DOORsafe 6700 PRO Internet Video Doorbell with Camera and Intercom User Guide
- May 15, 2024
- DOORsafe
Table of Contents
DOORsafe 6700 PRO Internet Video Doorbell with Camera and Intercom
Product Information
Specifications:
- Power Supply: GND/DC24V (24-36V 0.8A DC)
- Power Consumption: 24-36V DC 0.8A (Consumption: 12W Standby: 5W)
- Storage: 32GB Class 10, FAT32 Micro-SD card (up to 128GB) & NAS
- App: Smart Life (Tuya) or Tuya Smart Push Notification for Visitors/Movement/Theft
- Network Protocol: TCP/IP, RTSP, SIP PLC/BUS Rate: Max. 600Mbps
Product Usage Instructions
DVR Settings:
Turn on the DVR to record movements. Set start and end times if needed.
Adjust motion detector sensitivity to low, normal, or high. Enable motion as a
screensaver option.
Network Settings:
View or manually set the IP address, subnet mask, and gateway. Activate
DHCP for automatic IP address assignment. Choose H264 or H265 for video
compression. Turn off or connect the screen to a Wi-Fi network. Restart the
screen as needed.
Other Settings:
Check the firmware version.
FAQ
Q: How do I turn on the motion detection alarm?
A: Use the ‘Motion Detection Alarm Switch’ to enable the feature.
Q: What is the maximum capacity for the Micro-SD card?
A: The device supports up to 128GB Micro-SD card with FAT32 format.
Q: Which app should I download for this device?
A: You can download either Smart Life or Tuya Smart app, both from
VolcanoTech Lim. / Tuya Inc.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>