niceboy Hive Pods 2 Bluetooth Earphones User Manual
- June 3, 2024
- niceboy
Table of Contents
Hive Pods 2 Bluetooth Earphones
User Manual
PACKAGE CONTENTS:
Nice boy HIVE pods 2 headphones Charging box
Backup earphone attachment Micro USB-B cable Manual
PRODUCT DESCRIPTION
INITIAL START-UP AND PAIRING
- Take both headphones out of the charging box and take off the labels protecting the charging pins (3) on the headphones.
- Power on the headphones with one long press of the multifunctional button (3) on both headphones.
- After the LED diode (2) begins to flash both green and red, the headphones are prepared to connect to a Bluetooth device.
- Open the Bluetooth settings on your own device and search for “Nice boy HIVE pods 2” on the list of available devices.
- Once the pairing is successful it will be announced by an audible queue and the LED diode (2) will flash green for a long interval.
Just take the headphones out of the box to connect them again to a previously connected device. The headphones will automatically power on and connect to the device.
POWERING ON AND OFF:
Just take the headphones out of the charging box to power them on or manually
power on the headphones with one long press of both multifunctional buttons.
To power the headphones off, just place them back in their charging box. They
will power off themselves and disconnect from your device. The diode (2) will
shine red once the headphones have been correctly stored in their box. If the
headphones are 100% charged, the diode will stop shining. The headphones can
also be powered off with one long press of both multifunctional buttons
lasting about 6 seconds.
MULTIFUNCTIONAL BUTTON – BASIC CONTROLS
One press of any – play/pause, answer/end call Press the right button twice to
increase the volume by one level Press the left button twice to decrease the
volume by one level
A long press of the right button – next track, reject call Long press the left
button – previous track, reject the call
CHARGING:
To charge the charging box itself, connect the charging cable to the USB port
(5). The diode (4) flashes when charging and stops flashing once the full
battery has been reached.
FACTORY SETTINGS
Place both headphones in the box and hold down both of their multifunctional
buttons until the diode flashes red three times. Once you take the headphones
out of the box, they will have been restored to their factory settings.
SPECIFICATIONS
| BY: | 5.0 (2,4 GHz) |
|---|---|
| Radiofrequency power: | ≤ 2,5mW |
| Supported BT profiles: | HFP,HSP,A2DP,AVRCP |
| Degree of protection: | IPX5 |
| Transmission range: | 10m |
| Frequency: | 20Hz-20kHz |
| Sensitivity: | 94db ± 3dB |
| Speaker: | 6mm |
| Playback time: | up to 6.5 hours |
| Headphone battery capacity: | 70mAh |
| Charging box battery capacity: | 500mAh |
SAFETY INFORMATION
Listening to music at excessive volume can damage your hearing. Do not subject
the equipment to fluids and moisture. Do not expose the device to excessively
high/low temperatures, and do not attempt to disassemble it. Protect the
device from sharp objects and falls from height. Batteries – Improper handling
(prolonged charging, short circuit, breakage by other objects, etc.) may
result in fire, overheating, or battery leakage.
Information on all frequency bands in which the radio equipment operates and
intentionally transmits radio waves as well as the maximum radio frequency
power transmitted in the frequency band in which the radio equipment is
operated is included in the instructions and safety information.
The manual may be downloaded in its electronic form at
www.niceboy.
EU under the support section. RTB Media s.r.o. hereby declares that the type
of radio equipment NICE BOY HIVE PODS 2 complies with Directives 2014/53 / EU,
2014/30 / EU, 2014/35 / EU, and 2011/65 / EU. The full content of the EU
Declaration of Conformity is available on the following websites:
https://niceboy.eu/cs/podpora/prohlaseni-o-shodemM38CtmYvX693lHvvu4CWpk3vJGrvnC
USER INFORMATION FOR DISPOSING OF ELECTRICAL AND ELECTRONIC DEVICES (HOME
USE)
**** This symbol located on a product or in the product’s original documentation means that the used electrical or electronic products may not be disposed of together with the communal waste. In order to dispose of these products correctly, take them to a designated collection site, where they will be accepted for free. By disposing of a product in this way, you are helping to protect precious natural resources and helping to prevent any potential negative impacts on the environment and human health, which could be the result of incorrect waste disposal. You may receive more detailed information from your local authority or the nearest collection site. According to national regulations, fines may also be given out to anyone who disposes of this type of waste incorrectly.
User information for disposing of electrical and electronic devices.
(Business and corporate use)
In order to correctly dispose of electrical and electronic devices for
business and corporate use, refer to the product’s manufacturer or importer.
They will provide you with information regarding all disposal methods and,
according to the date stated on the electrical or electronic device on the
market, they will tell you who is responsible for financing the disposal of
this electrical or electronic device. Information regarding disposal processes
in other countries outside the EU. The symbol displayed above is only valid
for countries within the European Union. For the correct disposal of
electrical and electronic devices request the relevant information from your
local authorities or the device seller.
MANUFACTURER:
RTB media s.r.o., 5. Kvetna 1746/22,
Nusle, 140 00, Czech Republic, ID: 294 16 876,
Made in China.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>