RYOBI PAD01 18 V Speaker with Bluetooth User Manual
- June 5, 2024
- RYOBI
Table of Contents
RYOBI PAD01 18 V Speaker with Bluetooth User Manual
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
READ THESE INSTRUCTIONS. Failure to follow all instructions listed below,
may result in electric shock, fire and/or serious personal injury.
KEEP THESE INSTRUCTIONS HEED ALL WARNINGS FOLLOW ALL INSTRUCTIONS
-
Do not use this apparatus near water.
-
Clean only with dry cloth.
-
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Only use attachments/accessories specified by the manufacturer.
-
Know your product. Read operator’s manual carefully.
Learn its applications and limitations, as well as the specific potential hazards related to this product.
Following this rule will reduce the risk of electric shock, fire, or serious injury. -
Do not operate battery products in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Products create sparks which may ignite the dust or fumes.
ELECTRICAL SAFETY
- A battery operated product with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery.
- Use battery operated product only with specifically designated battery pack. Use of any other batteries may create a risk of fire.
- Use this product only with batteries and chargers listed in tool/appliance/battery pack/charger correlation supplement 987000-432.
PERSONAL SAFETY
- Do not use on a ladder or unstable support. Stable footing on a solid surface enables better control of the product in unexpected situations.
- Do not listen to music or other audio programs while operating machinery. Doing so may cause distractions that could result in serious personal injury.
- This product is capable of producing sound levels that can be dangerous to long-term hearing. Listening to music at high volume for any period of time may cause noise-induced hearing loss. The higher the volume, the less time required before your hearing may be affected.
PRODUCT USE AND CARE
-
When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns, or a fire.
-
Keep the product and its handle dry, clean and free from oil and grease. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum based products, or any strong solvents to clean the speaker. Following this rule will reduce the risk of loss of control and deterioration of the enclosure plastic.
-
Battery products do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery product or when changing accessories. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.
-
Do not place battery products or their batteries near fire or heat. This will reduce the risk of explosion and possibly injury.
-
Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately.
-
Batteries can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product in the presence of open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately.
-
Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water.
If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention. Following this rule will reduce the risk of serious personal injury.- To reduce the risk of personal injury and electric shock, the product should not be played with or placed where small children can reach it.
-
Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
-
Do not modify or attempt to repair a battery pack that has been damaged.
-
Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 265°F may cause explosion.
-
Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
-
Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
SERVICE
-
Product service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury.
-
When servicing a product, use only identical replacement parts. Follow instructions in the
Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury. -
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. -
Save these instructions. Refer to them frequently and use them to instruct others who may use this product.
If you loan someone this product, loan them these instructions also.
BLUETOOTH® LICENSE STATEMENT
The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by TECHTRONIC POWER TOOLS TECHNOLOGY LIMITED is under license. Other trademarks and trade names are those of their respective owners.
FCC COMPLIANCE
NOTE: This device complies with part 15 of the FCC RULES and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: The grantee is not responsible for any changes or modifications not
expressly approved by the party responsible for compliance. Such modifications
could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
SUPPLIER’S DECLARATION OF CONFORMITY
RYOBI 18 VOLT One+™ SPEAKER Model: PAD01
The responsible party declares that this device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Responsible Party: | Techtronics Cordless GP |
---|---|
Address: | 100 Innovation Way, Anderson, SC 29621 |
Telephone: | 864-360-3359 |
Printed Name/Title: | John Collins / Director Regulatory |
Signature:
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL| SIGNAL| MEANING
| DANGER:| Indicates a hazardous situation, which, if not avoided, will
result in death or serious injury.
| WARNING:| Indicates a hazardous situation, which, if not avoided,
could result in death or serious injury.
| CAUTION:| Indicates a hazardous situation, that, if not avoided, may
result in minor or moderate injury.
| NOTICE :| (Without Safety Alert Symbol) Indicates information
considered important, but not related to a potential injury (e.g. messages
relating to property damage).
Some of the following symbols may be used on this product. Please study them
and learn their meaning. Proper inter- pretation of these symbols will allow
you to operate the product better and safer.
