DOORsafe 240423 Security Camera User Manual

: October 30, 2023
: DOORsafe

Table of Contents

DOORsafe 240423 Security Camera
APP DOWNLOAD
YOUTUBE TUTORIALS
CONNECT WITH WIFI
- CONNECT WITH NETWORK CABLE
SETTINGS
VIEWING IMAGES VIA BROWSER
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

DOORsafe 240423 Security Camera

DS3122 Security Camera

The DS3122 Security Camera can be set up using the Smart Life or Tuya Smart app. The camera can be connected to Wi-Fi or a network cable for internet access. The camera has various settings such as playback, gallery, theme color, private mode, night mode, motion detection, sound detection, siren, smart, cloud, messages, HD / SD, recording settings, siren adjustment, and motion detection alarm settings. The camera can also be added to a screen using DS6669/DS7796.

App Download

Download the Smart Life or Tuya Smart app from the app store.

Connect with Wi-Fi

Connect power to the camera.
Wait for the camera to say “Wait for Wi-Fi config”.
Let your smartphone connect to your own 2.4GHz Wi-Fi network.
In the app, choose “Add Device” or “+” and “Add Device”.
The camera will appear at the top of the app. If not, choose “Camera & Lock” and “Smart Camera (Wi-Fi)”.
At the top right should be a “QR Code”. Check and press “Next”.
Enter your own Wi-Fi password.
Have the camera scan the QR code by pointing the camera at the QR code.
Wait for the camera to say “Connect router”. Press “I heard Prompt”.
Change the name if necessary and press “Done”.
If necessary, insert an SD card into the camera by pointing the camera all the way up, and then the opening for inserting the SD card will appear at the bottom.

Connect with Network Cable

Connect power to the camera.
Wait for the camera to say “Wait for Wi-Fi config”.
Let your smartphone connect to your own 2.4GHz Wi-Fi network.
In the app, choose “Add Device” or “+” and “Add Device”.
The camera will appear at the top of the app. If not, choose “Camera & Lock” and “Smart Camera (Wi-Fi)”.
Top right set to “Cable”. Check and press “Next”.
Wait for the camera to say “Connect router”.
Change the name if necessary and press “Done”.
If necessary, insert an SD card into the camera.

Reset

Turn the camera all the way up.
Press the small reset button for 5 seconds.
The camera says “Reset, camera reboot”.
The camera now says “Wait for Wi-Fi config”.

Adding to Screen DS6669/DS7796

In the app, go to camera settings by choosing the three dots (…) in the top right corner.
Choose ONVIF and turn ONVIF Switch on.
Enter the password and choose Reset Password (password must start with a capital letter and 1 number and contain multiple letters) + view IP address.
On the screen, open settings.
Choose “Add new devices”.
Let the screen search in the network. The screen/internet module must be connected to the same internet router.
Next to the IP address of the camera, press “+”.
Enter User: admin and Password:
Choose Sign in.

Viewing Images via Browser

Scan the QR code or go to IPC-eu. smart life. me.
Open the app and choose “+” and “Scan QR code”.
In the app, go to camera settings by choosing the three dots (…) in the top right corner.

APP DOWNLOAD

Download the app:

YOUTUBE TUTORIALS

DOORsafe-240423-Security-Camera-
FIG-2

CONNECT WITH WIFI

Connect power to the camera
The camera now says: “wait for Wi-Fi config”
Let the smartphone connect to its own 2.4GHz. WiFi network
Choose in the app: ‘Add Device’ or ‘+’ and ‘Add Device’
The camera will appear at the top of the app
If not, choose ‘Camera & Lock’ & “Smart Camera (Wi-Fi)”
At the top right should be the ‘QR Code’
Check and press ‘Next’
Enter your own Wi-Fi password
Have the camera scan the QR code by pointing the camera at the QR code
Wait for the camera to say: ‘Connect router’
Press: I heard Prompt
Change the name if necessary & press ‘Done’
If necessary, insert the SD card into the camera by pointing the camera all the way up, and then the opening for inserting the SD card will appear at the bottom.

CONNECT WITH NETWORK CABLE

Connect power to camera
Camera now says: “wait for Wi-Fi config”
Let smartphone connect to own 2.4GHz. WiFi network
Choose in the app: ‘Add Device’ or ‘+’ and ‘Add Device’
The camera will appear at the top of the app
If not, choose ‘Camera & Lock’ & “Smart Camera (Wi-Fi)”
Top right set to ‘Cable’
Check and press ‘Next’
Wait for the camera to say: ‘Connect router’
Change the name if necessary & press ‘Done’
If necessary, insert an SD card into the camera

RESET

Turn the camera all the way up
Press the small reset button for 5 seconds
The camera says: ‘Reset, camera reboot’
The camera now says : “wait for Wi-Fi config

SETTINGS

PLAYBACK – view images stored on SD card back in the app
GALLERY – view images stored on the smartphone
THEME COLOR – choose light or dark mode
PRIVATE MODE – turn off camera
NIGHT MODE – manually switch between night vision via infrared or white light LEDs
MOTION DETECTION – let the app give a push notification when motion is detected
SOUND DETECTION – let the app give a push notification when sound is heard
SIREN – let the camera speaker sound a siren, volume & duration can be set
SMART – imagine a scenario
CLOUD – option: save images to the cloud
MESSAGES – view a log
HD / SD – switch between image quality

OTHER SETTINGS:

Recording settings – non-stop recordings or only movements, also based on a schedule
Siren Adjustment – set siren duration & volume
Motion detection alarm settings – set sensitivity, human body filtering & activity area/ surveillance area

ADD TO SCREEN DS6669/DS7796

Go to the camera settings in the app by choosing 3 dots … at the top right
Choose ONVIF and enable ONVIF Switch
Enter the password & choose Reset Password (password must start with a capital letter and contain 1 number and multiple letters) + View the IP address
On-screen open settings
Select: Add new devices
Let screen search in the network. The screen/internet module must therefore be connected to the same internet router.
Next to the IP address of the camera press + →
Enter: User: admin
Password: → Choose LOGIN