MGI BORESCOPE720 720P Wi-Fi Borescope User Manual
- June 5, 2024
- MGI
Table of Contents
- MGI BORESCOPE720 720P Wi-Fi Borescope
- THANK YOU FOR PURCHASING THE BORESCOPE720
- GET FAMILIAR WITH YOUR DEVICE
- OPERATING YOUR DEVICE
- APP ICON EXPLANATION
- EXPORTING VIDEOS/PHOTOS FROM THE APP
- TROUBLESHOOTING
- SPECIFICATIONS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MGI BORESCOPE720 720P Wi-Fi Borescope
THANK YOU FOR PURCHASING THE BORESCOPE720
Please read this manual before operating the device and keep it handy.
Your purchase should include:
- 1 x BORESCOPE720
- 1 x Wi-Fi Module
- 1 x Micro USB to USB Cable
- 1 x Attachable Hook
- 1 x Attachable Magnet
- 1 x Attachable Side View Mirror
- 2 x 3M Adhesive Suction Cup Pads
GET FAMILIAR WITH YOUR DEVICE
- A. Power Button
- B. Indicator LEDs
- C. Camera Connection Port
- D. Charging Port
OPERATING YOUR DEVICE
IMPORTANT NOTICE: Allow the device to charge 4-6 hours before using it.
HOW TO CHARGE THE DEVICE
- Plug the Micro USB cable into the charging port on the device (figure D) and the other end into a wall charger or your computer.
- The indicator light will be a solid red while charging.
- The indicator light will turn off once done charging.
HOW TO CONNECT TO THE DEVICE
- Download the ‘WiFi Check’ app from the app store or go to the below links.
- Android – www.minigadgets.com/wcdroid
- iOS – www.minigadgets.com/wcios
- Plug the end of the borescope cable into the camera connection port of the wi-fi module (figure C).
- Power the wi-fi module on by pressing the power button (figure A) for 2 seconds and letting go.
- a. The indicator lights will turn a solid blue and green.
- The wi-fi module will begin broadcasting its own wi-fi signal. Go to your phone’s wi-fi settings and connect to the wi-fi signal that starts with “DN”.
- a. EXAMPLE: “DN-B30E”
- Once your phone is connected to the network, open the WiFi Check app on your smartphone or tablet.
- The application will automatically start up with a view of what the borescope is seeing.
APP ICON EXPLANATION
- Photo Capture
- Video Capture
- Photo/Video Album
- 360-degree view rotation
- 180-degree view rotation
- Resolution adjustment
EXPORTING VIDEOS/PHOTOS FROM THE APP
- Photos and videos are automatically saved to your phones gallery upon hitting the Photo or Video capture buttons.
- a. If this does not happen, please make sure the app has permissions to access your photos.
ADJUSTING THE FLASHLIGHT
- Scroll up or down on the scroll wheel located on the borescope cable to increase or turn down/off the flashlight LEDs
TROUBLESHOOTING
THE DEVICE WON’T TURN ON
- Charge the device for at least 4 hours before the first use.
- Make sure the device is securely connected to the charging source.
OTHER PROBLEMS
- Call our technical support at 770-694-6921
SPECIFICATIONS
Battery Life | ~120 Minutes |
---|---|
Water Resistant | Waterproof rating IP67 |
Type of Memory | Utilizes phone storage |
Viewing Angle | 70° |
Video Format | .MP4 |
Record/Streaming Resolution | 720P |
Operating
Systems
| Android 6 & up
iOS 8 & up
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>