TALLY LIGHTS 418770 vMix Lighting System User Guide
- June 5, 2024
- TALLY LIGHTS
Table of Contents
vMix Quick Start Guide
Thank you for using the Professional TallyLights™ Controller. This guide introduces the Installation, and operation of the TallyLights™ Controller and vMix software. Prior to installation and usage, please read the manual thoroughly. If you have any questions about the capabilities of the product, email our support team at support@tallylights.com or call 484-593-2584
vMix Controller Installation
- Use the included USB A-B cable to connect the TallyLights™ Controller to your computer.
- Download the vMix TallyLights™ Controller software.
- Install the software using the wizard.
- By default, the install wizard creates the following folder when utilizing the vMix software video mixer program. a) “C:\Program files(x86)\Tally Lights LLC” (most software video mixers)
Controller Configuration
-
Open the mixing software on your computer.
-
Add the cameras to the first 8 inputs of your vMix software video mixer.
a) The cameras must be set to the first 1-8 sources to ensure compatibility with the controller. -
Setup is complete. The emitters will now trigger when set to Program and Preview through the mixing software.
TallyLights.com
support@tallylights.com
484-593-2584 (9am-5pm EST)
WWW.TALLYLIGHTS.COM
Documents / Resources
|
TALLY LIGHTS 418770 vMix Lighting
System
[pdf] User Guide
418770 vMix Lighting System, 418770, vMix Lighting System
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>