TALLY LIGHTS 418770 Wirecast Light System User Guide
- June 5, 2024
- TALLY LIGHTS
Table of Contents
Wirecast Quick Start Guide
Thank you for using the Professional TallyLights™ Controller. This guide
introduces the Installation, and operation of the TallyLights™ Controller and
Wirecast software. Prior to installation and usage, please read the manual
thoroughly. If you have any questions about the capabilities of the product,
email our support team at
support@tallylights.com or call
484-593-2584
Wirecast Installation (Windows)
- Use the included USB A-B cable to connect the TallyLights™ Controller to your computer.
- Download the Wirecast for Windows TallyLights™ Controller software.
- Install the software using the wizard.
Wirecast Installation (Mac)
- Use the included USB A-B cable to connect the TallyLights™ Controller to your computer.
- Download the Wirecast for Mac TallyLights™ Controller software.
- Install the software by dragging the Tally-Lights 1.0 application to the Applications folder.
Wirecast Configuration
- Start up the Wirecast TallyLights™ Controller software.
- Use the configuration matrix to map the camera sources to the tally light output.
- The setup is complete. The emitters will now trigger when set to Program and Preview through Wirecast.
TallyLights.com
support@tallylights.com
484-593-2584 (9am-5pm EST)
WWW.TALLYLIGHTS.COM
Documents / Resources
|
TALLY LIGHTS 418770 Wirecast Light
System
[pdf] User Guide
418770 Wirecast Light System, 418770, Wirecast Light System
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>