than 5 seconds to turn on or off the RGB light. Press briefly to turn ANC on or off. Hold for more than 2 seconds to turn TalkThru on or off.

– 11 –

To pair manually

5S
5S
1. On the headset, slide the power switch upwards and hold for more than 5 seconds until the status LED flashes white.
2. On the 2.4G USB wireless dongle, hold CONNECT for more than 5 seconds until the LED flashes white quickly. Both LEDs on the headset and dongle turn solid white after successful connection.
TIPS:
· The headset turns off automatically after 10 minutes of inactivity. · The LED enters connecting mode (flashing slowly) after disconnection from
the headset. · Compatibility with all USB-A ports is not guaranteed.
– 12 –

With Bluetooth (secondary connection)

01

2S

02

Settings Bluetooth

Bluetooth

DEVICES

ON

JBL Quantum810 Wireless Connected

Now Discoverable

With this function, you can connect your mobile phone to the headset while playing games, without worrying about missing important calls.
1. Hold on the headset for more than 2 seconds. The status LED flashes quickly (pairing).
2. Enable Bluetooth on your mobile phone and choose “JBL QUANTUM810 WIRELESS” from “Devices”. The status LED flashes slowly (connecting), and then turns solid blue (connected).

– 13 –

Control calls
×1 ×1 ×2
When there is an incoming call: · Press once to answer. · Press twice to reject. During a call: · Press once to hang up.
TIP:
· Use volume controls on your Bluetooth connected device to adjust volume.
– 14 –

Product Specifications
· Driver size: 50 mm Dynamic drivers · Frequency response (Passive): 20 Hz – 40 kHz · Frequency response (Active): 20 Hz – 20 kHz · Microphone frequency response: 100 Hz -10 kHz · Max input power: 30 mW · Sensitivity: 95 dB SPL @1 kHz / 1 mW · Maximum SPL: 93 dB · Microphone sensitivity: -38 dBV / Pa@1 kHz · Impedance: 32 ohm · 2.4G Wireless transmitter power: <13 dBm · 2.4G Wireless modulation: GFSK, /4 DQPSK · 2.4G Wireless carrier frequency: 2400 MHz – 2483.5 MHz · Bluetooth transmitted power: <12 dBm · Bluetooth transmitted modulation: GFSK, /4 DQPSK · Bluetooth frequency: 2400 MHz – 2483.5 MHz · Bluetooth profile version: A2DP 1.3, HFP 1.8 · Bluetooth version: V5.2 · Battery type: Li-ion battery (3.7 V / 1300 mAh) · Power supply: 5 V 2 A · Charging time: 3.5 hrs · Music play time with RGB lighting off: 43 hrs · Microphone pickup pattern: Unidirectional · Weight: 418 g
NOTE:
· Technical specifications are subject to change without prior notice.
– 15 –

Troubleshooting
If you have problems using this product, check the following points before you request service.
No power
· The headset turns off automatically after 10 minutes of inactivity. Power on the headset again.
· Recharge the headset (see “Charging your headset”).
2.4G pairing failed between headset and 2.4G USB wireless dongle
· Move the headset closer to the dongle. If the issue remains, pair the headset with the dongle again manually (see “To pair manually”).
Bluetooth pairing failed
· Make sure you have enabled Bluetooth feature on the device to be connected with the headset.
· Move the device closer to the headset. · The headset is connected to another device through Bluetooth. Disconnect the
other device, then repeat the pairing procedures. (see”With Bluetooth (secondary connection)”).
No sound or poor sound
· Make sure you have chosen JBL QUANTUM810 WIRELESS GAME as the default device in the game sound settings of your PC, Mac or gaming console device.
· Adjust volume on your PC, Mac or gaming console device. · Check game chat balance on PC if you are only playing game or chat audio. · Check that ANC is enabled while TalkThru is disabled.
– 16 –

· You may experience obvious sound quality degradation when using the headset near a USB 3.0 enabled device. This is not a malfunction. Use an extension USB dock instead to keep the dongle as far from the USB 3.0 port as possible.
In 2.4G wireless connection: · Make sure the headset and 2.4G wireless dongle are paired and connected
successfully. · The USB-A ports on some gaming console devices may be incompatible with JBL
QUANTUM810 WIRELESS. This is not a malfunction.
In 3.5mm audio connection: · Make sure the 3.5mm audio cable is connected securely.
In Bluetooth connection: · The volume control on the headset does not work for the Bluetooth connected
device. This is not a malfunction. · Keep away from sources of radio interference such as microwaves or wireless
routers.

My voice cannot be heard by my teammates
· Make sure you have chosen JBL QUANTUM810 WIRELESS CHAT as the default device in the chat sound settings of your PC, Mac or gaming console device.
· Make sure the microphone is not muted.

