TTLOCK TM-D2 Digital Keyless Smart Door Lock Installation Guide

TTLOCK TM-D2 Digital Keyless Smart Door Lock Installation Guide

Package Content

A (front panel)

B (rear panel)

C (gusset)

D (buckle box)

E (lock body)

F (M4*8 flat head screw)

G (M4*25 flat head screw)

H (M4*20 wood screw)

I (IC card)

Z (key

INSTALLATION CONSTRUCTION

Install the door lock

Use self-tapping screws to fix the lock body gusset box to the lock body small hole. downward As shown in Figure 1

Align the front panel vertically with the hole and insert it into the lock body (the lock ruler is inserted in a “1” shape)

The connecting wire must pass under the lock body.

Remove the built-in screws on the rear panel and take off the built-in board.

Align the holes of the built-in board and fix them with flat head screws.

Tighten the screws after keeping the built-in board and the front panel vertical.

Insert the cable into the connector.

The deadbolt is on the right side of your installation and the knob arrow is up. The deadbolt is on the left side of your installation, the knob arrow goes down.

Align the lock ruler and insert and fix the screw.

After the installation is completed, the front panel and the rear panel are kept in a vertical line, and then insert the key to test whether the switch lock is smooth.

Remove the battery cover, install AAA1.5v batteries, and close the battery cover.

After installing the battery, please test whether the left and right door opening positions are correct. If the switch direction is opposite, please wake up the screen and input “666888#” and hear a long “beep”, which means that the direction switch is not successful.

(Note that the switch must be initialized without registering an administrator, and the switch will be invalid after entering the administrator)

Smart Lock (TTLock) Operation Manual
Product advantage and features

• Multiple door opening modes are available to enhance the security level of the lock;

• With anti-peeping password function;

• Power on self-test, intelligent identification function module, quick optional functions.
  such as fingerprint + password + card + key, etc.;

• All components are international famous brand products, with stable and reliable quality:

• Door lock modules are water-proof, moisture-proof, mold-proof treated;

• Door lock modules are tested for high and low temperature, vibration, aging, etc., to
  adapt to the harsh environment

Download APP

1.   Add Bluetooth administrator

Enable the Bluetooth of your phone, click “+” on the list of “TTLock” app to add “All Locks” and touch the numeric keypad to wake up the screen, the app will search for the door lock device, click “Add” as the lock administrator. When adding, please select the right door or left door direction according to the actual situation, as shown in the figure:

Phone app switch lock

1.  Click the “lock icon” in the main interface of the app to unlock or unlock
   (click to unlock, long press to unlock).

2.  Long press the “ ” on the front panel to quickly lock;

Add fingerprint, password and card

1. Click “Passcodes”, “Cards” and “Fingerprints” in the main interface of the app, select the me limit of the key according to the requirements and enter the information according to the prompts;
2. The custom password option is set by the user, and the password for other function options is automatically generated by the system (the generated password must be used (activated) once within 24 hours, otherwise it will automatically expire;

Delete fingerprint, password and card

Click “Passcodes”, “Cards” and “Fingerprints” in the main interface of the app, and click on the added information to modify or delete it.
View unlock record
Click “Records” in the main interface of the app to view all unlock records, select in the upper
right corner to “Refresh Records”, “Clear records”, and “Export records”;

Add authorized administrators

Click “Authorize Admin” in the main interface of the app, select limited-time or permanent
administrator according to your needs, and enter the administrator’s “TTLock” account
number and note name to add an administrator;

Delete device (Forced initialization of the device ）

1.  Click “Settings” on the main interface of the app and select “Delete” and enter the account login password to delete the device, all data will be cleared and the door lock will need to be re-bound.

2. Or long press the settings button on the back panel for 5S, and enter the initialization password “000#” to force the initialization, all data will be cleared and the door lock will need to be re-bound;

1. Push the back lock button on the back panel for electronic back lock/ unlock.
   (Only the app administrator can unlock normally after back lock, other
   fingerprints, passwords, cards and authorized administrators cannot unlock
   and it will prompt: “The door has been back locked”)2

2. The “Electronic back lock” can be enabled or disabled by “Settings” on the
   main interface of the app;

One-key unlock

1.  Press the “One-key unlock” button on the back panel to unlock or lock;
2.  The door can be locked and unlocked through the mechanical manual knob;

Product technical parameters

100 sets
Virtual password length| ≤16 digits| This product has virtual anti-peeping password: garbled code can be entered before and after the registered password
Low voltage alarm| 4.7V ±0.2V| 4.7V ±0.2VWhen the voltage is below 4.7V, the red indicator lamp will flash continuously for 5 times, with voice prompt “Low battery, please replace in time”, you can continue to unlock for about 100 times; when the voltage is below 4.5V, the door cannot be unlocked.
Quiescent current| ≤80uA|
Dynamic current| >250mA|
Power voltage| 6V| Voltage when the new battery is fully charged (please select high quality 5# alkaline 1.5V battery)
Emergency power supply| 5VDC| USB type-C port
Working temperature| -25℃～70℃|
Working humidity| 20%～90%RH|
Audio navigation|

English/ Chinese voice

| English: 39# Administrator password #1#; English: 39# administrator password #2#; (If no administrator password is available, use the initial password 123456 instead)
Error alarm| Support| After wrong fingerprint/ password / card/ key is entered for 3 times, the door will be locked for 1 minute
Electronic back lock| The administrator can unlock| Push the back lock button to for electronic back lock/ unlock. (Only the app administrator can unlock normally after back lock, common users cannot unlock and it will prompt: “The door has been back locked”)
Quick lock| Outdoor quick lock| Long press “ ***** ” to lock immediately
Wire magnetic switch| (Only optional product supports the function)| After installing the door magnetic switch, plug in the power cord, when the door is closed, the door magnetic switch will sense and immediately automatically lock;

Tips: please store your mechanical key outdoors for spare!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>