BURG WACHTER Noise 2162 WiFi alarm siren User Manual

: June 5, 2024
: BURG WACHTER

BURGsmart PROTECT Noise 2162

Assembly and user manuals
Manuel

Scope of delivery

1x NOISE 2162
2x CR123A batteries
1x set of screws and dowels
1x USB / microUSB cable
1x instructions

Equipment features

Wi-Fi alarm siren with temperature and air humidity sensor
Operation with 2x CR123A batteries or miniUSB cable + power supply unit*
Choose from 18 sounds, volume up to 90 dB
Alarm clock / timer function
Compatible with 2.4 GHz Wi-Fi, standard IEEE 802.11 b/g/n
Smart scenes configuration for linking with other devices
App operation, push notification in case of alarm or low battery
An internet connection is required for operation
Compatible with Amazon Alexa
Can be used alone or in conjunction with BURGsmart PROTECT devices

*Not included in delivery

Product description

The BURGsmart PROTECT Noise 2162 alerts you by alarm signal and optionally by push notification if a linked device reports an alarm or if a preset temperature or the relative humidity is exceeded/fallen below. The system informs you about the current battery level in the app. By linking with other BURGsmart PROTECT components, you can create scenarios. Optionally, the system can be operated by battery or USB power supply*.

Note: The siren is not waterproof and is intended for indoor use. Warranty claims are void in the event of improper use. 2.4 GHz Wi-Fi and an internet connection are required.

*Not included in delivery

Safety guidelines

Please read the instructions carefully. No liability can be assumed for any damage which may result from failure to follow instructions. The device must be used only for the purpose specified in the instructions. The device should work effectively as an alarm in an emergency! Please check regularly that the device is in working order and that the batteries are charged. This will ensure that it functions correctly in the event of a (hopefully unlikely) emergency.
Due to unusually high electromagnetic radiation, manipulation, or other influences, malfunctions may be triggered. The device must not be installed in damp areas or near electrical devices which emit radiation. Battery operated devices must not be used in high temperatures, near sources of heat, or exposed to direct sunlight. Ensure that packaging and contents are kept well away from children to avoid any risk of suffocation. Please keep instructions in a safe place.

Drawing

Status LED

LED display	Description
Very fast flashing	Alarm mode
Rapid, persistent flashing	Device is in setup mode
Slow, persistent flashing	Device is in Access Point (AP) setup mode
4 seconds on / 2 seconds off	Reset

Technical details

Type of battery	2x CR123A
Alternative permanent power supply	=5V DC MicroUSB, 1A
Volume	Up to 90 dB
Air humidity measurement range	0 % – 99 % ± 10 %
Temperature measurement range	-10°C – 40°C ± 2°C
Max. range inside	<20 m*
Frequency band	2.4 GHz
Supported radio standards	IEEE 802.111 b/g/n
Max. output	<10 mW (10 dBm)
Working temperature range	0°C – 40°C
Air humidity	20 % – 85 %
Weight	150 g
Dimensions (H x W x D)	56 x 56 x 68 mm

Installation instructions

Check the strength of the Wi-Fi signal at the site of installation with your smartphone. The reception quality should be at least two graduation marks to be able to guarantee an alarm.
First remove the battery strap from the siren.
Set up the sensor in the app before installation and test the function.
Fasten the Noise 2162 with adhesive tape if the surface allows a secure hold. Otherwise, use the enclosed screws and dowels to fix the detector in the desired position. Use a 4 mm drill bit for the hole. Mark the drilling depth on the drill, e.g. with a pen or adhesive tape. Before drilling, check whether there is a risk of hitting water, gas, or electricity lines, for instance.
Avoid installation on metallic surfaces and near live cables, as these may impair the function.
Note: If you have aluminium or metal frames/doors, test whether the function works reliably at the desired position before mounting.
Mount the Noise 2162 in the desired position.

Correct location for installation

The radio signal of the sensor is highly dependent on environmental conditions. Metal objects, concrete surfaces, walls and metallic wiring can also reduce the range. The device can also be impaired by other radio signals and environmental influences. Check the function after installation.

IMPORTANT NOTE: The alarm can only work as well as permitted by its installation and environment. The alarm can alert you of dangerous situations but it cannot prevent them.

The device must not be painted, varnished or altered in any way.

Replacing the battery/reset button

To change the battery or press the reset button, the Noise 2162 must be opened. Place the siren in one hand and turn the top shell clockwise (counter clockwise) with the other hand to open (close) it.

Resetting to factory settings

To reset the device to factory settings, press and hold the reset button for at least 10 seconds.
Please note that you must delete the device from your account in order to use it in other apps.
Please also note that each device is bound to one account and must first be deleted from your account if you wish to hand it over to another person or the service team.