SYMBOL| NAME| DESIGNATION/EXPLANATION
| Safety Alert| Indicates a potential personal injury hazard.
| Read Operator’s
Manual| To reduce the risk of injury, user must read and understand opera-
tor’s manual before using this product.
| Eye Protection| Always wear eye
protection with side shields marked to comply with ANSI Z87.1.
| Electric Shock Alert| Indicates uninsulated material within the unit that
may cause electrical shock. Do not remove product covering.
| Wet Conditions Alert| Do not
expose to rain or use in damp locations.
| Wet Conditions Alert| Do not
expose battery, battery compartment, or electronic com- ponents to rain,
water, or liquids. Do not charge battery or expose product to rain or damp
locations.
| Recycle Symbol| This product
uses lithium-ion (Li-ion) batteries. Local, state or federal laws may prohibit
disposal of batteries in ordinary trash. Consult your local waste authority
for information regarding avail- able recycling and/or disposal options.
| Direct Current| Type or a characteristic of current
V| Volts| Voltage
W| Watt| Power
min| Minutes| Time
ASSEMBLY
WARNING:
Do not use this product if it is not completely assembled or if any parts
appear to be missing or damaged. Use of a product that is not properly and
completely assembled or with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create accessories or attachments not
recommended for use with this product. Any such alteration or modification is
misuse and could result in a hazardous condition leading to possible serious
personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
OPERATION
WARNING:
Do not allow familiarity with this product to make you careless. Remember that
a careless fraction of a second is sufficient to inflict serious injury.
WARNING:
Always remove battery pack from the tool when you are assembling parts, making
adjustments, cleaning, or when not in use. Removing battery pack will prevent
accidental starting that could cause serious personal injury.
WARNING:
The speaker is not waterproof. Do not submerge in liquid. Failure to heed this
warning could result in serious personal injury.
NOTICE:
Always refer to the manual for any device recommended for use as an attachment
or accessory. Proper use of any device, when attached to the speaker, is the
sole responsibility of the operator. Improper use may damage the device or the
product.
WARNING:
This speaker is capable of producing sound levels that can be dangerous to
long-term hearing. Listening to music at high volume for any period of time
can cause noise-induced hearing loss. The higher the volume, the less time
required before your hearing could be affected.
APPLICATIONS
You may use this product for the following purposes:
- Charging USB capable devices
- Streaming audio from BLUETOOTH® enabled devices
INSTALLING/REMOVING BATTERY PACK
See Figure 1, page 9.
- A – Battery pack
- B – Latches
- C – Battery port
-
Place the battery pack into the battery port, aligning the rib on the battery pack with the groove in the battery port.
-
Make sure the latches on the battery pack snap into place and battery pack is secured in the speaker before beginning operation.
NOTE: Leaving the battery pack connected for long periods of time will drain the battery pack. Always disconnect battery packs after use. -
Depress the latches to remove the battery pack.
NOTE: Always remove battery pack from speaker when not in use.
NOTE: The battery pack should be recharged after approximately five hours
of use to reduce the possibility of damage. Repeated deep discharge of the
battery may decrease storage capacity and battery life.
For complete charging instructions, see the operator’s manuals for your
battery pack and charger.
CONTROL BUTTONS
See Figure 2, page 9.
- A – On/Off button
- B – PLAY/PAUSE button
- C – Volume buttons
- D – Scan buttons
- E – LED light
- F – USB dedicated charging port
Use the control buttons to turn the speaker on and off, play and pause audio,
disconnect BLUETOOTH® devices, control the volume, and track forward and back.
NOTE: The USB charging port beside the control buttons can be used to
charge small USB devices.
TURNING THE SPEAKER ON AND OFF:
Press the on/off button to turn the speaker on and off.
When the speaker is on, a battery pack is installed, and a BLUETOOTH® enabled
device is paired the LED light will turn solid. If the battery charge is low,
the LED will pulse.
NOTE: When the battery charge is low, the speaker will say “Battery Low”.
PLAYING AND PAUSING AUDIO:
When streaming audio from a BLUETOOTH® enabled device, press the PLAY/PAUSE
button to pause the track and press it again to resume.
DISCONNECTING BLUETOOTH® DEVICES:
Press and hold the PLAY/PAUSE button for three seconds to disconnect a paired
BLUETOOTH® device.
