KAYOBA 011742 Climbing Grips Instruction Manual
- June 5, 2024
- KAYOBA
Table of Contents
KAYOBA 011742 Climbing Grips
SAFETY INSTRUCTIONS
- Read these instructions carefully before assembly and use, and save them for future reference.
- Only for private use. Not for use in public environment.
- Can be indoors and outdoors.
- The product must not be placed over asphalt, concrete or other hard surface.
- Put suitable shock absorbing material under the product if the ground is hard.
- The product must only be used for its intended purpose.
- Give children explicit instructions how to play safely.
- Make sure there are no objects within the area near the product.
WARNING!
- The product must be fitted by an adult.
- Always check before use that the climbing grips are safely fastened to the climbing wall.
- Do not modify or fit the climbing grips in any other way than described in the manual.
- Recommended for 3 year olds and older.
SYMBOLS
- Read the instructions.
- Approved in accordance with the relevant directives.
- Not suitable for children under 3 years of age.
TECHNICAL DATA
- Max load
- 100 kg
DESCRIPTION
PACKAGE CONTENTS
- Grips, 5x.
- 1 -1/4″ hex screws, 10x.
- Flat washer, 10x.
- Weld nut, 10x.
TOOLS TO FIT
- Safety glasses
- Tape measure
- Drill
- Drill 3/8″
- Hex key 1/4 inch
FITTING
- Place the climbing grips, in a uniform pattern, with a gap of 37 to 46 cm between them.
- Mark out with a pen the positioning of the climbing grips on the climbing wall in a systematic pattern that children can climb up to the upper platform. A uniform pattern works best for younger children.
- The parts are intended for mounting on material with a thickness of no more than 25 mm.
- Drill the holes at the marks with a drill with a diameter of 3/8″.
- Fit the climbing grips as shown in the diagram below.
NOTE
The weld nuts may need to be tapped in place in the wood with a hammer.
SHOCK ABSORBING MATERIAL AND DEPTH OF FILL
Read User Manual Online (PDF format)
Loading......