DW C102 Brushless Pump Controller User Manual
- June 5, 2024
- DW
Table of Contents
DW C102 Brushless Pump Controller User Manual
Introduction
The DW Brushless Pump Controller is included with the DW440 and DW650iL fuel pump kits. This controller accepts an 8-22v DC input and creates a digital signal to allow efficient and precise speed and torque control of the pump. The controller is available in 3 configurations: C102 (Dual Speed DW440), C103 (PWM controlled), and C105 (Dual Speed 650iL).
- Optimized for use with the DW brushless pumps
- Variable timing for optimized torque and speed
- Designed for compatibility with voltage boosters
- Bulkhead wiring kit included for in-module retrofit
- Digital thermal protection
Specifications
Weight: 11.8oz (336g)
External Materials: Anodized T6061
36″ wiring harness with flexible high temp silicone insulation and 12awg
power and ground
Voltage Input: 8 volts min, 24v max Digital thermal protection (105C)
Max Current: 40 amp 4pin high current GM-style bulkhead wiring kit
High load switch/trigger suggested for voltages above 18v
Controller Options Available
PN: C102 – Dual Speed – 68% duty cyle with 100% duty cycle ground switch
PN: C103 – PWM input accepts any frequency from 20Hz to 200kHz (open 0%,
ground 100%). Inquire with DW tech support for information on compatibility
with your specific OE or aftermarket fuel pump controller.
PN: C105 – Dual Speed – 55% duty cycle with 100% duty cycle ground
switch.
Dimensions
Wiring:
Red: 12V Key On B+ Power
Black: Chassis Ground/Earth
White: High Speed or PWM Input
THIS PRODUCT MAY BE USED SOLELY ON VEHICLES USED IN SANCTIONED COMPETITION WHICH MAY NEVER BE USED UPON A PUBLIC ROAD OR HIGHWAY, UNLESS PERMITTED BY SPECIFIC REGULATORY EXEMPTION.
Detach Works, LLC 405-217-0701
techsupport@deatschwerks.com
REV 01-03-22
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>