DW DARTWOOD NailDrillPnkUS Portable Electric Nail Drill User Manual
- June 9, 2024
- DW DARTWOOD
Table of Contents
NailDrillPnkUS Portable Electric Nail Drill
User Manual
Portable Electric Nail
Drill
USER MANUAL
NailDrillPnkUS Portable Electric Nail Drill
In the Box
Warning
- Keep away from heating sources while in use, such as portable heaters, radiators, stoves, open flames, etc.
- Keep away from dust, dirt, smoke, chemical/corrosive materials, and water.
- Make sure this device is cleaned and stored safely after use.
Setup
-
Plug one end of the USB cable into the electric nail drill and plug the other end into a USB port.
-
Select your preferred drill bit and push it firmly into the nail drill.
-
Turn the nail drill on/off by flipping the switch on the USB cable (right for forward, left for reverse).
-
Adjust the speed by turning the knob next to the switch.
-
To remove, turn off the device and pull out the drill bit.
Filing Bands
- Select the filing drill bit and push it firmly into the nail drill.
- Select your preferred filing band (fine or coarse) and push it firmly over the top of the filing drill bit.
- To remove, turn off the device and pull off the filing band. Then pull out the drill bit.
Specifications
| Input: | DC 5V 2A |
|---|---|
| Output: | DC 12V 1A |
| Rated voltage: | DC 5V 0.1A |
| No-load speed: | 16,000 – 20,000 RPM |
| Load speed: | 14,000 – 17,500 RPM |
| Power supply: | USB cable |
| Product size: | 4.75 x 0.8 in |
| Product weight: | 2.2 oz |
| Cable length: | 5 ft |
Get More Support
Scan the QR code below or email us at contact@wasserstein- home.comhttps://qrco.de/bcN3bf
www.wasserstein-home.com
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>