TTLock iLock01 Smart Lock User Manual

TTLock iLock01 Smart Lock

Safety and precautions

• Smart door lock as high-tech products, the installation of good or bad directly affect the normal operation and service life of the door lock, it is recommended that you install the door lock after the room has been decorated, please choose to ensure the quality of personnel to install, the factory strictly according to the company’s installation standards for operation.
• do not use in environments with strong radiation, high magnetic field, and high temperature with corrosive substances, so as not to affect the performance and life of the smart lock.
• Please initialize the door lock as soon as the door lock installation is completed and restore the lock to the initial state. And please set your electronic key Settings immediately after initialization to prevent others from illegally opening your door lock.
• Please use or change the same brand 4pcs AAA 1.SV alkaline battery, mix using of New Old battery OR using Non-destructive battery will destroy your door lock.
• In order to better feel the convenience and advancement of the company’s products, please carefully read this manual before use, if there are any doubts, can directly to the company’s customer service center or headquarters service center, the company has professional technical personnel for your eyes, to ensure your use of rest assured.
• Battery not included on shipment.

Dual latch install diagram

Remind
Product performance Ideal for home, office indoor door lock Suitable to 38-S0mm thickness door
Determine the door direction
Stand outside of the door Adjust the direction of the handle and latch bolt accordingly to the opening direction when installing the door.
Change lock body direction
When installing the lock body, the latch bolt is on the upper side, the deadbolt under the latch bolt, and the inclined surface of the latch bolt is facing the opening direction.

1. Reserve the lock body and latch bolt is down (refer to picture 2)
2. Push the latch bolt lower than front plate, stop block is down and rotate 180 degrees (refer to picture 2)
3. Push the latch bolt into hole (refer to picture 3)

1 Appearance & Dimensions[

](https://manuals.plus /wp-content/uploads/2022/07/TTLock-iLock01-Smart-Lock-2.png)
2 Appearance & Dimensions
3 Appearance & Dimensions

Cutting template

1. Please refer template carefully to drill the hole.
2. If there is a deviation in the hole, the lock body and panel assembly are put into the door and the hole is corrected until appropriate.

Handle Reversing Method[

](https://manuals.plus /wp-content/uploads/2022/07/TTLock-iLock01-Smart-Lock-6.png)

1. Remove the cross screw as the drawing and turn the handle up 180 degrees in the direction of the arrow
2. After adjusting the direction of the handle, then install the cross screw to the original position and tighten it to complete the reversing.

Install lock body & Strike Box

Mounting the lock body to the door with screws requires that the lock body be installed and kept parallel to the door panel
The door buckle plate shall be installed directly opposite the lock body. The buckle plate hole shall correspond to the latch of the lock body. If there is any deviation, it shall be adjusted.
Install lock
Front panel and back panel docking power cord
Door direction: Right open
Door direction: Right open install lock body & Strike Box Mounting the lock body to the door with screws requires that the lock body be installed and kept parallel to the door panel
The door buckle plate shall be installed directly opposite the lock body. The buckle plate hole shall correspond to the latch of the lock body. If there is any deviation, it shall be adjusted. Install lock
Front panel and back panel docking power cord Door direction: Right open

Door direction: Left open Handle reverse drawing

Handle Reversing Method

1. Remove the cross screw as the drawing and turn the handle up 180 degrees in the direction of the arrow
2. After adjusting the direction of the handle, then install the cross screw to the original position and tighten it to complete the reversing.

Installation Diagram

1. Make sure the open direction to choose the metal accessories
2. Fix the lock body
3. Fix the decor plate
4. Fix the metal plate

Installation diagram

Connection cable connect with front panel & rear panel.

Door direction: Right open [

](https://manuals.plus/wp-content/uploads/2022/07/TTLock-iLock01 -Smart-Lock-17.png)Door direction: Left open

Function and Operation

1. Unlock information: refers to the input fingerprint, password or IC card information (including administrators and ordinary users).
2. Key “*” : Clear key/back key.
3. Key “#” : Confirmation key or menu function key.
4. Unlock information: refers to the input fingerprint, password or IC card information (including administrators and ordinary users).
5. Key “*” : Clear key/back key.
6. Key “#” : Confirmation key or menu function key.

