DOORsafe DS6667 PRO HD Internet Video Door Intercom with Camera User Guide
- May 15, 2024
- DOORsafe
Table of Contents
DOORsafe DS6667 PRO HD Internet Video Door Intercom with Camera
Specifications
- App: Smart Life (Tuya), iOS & Android App
- Push notifications for visits, motion, theft
- Video Compression / Frame Rate: H264 or H265 / 25fps
- Network Protocol: TCP/IP, RTSP, SIP
- Storage: 32 GB Class 10, FAT32 Micro-SD Card (max. 128 GB)
- Power: 15V 0.8A DC Power
Product Usage Instructions
App Setup:
- Download the Smart Life or Tuya Smart app from the app store.
- Follow the app instructions to set up the device.
- Enable push notifications for visits, motion, and theft alerts.
DVR Settings:
- Turn on the DVR to record movements.
- Set start and end times if needed.
- Adjust motion detector sensitivity to low, normal, or high.
- Enable motion as a screensaver option.
Network Settings:
- Configure local IP, subnet mask, and port settings manually if DHCP is off.
- Enable DHCP for automatic IP, subnet mask, and gateway configuration.
- Choose video compression standard (H264 or H265).
- Manage Wi-Fi connectivity settings.
Other Settings:
Check firmware version.
App Download
Download the app called Smart Life or Tuya Smart (same app) published by
VolcanoTech. Lim. / Tuya Inc.
App Settings
For support visit www.door-safe.de/support
Product code: 2252023
Device Buttons and Connection Points
- Button 9: Power On/Off
- Connection Points:
- LAN (POE; 802.3af or 802.3at)
- Power (15V 0.8A DC)
App Specifications
| App Name | Smart Life (Tuya) |
|---|---|
| Supported OS | iOS & Android |
| Notifications | Push notifications for visits/motion/theft |
| Videocompression / Frame Rate | H264 or H265 / 25fps |
| Network Protocol | TCP/IP, RTSP, SIP |
| Storage | 32 GB Class 10, FAT32 Micro-SD Card (max. 128 GB) |
DVR Settings
Enable DVR to record movements. Set start and end times if desired to only
record movements during specific periods. Adjust motion detector sensitivity
to low, normal, or high. Use the screen saver feature to turn on the screen
when motion is detected.
Network Settings
Local IP, Subnet Mask, and Gateway can be displayed on the screen or set
manually if DHCP is disabled. Enable DHCP to automatically assign IP address,
subnet mask, and gateway. Choose video compression standard between H264 or
H265. WiFi settings allow you to turn off the screen’s WLAN or connect to a
network.
Other Settings
Restart the screen after changes. PUSH-NOTIFICATIONS via APP can be
configured. Display and update the FIRMWARE-VERSION.
Additional References
For further assistance, you can visit http://ipc-eu.ismartlife.me
Please note that due to the complexity and volume of the content in the
provided images, this transcription may not cover every single detail or
instruction. Users should refer to the original source or seek additional
support for comprehensive guidance on the device setup and app configurations.
F AQ
Where can I find support for the app?
Support is available at www.door-safe.de/support.
How do I change the motion detector sensitivity?
In the app settings, you can adjust the sensitivity level to low, normal, or high based on your preference.
What is the maximum storage capacity for the Micro-SD card?
The device supports up to a 128GB Micro-SD card with a Class 10, FAT32 format.
How do I download the app?
You can download Smart Life or Tuya Smart from the Google Play Store or Apple App Store.
What are the apps notifications for?
The app sends push notifications for visits, motion detection, and theft alerts.
How do I configure DVR settings?
You can enable the DVR feature and adjust recording times and motion detector sensitivity within the app.
What are the network settings for?
These settings include Local IP, Subnet Mask, Gateway, and WiFi configuration options.
How can I update the firmware?
The firmware version can be displayed and updated through the app's settings.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>