I can’t hear myself when I’m talking

· Enable sidetone via

to hear yourself clearly over game

audio. ANC/TalkThru will be disabled when sidetone is enabled.

– 17 –

License
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
– 18 –

HP_JBL_Q810_OM_V2_EN

810WIRELESS
QUICK START GUIDE

JBL QuantumENGINE
Download JBL QuantumENGINE to gain full access to features on your JBL Quantum headsets – from headset calibration to adjusting 3D audio to suit your hearing, from creating customized RGB lighting
effects to determining how the boom microphone side-tone works. JBLquantum.com/engine
Software requirements
Platform: Windows 10 (64 bit only) / Windows 11 500MB of free hard drive space for installation Always use the latest version of Windows 10 (64 bit) or Windows 11 for the most optimal experience on JBL QuantumENGINE
JBL QuantumSURROUND and DTS Headphone:X V2.0 available on Windows only. Software installation required.

001 WHAT’S IN THE BOX

Windshield foam for boom microphone

JBL quantum810 WIRELESS headset

USB charging cable

3.5MM AUDIO CABLE

USB WIRELESS DONGLE

QSG | WARRANTY CARD | Safety Sheet

002 Requirements

Connectivity 3.5 mm Audio Cable 2.4G Wireless
Bluetooth

JBL

SOFTWARE REQUIREMENTS

Platform: Windows 10 (64 bit only) / Windows 11 500MB OF FREE HARD DRIVE SPACE FOR INSTALLATION

PC

PS4/PS5 XBOXTM Nintendo SwitchTM Mobile

MAC

VR

Stereo

Not Compatible

Stereo

Not Compatible

Stereo

Not

Compatible Compatible

Stereo

Not Compatible

003 OVERVIEW

01 ANC / TALKTHRU LED

02 ANC / TALKTHRU button

03 Game audio-chat balance dial

04 Volume Control

05 Detachable Windshield foam

06 Notification LED for mic mute / unmute 01 07 Microphone Mute / unMute

08 CHARGING LED

02

09 3.5mm Audio Jack

03

10 USB-C port 04
11 Voice Focus Boom Microphone

12 Bluetooth pairing button

05

13 POWER ON / OFF slider

06

14 POWER / 2.4G / Bluetooth LED

15* RGB Lighting Zones

07

16 Flat-fold ear cup

08

17 2.4G PAIRING BUTTON

18 Volume Control

09

19 MIC MUTE BUTTON

10

11

17 16

15

18

14

19

13

12

004 POWER ON & CONNECT

01

power on

02 2.4G Wireless PC | mac | PLAYSTATIONTM |Nintendo SwitchTM

MANUAL CONTROLS

01

02

5S

005 Bluetooth

×1 ×1 ×2

01

02

ON

2S

Settings Bluetooth
Bluetooth DEVICES JBL Quantum810 Wireless Connected Now Discoverable

006 SETUP

007 BUTTON COMMAND

ANC on/off TALKTHRU ON/OFF

X1

2S

INCREASE GAME VOLUME INCREASE CHAT VOLUME

INCREASE MASTER VOLUME DECREASE MASTER VOLUME

Microphone Mute / unMute X1 ON / OFF >5S

ON OFF

2S BT PAIRING MODE

008 First time setup
8a Connect the headset to your PC via 2.4G USB wireless connection.
8b Go to “Sound Settings” -> “Sound Control Panel”. 8c Under “Playback” highlight “JBL QUANTUM810 WIRELESS GAME”
and select “Set Default” -> “Default Device”. 8d Highlight “JBL QUANTUM810 WIRELESS CHAT” and select “Set
Default” -> “Default Communication Device”. 8e Under “Recording” highlight “JBL QUANTUM810 WIRELESS CHAT”
and select “Set Default” -> “Default Device”. 8f In your chat application select “JBL QUANTUM810 WIRELESS CHAT”
as the default audio device. 8G Follow the onscreen instructions to personalize your sound
settings.

JBL Quantum810 WIRELESS Game

JBL Quantum810 WIRELESS Chat

009 MICROPHONE

Notification LED for mic mute / unmute

mute

unmute

010 CHARGING
3.5hr

011 LED BEHAVIOURS
ANC ON ANC OFF TALKTHRU ON MIC MUTE MIC UNMUTE
LOW BATTERY CHARGING FULLY CHARGED

2.4G PAIRING 2.4G CONNECTING 2.4G CONNECTED
BT PAIRING BT CONNECTING BT CONNECTED
POWER ON POWER OFF

012 TECH SPEC

Driver size: Frequency response (Passive): Frequency response (Active): Microphone frequency response: Max input power Sensitivity: Maximum SPL: Microphone sensitivity: Impedance: 2.4G Wireless transmitter power: 2.4G Wireless modulation: 2.4G Wireless carrier frequency: Bluetooth transmitted power: Bluetooth transmitted modulation: Bluetooth frequency: Bluetooth profile version: Bluetooth version: Battery type: Power supply: Charging time: Music play time with RGB lighting off: Microphone pickup pattern: Weight:

50 mm Dynamic drivers 20 Hz – 40 kHz 20 Hz – 20 kHz 100 Hz -10 kHz 30 mW 95 dB SPL @1 kHz / 1 mW 93 dB -38 dBV / Pa@1 kHz 32 ohm <13 dBm GFSK, /4 DQPSK 2400 MHz – 2483.5 MHz <12 dBm GFSK, /4 DQPSK 2400 MHz – 2483.5 MHz A2DP 1.3, HFP 1.8 V5.2 Li-ion battery (3.7 V / 1300 mAh) 5V 2 A 3.5 hrs 43 hrs Unidirectional 418 g

Connectivity 3.5 mm Audio Cable 2.4G Wireless Bluetooth

PC

PS4/PS5

XBOXTM

Nintendo SwitchTM

Mobile

MAC

VR

Stereo

Not Compatible

Stereo

Not Compatible

Stereo

Not Compatible

Stereo

Not Compatible

IC RF Exposure Information and Statement The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLQ810WL) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.002 W/Kg. The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user>s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.
IC RF Exposure Information and Statement for USB Wireless Dongle The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLQ810WLTM) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.106W/Kg.
Head operation The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user>s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
IC: 6132A-JBLQ810WL
Body operation The device was tested for typical bodily operations where the product was kept with 5 mm distance attaching away from the body. Noncompliance with the above restrictions may result in violation of IC RF exposure guidelines. Use only the supplied or approved antenna.
IC: 6132A-JBLQ810WLTM
Informations et énoncés sur l’exposition RF de l’IC. La limite DAS du Canada (C) est de 1,6 W/kg, arrondie sur un gramme de tissu. Types d’appareils: (IC : 6132A-JBLQ810WL) a également été testé en relation avec cette limite DAS selon ce standard. La valeur DAS la plus élevée mesurée pendant la certification du produit pour une utilisation au niveau de la tête est de 0,002W/Kg. L’appareil a été testé dans des cas d’utilisation typiques en relation avec le corps, où le produit a été utilisé à 0 mm de la tête. Pour continuer à respecter les standards d’exposition RF de l’IC, utilisez des accessoires qui maintiennent une distance de séparation de 0 mm entre la tête de l’utilisateur et l’arrière du casque. L’utilisation de clips de ceinture, d’étui ou d’accessoires similaires ne doivent pas contenir de pièces métalliques. Les accessoires ne respectant pas ces exigences peuvent ne pas respecter les standards d’exposition RF de l’IC et doivent être évités.
Informations et déclaration d’exposition aux RF d’IC pour le dongle sans fil USB La limite DAS du Canada (C) est de 1,6 W/kg en moyenne sur un gramme de tissu. Types d’appareils : (IC : 6132A-JBLQ810WLTM) a également été testé par rapport à cette limite SAR. Selon cette norme, la valeur SAR la plus élevée signalée lors de la certification du produit pour l’utilisation de la tête est de 0,106W/Kg.

Utilisation au niveau de la tête L’appareil est testé dans un cas d’utilisation typique autour de la tête. Pour respecter les standards d’exposition RF, une distance de séparation minimum de 0 cm doit être maintenue entre l’oreille et le produit (antenne comprise). L’exposition de la tête ne respectant pas ces exigences peut ne pas respecter les standards d’exposition RF et doit être évité. Utilisez uniquement l’antenne incluse ou une antenne certifiée. IC : 6132A-JBLQ810WL
Opération du corps L’appareil a été testé pour des opérations corporelles typiques où le produit était maintenu à une distance de 5 mm du corps. Le nonrespect des restrictions ci-dessus peut entraîner une violation des directives d’exposition aux RF d’IC. Utilisez uniquement l’antenne fournie ou approuvée. IC : 6132A-JBLQ810WLTM .
DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados. Este produto está homologado pela ANATEL, de acordo com os procedimentos regulamentados pela Resolução 242/2000, e atende aos requisitos técnicos aplicados. Para maiores informações, consulte o site da ANATEL www.anatel.gov.br

: , , 06901 , ., 400, 1500 : OOO” “, , 127018, ., . , .12, . 1 : 1 : 2 : www.harman.com/ru : 8 (800) 700 0467 , : OOO” ” , «-». , 2010 : 000000-MY0000000, «M» – ( , B – , C – ..) «Y» – (A – 2010, B – 2011, C – 2012 ..).