Access door lock function management

Administrator settings

1. Add administrator press “1” Add administrator press “1” , enter administrator information, input fingerprint or password(Fingerprint inputting 4 times, password input 6- 8 bit digital twice(888888#), IC card input once.

2. Delete administrator information press “2”
   Enter number press# confirm(002#)(Unable to delete all, the first administrator reserved)

3. Add a network
   Hotspot connection press “1”
   Intelligent connection press “2” (TUYA) Remote unlocking: wake up the screen and press “9” + “#” . There will be a voice prompt: requesting remote unlocking.

Hotspot connection mode;
Intelligent connection mode;
When the network is successfully added, the “*'”‘5″”1 “”2″Iights on the keyboard in order, and voice prompt “successful”

1. When the network add failure, the “*””5″”1 “”2”none lighting, voice prompt “Failure”
   User setting Add user Press “1” voice prompt: please input user information, input fingerprint or password( fingerprint input 4 times, password input 6-8 bit digital twice), IC card input one time. It can input another user information after it successfully.

2. Press “2” for delete user
   Press “2” voice prompt: press “1” input number delete, press “2” delete all, press “1” input number(010#) delete success.

3. System setting]

   • Press “3” voice prompt: press “1” for voice setting; press “2” for unlock mode setting; press “3” language setting, press “4” time setting, press “5” for modify room number.
   • Unlock mode setting
     Press” 2″ voice prompt: press “1” for single unlock, press “2” for combine unlock. Press “1” voice prompt: operate success.

4. Language setting

   • Press “3” voice prompt: press “1” for voice setting; press “2” for unlock mode setting; press “3” language setting, press “4” time setting, press “5” for modify room number.

   • Unlock mode setting
     Press” 2″ voice prompt: press “1” for single unlock, press “2” for combine unlock. Press “1” voice prompt: operate success.

   • Language setting

Other notes

1. The system will automatically enter the invalid input state if the unauthorized unlocking information is continuously incorrectly input for more than 5 times within 5 minutes, and the invalid input state will lasts for 90 seconds.
2. After the voltage is lower than 4.5v, the lock will automatically alarm every time when it is opened. After the alarm, the lock can be opened for 200 times. After the number of times exceeds, each unlock delay is 5 seconds, new batteries must be replaced before the number of times available.
3. Password peeping prevention function: Input password as follows when opening the door with password: XXX password XXX; you can add some extraneous codes before and after the password, and then press # to confirm. The password must be included in the input contents.
4. If there is no operation more than 10 seconds , system will automatically exit.
5. initialization setting: Press the restore key under the battery cover on the rear panel of the lock around 6-8 seconds, all the unlock information and records will clear after initialization (Please carefully operation)
6. Normal open mode under close status, press 5 #, voice prompt “please input unlock information” , input unlock information, voice prompt “Normal open mode, please attention to lock” .
7. Normal open mode under open status, press “5#” , voice prompt ” Normal open closed)
8. Anti-lock function: After pressing back locking key, the voice says “the door is locked”. Now, ordinary users cannot open it, and only administrators can unlock.
9. under initialization status, input “555666888” ,support switch language of “English and Chinese” .

Technical Parameters

• Power supply: 4.5V-6V(4pcs AA batteries)
• Quiescent current: <50-65uA
• Administrators number: 9
• Unlock methods: Fingerprint, IC card, Password, Key, WeChat Mini program, Tuya smart(Optional) Working current: > 250uA
• Fingerprint: < = 50
• Card:<=100
• Password: < = 100
• Password length: 6-8 bit
• Phantom password: 16 bit
• Lower voltage alarm: 4.5±0.2V
• Working temperature: -10°C~60°C
• Working relative humidity: 20% ~ 93%

Warranty Card

The Company provide life-long maintenance for the sale of products , from the date of purchase within one year, the company provides free warranty service;If the following cases are not held for free warranty services:

1. If there is no product warranty card or valid purchase voucher, the warranty card and purchase certificate do not match the product;
2. Damage caused by human factors, including use in an abnormal working environment, damage caused by the use of a non-stated manual, etc.;
3. The user’s private dismantling, self-repair, modification or maintenance by a non-authorized unit of the Company or other irresistible factors damaged”

Note to users:
In order to protect your Legal rights, please keep the service card and the relevant purchase voucher, to protect your legal rights in warranty services,

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>