ADJUSTING THE VOLUME:
- To increase the volume, press the VOL + button.
- To decrease the volume, press the VOL – button.
NOTE: Volume for any connected device can be adjusted using the volume control for that device and/or with the VOL + or VOL – buttons on the product.
SCANNING MEDIA TRACKS:
When streaming audio from a BLUETOOTH® enabled device, press the SCAN left or
SCAN right arrow buttons to go to the previous or next track.
NOTE: These controls may not be supported by the BLUETOOTH® device and/or
application you are using.
USING A BLUETOOTH® ENABLED DEVICE (NOT INCLUDED) WITH THE SPEAKER
See Figure 3, page 10.
- A – External device (not included)
- B – LED light
- C – PLAY/PAUSE button
-
Install a battery pack and turn the speaker on.
NOTE: The speaker will say “Power On” and automatically attempt to connect to the last device it was paired to. If no device has been previously paired, the LED will flash. -
Set your device to search/scan for available BLUETOOTH® signals, then select “RYOBI PAD01” from the list. No password or PIN is required for connection.
NOTE: For best results, BLUETOOTH® enabled devices should be within 50 ft. of the speaker and set to search/ scan in order to pair with the speaker. -
When the device has successfully paired with the speaker, the speaker will say “Bluetooth Connected” and the LED will turn solid.
NOTE: If the speaker does not pair with your device, turn the power to the speaker off, wait 5 seconds, then turn the power back on and start the pairing process again.
NOTE: When a device is paired to the speaker, information for connecting to the device is saved in the speaker’s memory. -
To disconnect the BLUETOOTH® enabled device, press and hold the PLAY/PAUSE button for three seconds.
When the device is disconnected, the speaker will say “BLUETOOTH® disconected”, the LED will flash, and the speaker will search for a BLUETOOTH® signal.
NOTE: The speaker will not automatically connect to the device it was just disconnected from.
USING THE USB DEDICATED CHARGING PORT
See Figure 4, page 10.
- A – External device (not included)
- B – USB cable (not included)
- C – USB dedicated charging port (cable not included)
The USB dedicated charging port provides charging power of 5 Volts DC at up to 2.1 Amp for your cell phone, MP3 player, or other USB devices.
NOTICE:
Attempting to charge devices rated more than 2.1 Amp, such as a tablet, could
damage the USB dedicated charging port and/or the device.
-
Connect one end of a USB cable (not provided) to your USB device.
-
Connect the other end of the USB cable (not provided) to the USB dedicated charging port to begin charging the device.
NOTE: The USB dedicated charging port provides power only; it does not provide any data communication capabilities. -
The USB dedicated charging port will continue to function as long as the speaker is on. If the speaker is off, charging will stop.
NOTE: The speaker will turn off in two hours if no audio has been streamed. Turn the speaker on to resume operation.
Product Description
- A – On/Off button
- B – PLAY/PAUSE button
- C – Volume buttons
- D – Scan buttons
- E – USB dedicated charging port
- F – Carrying handle
- G – Battery port
- H – LED light
This equipment complies with the FCC/IC RF radiation exposure limits set forth for an uncontrolled environment. It should be operated with a minimum distance of 20cm between the radiator and any part of your body.
To request service, purchase replacement parts,
locate an Authorized Service Center or obtain Customer or Technical Support:
Visit www.ryobitools.com or call
1-800-525-2579
If any parts or accessories are damaged or missing, do not return this product
to the store.
Call 1-800-525-2579 for immediate
service.
Please obtain your model and serial number from the product data plate.
This product is covered under a 3-year limited Warranty. Proof of purchase is
required.
**MODEL NUMBER* ___
SERIAL NUMBER* ____
Model number on product may have additional letters at the end. These letters designate
manufacturing information and should be provided when calling for service.
RYOBI is a trademark of Ryobi Limited and is used pursuant to a license
granted by Ryobi Limited.
ONE WORLD TECHNOLOGIES, INC.
P.O. Box 1288, Anderson, SC 29622 • Phone
1-800-525-2579
États-Unis, Téléphone 1-800-525-2579 •
USA, Teléfono 1-800-525-2579
www.ryobitools.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>