Doorsafe 433 MHZ WIFI GONG ALARM User Manual

**Doorsafe 433 MHZ WIFI GONG ALARM User Manual

**

WIFI & 433 MHZ CHIME + ALARM

PAIRING TRANSMITTER & SENSORS

There are 2 ways to pair the transmitter or an alarm sensor with the chime:

Without the app

• Long press the bottom button with the musical note.
  The LED ring will flash purple.

• Now trigger the transmitter or the sensor 1 time. The LED ring flashes green 2 times.

Via the app

• Add chime to the app
• Open the app
• Select: ‘Accessory’
• Select: ‘+’
• Now trigger the transmitter or the sensor 1 time.The LED ring flashes green 2 times.
• Set the type per sensor
• Set the Zone mode

Zone modes:

• Delay: only active after the delay time
• Normal: directly active at ‘Away Arm’
• Home: not active with ‘Home Arm’
• 24 hours: always active (e.g. smokesensor)
• 24 hours silent: always active, silent alarm

ADD TO THE APP

Download the app

Smart Life

or
Tuya Smart

(=same app)

• In the app, select: ‘SENSORS’

• Select: ‘ALARM (WIFI)’

• Enter your own WiFi password

• Press 1 x long on the middle button on the chime with the WiFi symbol: the LED ring then quickly flashes blue

• Then press this button on the chime once more:
  the LED ring slowly flashes blue

• Select in the app: ‘NEXT’

• Select: ‘Blinking slowly – AP mode (left)’

• Let the smartphone connect to the WiFi network that emits the chime. This network starts with: ‘SMARTLIFE-XXXX’

• Now return to the app and the app will pair with the chime.

• If you wish, change product name.

INSTRUCTIONS & SPECIFICATIONS

• Connect the 2 wires coming from the transmitter to the doorbell.
• Switch on the transmitter by sliding the switch to ON.
• The transmitter works on a 3V CR2032 button cell battery. Loosen the 2 screws to be able to replace this battery.
• Plug the chime into a 110 – 220 Volt socket.
• The gong contains a 3.7V 300mAh Lithium battery that can keep the gong working for 5 hours in the event of a power failure.
• The chime can connect to a 2.4 Ghz Wi-Fi 802.11b/g/n network.
• Connect the transmitter and alarm sensors with a 433Mhz wireless signal to the chime.
• Up to 100 sensors and 10 remote controls can be connected to the chime
• The chime has 58 different ringtones.
• The chime has 5 different volume including silent.
• The maximum volume is 85dBA
• Operating temperature: -10 ~ 55 C.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>