TRION T4002 Electronic Air Cleaners User Manual
- June 5, 2024
- Trion
Table of Contents
TRION T4002 Electronic Air Cleaners
Engineered Solutions For Clean Air
The Trion® T-Series is ideal for the removal of smoke, fumes, and oil/coolant smoke and mist. The T-Series has the ability to clean contaminated indoor air and recirculate it back to the work area, reducing energy costs by not having to exhaust conditioned air to the outside. Models T1300, T2600 and T5200 can be installed either unducted or ducted for source capture. Models T1001 and T2002 are designed for ducted applications.
Features
- Ceramic Insulators (stand off)
- Solid State Power Supply
- Spiked Ionising Blades
- Extra Depth Collector Cells
- Totally Enclosed Fan Cooled Motor (Blowerd Units)
- Electrical Component Box Mounted out of Air Stream
- Modular Approach for Greater Flexibility
Benefits
-
Ceramic Insulators — Out of Airstream for Increased Reliability
-
Extra Depth Collector Cell with Greater
Dirt Holding/Collection Capacity -
Spiked Ioniser — No Ionising Wires to Replace, Reducing Maintenance: No Consumable Parts
-
High Efficiency — up to 95% on Single Pass and 99% on Double Pass Option (DOP Test Method)
-
Permanent Ioniser/Collector Elements — No Consumable Filter Cost; Just Wash, Dry and Reinstall
-
Low Pressure Drop (90 Pa — Lower Energy Cost to Operate Compared to Media and Cartridge Units
-
Hinged Door Filter Access — Quick &
Easy access — No Tools Required
How it Works
The Trion® T-Series utilizes the principle of Electrostatic Precipitation. Air
is drawn by the motor/blower through a washable metal mesh pre-filter which
traps large dust particles. The remaining particles, some as small as 0.01
microns, pass into a strong electrical field (ionising section) where the
particulate receives an electrical charge. The charged particles then pass
into a collector plate section made up of a series of equally spaced parallel
plates. Each alternate plate is charged with the same polarity as the
particles, which repel, while the interleaving plates are grounded, which
attract and collect. 
Air Boss® T4002 Specifications
T4002
| Dimensions | 635L x 1085W x 1073H mm |
|---|---|
| Installation | Free Standing, Wall or Frame Mounted |
| Unit Weight | 160 kg |
| Input Voltage | 230Vac/1phase/50 Hz |
| Cell Power | 100 watts |
| Output Voltage | 12 kV/6 kV |
| No of cells | 4 |
| Cell Weight | 15 kg |
| Air Volume | 4420 – 8840 m 3/hr |
| Controls | On/Off Switch with Indicator |
Pre-filter
| Aluminum Standard Mesh (Optional Impinger)
Primary Filter| Electronic Ioniser/Collector Cell
After Filter| Optional Disposable Charcoal After Filter
Power Supply| High Frequency Solid State Design
Efficiency
| To 95% Based on D.O.P. Test Method To 99% for Double Pass (Calculated)
General
| Multiple Units Can Be Joined Together for
Increased Volume or Efficiency
Top View
Discharge End
Front View & Intake End 