HP_JBL_Q810_QSG_SOP_V10

810
Wireless over-ear performance gaming headset with Active Noise Cancelling and Bluetooth

Sound is Survival.
Level up to the JBL Quantum 810 Wireless with Hi-Res certified JBL QuantumSOUND that makes even the tiniest audio details come in crystal clear and JBL QuantumSURROUND, the best spatial surround sound for gaming with DTS Headphone:X version 2.0 technology. With 2.4GHz wireless connection and Bluetooth 5.2 streaming and 43 hours of battery life that charges as you play, you’ll never miss a second. Designed for gaming environments, the voicefocus boom mic and noise suppression technology guarantee you’ll always come in clear whether you’re talking strategy with your team or ordering a pizza. Adjust the Discord-certified dial for the perfect balance, then run and gun all day and night with the convenience of a smaller 2.4GHz dongle and the comfort of premium leather-wrapped memory foam ear cushions.

Features
Dual surround sound Hear every detail with Hi-Res drivers Dual wireless Active Noise Cancelling technology for gaming Play & charge at the same time Game audio chat-dial for Discord Directional microphone Durable, Comfortable Design Optimized for PC, compatible with multiple platforms

810
Wireless over-ear performance gaming headset with Active Noise Cancelling and Bluetooth

Features and Benefits
Dual surround sound Feel like you’re stepping inside the game with JBL QuantumSURROUND and DTS Headphone:X version 2.0 technology that lets you experience immersive, multichannel 3D audio all around you.
Hear every detail with Hi-Res drivers Fully immerse yourself in JBL QuantumSOUND. Hi-Res 50mm drivers position even the tiniest audio details with pinpoint accuracy, from the twig snap of an enemy moving into position to the steps of a zombie horde shuffling up behind you. When it comes to gaming, sound is survival.
Dual wireless Never miss a second with the dual solutions of lossless 2.4GHz wireless and Bluetooth 5.2 eliminating audio lags and dropouts.
Active Noise Cancelling technology for gaming Designed for gaming environments, the JBL Quantum 810 Wireless’s Active Noise Cancelling system eliminates unwanted background sounds so you can stay fully engaged in your mission without distractions.
Play & charge at the same time Game all day and night with 43 hours of battery life that charges as you play. Unlike some teammates out there, JBL Quantum 810 Wireless never quits–and never lets you down.
Game audio chat-dial for Discord Thanks to separate sound cards, the Discord- certified dial lets you customize the perfect balance of game and chat audio in your headset without a break in the action.
Directional microphone The JBL Quantum 810 Wireless’s directional voice-focus boom microphone with flip-up mute and echo-canceling technology means you’ll always come through loud and clear, whether you’re talking strategy with your team or ordering a pizza.
Durable, Comfortable Design The lightweight, durable headband and premium leather-wrapped memory foam ear cushions are designed for total comfort, no matter how long you play.
Optimized for PC, compatible with multiple platforms The JBL Quantum 810 Wireless headset is compatible via 2.4GHz wireless connection with PC, PSTM (PS5 and PS4) and Nintendo SwitchTM (only when docking), via Bluetooth 5.2 with Bluetooth compatible devices and via 3.5mm audio jack with PC, PlayStation, XboxTM, Nintendo Switch, Mobile, Mac and VR. The features powered by JBL QuantumENGINE (JBL QuantumSURROUND, RGB, EQ, Microphone settings etc.) are only available on PC. Check the connectivity guide for compatibility.

What’s in the box:
JBL Quantum 810 Wireless headset USB Charging cable 3.5mm audio cable USB wireless dongle Windshield foam for microphone QSG | Warranty card | Safety sheet
Technical specifications:
Driver size: 50mm Dynamic drivers Frequency response (Active): 20Hz 20kHz Microphone frequency response: 100Hz 10kHz Max input power: 30mW Sensitivity: 95dB SPL@1kHz/1mW Maximum SPL: 93dB Microphone sensitivity: -38dBV@1kHz/Pa Impedency: 32 ohm 2.4G Wireless transmitter power: <13 dBm 2.4G Wireless modulation: /4-DQPSK 2.4G Wireless carrier frequency: 2400 MHz 2483.5 MHz Bluetooth transmitted power: <12dBm Bluetooth transmitted modulation: GFSK, /4 DQPSK, 8DPSK Bluetooth frequency: 2400 MHz – 2.483.5 MHz Bluetooth profile version: A2DP 1.3, HFP 1.8 Bluetooth version: V5.2 Battery type: Li- ion battery (3.7V/1300mAh) Power supply: 5V 2A Charging time: 3.5hrs Music play time with RGB lighting off: 43hrs Microphone pickup pattern: Unidirectional Weight: 418 g

HARMAN International Industries, Incorporated 8500 Balboa Boulevard, Northridge, CA 91329 USA www.jbl.com

© 2021 HARMAN International Industries, Incorporated. All rights reserved. JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners. Features, specifications and appearance are subject to change without notice.