Setup via the BURG-WÄCHTER Key App

The following setup describes the state of the app at the time of production. The latest version of the app may differ. Please download the latest version of the manual from our website:

https://www.burg.biz/service-downloads/manuals/

Privacy notice: You can find the current privacy policy in the app and on our homepage at: https://www.burg.biz/datenschutz/secuentry-apps/

Setup

The setup of the listed BURGsmart PROTECT components is identical.

BURGsmart PROTECT Contact 2032
BURGsmart PROTECT Motion 2012
BURGsmart PROTECT Noise 2162
BURGsmart PROTECT Water 2062

Connect your smartphone with the 2.4 GHz Wi-Fi connection in which you would like to integrate the sensor. Disable the 5 GHz Wi-Fi for the duration of the setup.
Remove the battery fuse. The LED of the LED of the system starts flashing quickly (~3x per second).
Note: If it flashes slowly (<1x per second), the device is in AP mode. You can change the mode by holding down the reset button for approx. 3 seconds to follow the instruction steps immediately.
Start the key app and select BURGsmart PROTECT in the menu.
Select “Register and Settings” in the menu that appears.
Press the “+” button in the device list.
Enter an individual device name and your Wi-Fi password to carry out the registration. The registration process can take up to one minute.
The device is then listed in the device list. The setup is complete at this point.

Note: If the setup fails at the first attempt, reduce the distance between the sensor, smartphone and router. You can find more help options on our homepage in the FAQs area.

Operation via the BURG-WÄCHTER Key App

In the BURGsmart PROTECT/Show State menu item, the device-specific settings can be opened and adjusted by selecting the desired component from the device list.
Select the siren to access the sensor-specific view. Tapping the buttons takes you to the respective submenus and you can, for example, view the alarm history and the opening status or change the notification settings.

Limitation of liability

This device complies with the technical standards in force at the time of production. We constantly strive to ensure that our products are in line with the latest technology and that our handbooks are kept up to date. We therefore reserve the right to undertake technical changes and modifications or adjustments to the instructions without providing advance notice. The instructions must be carefully followed. We accept no liability for damage, as a result of e.g. incorrect use or installation, improper handling, insufficient or poor maintenance, disregard of safety guidelines or general conditions of use. When installed and used correctly and under the conditions specified, this device performs the functions described in the handbook. As the alarm is dependent upon the specific arrangement put in place by the customer, there is no guarantee that it will be triggered.

Warranty

BURG-WÄCHTER products comply with the technical standards in force at the time of production and adhere to our own quality standards. The guarantee only covers defects which can be proved to have resulted from production or material defects at the time of purchase. The warranty ends after two years, further claims are excluded. Any defects found must be submitted to your seller in writing, including the original purchase receipt and a brief description of the defect. After the device has been tested, and within an appropriate period of time, the guarantor will decide whether or not to repair or exchange the item. Any defects or damage which may have resulted from transport, inappropriate or improper use, wear and tear etc. are not included in the guarantee. The battery is not included in the guarantee.

More BURGsmart PROTECT accessories

We would like to recommend the following products for combination with this device:

Plug 2142

Wall socket adapter| Motion 2012

PIR motion detector with temperature and air humidity sensor
---|---
Water 2162

Water detector| Contact 2032

Door/window contact
BURGcam LIGHT 3010

White light LED light with day/night camera and intercom function for the entrance area|

Notes on disposing of the device

Please be aware that electrical and electronic equipment and batteries marked in this way must not be disposed of with household waste but collected separately. Please obtain information on the collecting points for electrical waste from the responsible authority of your city/municipality.

BURG-WÄCHTER KG hereby declares that this device complies with Directive 2014/53/EU (EMC), 2011/65/EU (RoHS), 2014/53/EU (RED).
The complete text of the EU Declaration of Conformity can be found at the following internet address: www.burg.biz. If you have any technical questions concerning the product, please read the detailed operating instructions and observe the FAQs that can be found on the following homepage: www.burg.biz.
Should you still have questions, please contact us via email at: alarmservice@burg.biz

Legal notice

The copyright for these operating instructions are held exclusively by BURG- WÄCHTER KG. Any reproduction, even into digital storage media requires the written consent of BURG-WÄCHTER KG. Reprinting, even excerpts, is forbidden. All company and product names are trademarks or registered trademarks or brands of the respective owners. Subject to errors and technical changes. Subject to errors and technical changes.

© Copyright:

BURG-WÄCHTER KG Altenhofer Weg 15 58300 Wetter, Germany www.burg.biz