renkforce 2497597 5 in 1 USB-C Hub Instruction Manual
- June 3, 2024
- renkforce
Table of Contents
renkforce 2497597 5 in 1 USB-C Hub
Intended use
The product is a USB-C™ hub with 3x USB-A ports, and micro-SD/SD card reader.
Features include:
- Individual ON/OFF button for USB ports and card readers.
- Plug and play support.
- The product is intended for indoor use only. Do not use it outdoors.
- Contact with moisture must be avoided under all circumstances.
- If you use the product for purposes other than those described, the product may be damaged. Improper use can result in short circuits, fires, or other hazards.
- The product complies with the statutory national and European requirements.
- For safety and approval purposes, you must not rebuild and/or modify the product.
- Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
Delivery contents
- Product
- Operating instructions
Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Fol-low the instructions on the website.
Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
Safety instructions
Read the operating instructions carefully and especially observe the safety informa-tion. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
-
General
- The product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. This may become dangerous playing mater-ial for children.
- If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
- Maintenance, modifications and repairs must only be completed by a technician or an authorised re-pair centre.
-
Handling
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product -
Operating environment
- Do not place the product under any mechanical stress.
- Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
- Protect the product from high humidity and moisture.
- Protect the product from direct sunlight.
- Do not switch the product on after it has been taken from a cold to a warm environment. The con-densation that forms might destroy the product. Allow the product to reach room temperature before you use it.
-
Operation
- Consult an expert when in doubt about the operation, safety or connection of the product.
- If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guar-anteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
-
Connected devices
Also observe the safety and operating instructions of any other devices which are connected to the product.
Operation
- Connect the product to an available USB-CTM port on your computer.
- Connect a peripheral to a USB-A port(s) or insert a micro-SD/SD card into the reader.
- To avoid unnecessary power consumption, switch each port ON/OFF using the corresponding switch.
Notes:
MicroUSB port information:
- This port does not transmit data.
- When more than one device is connected the USB-A ports, the power will be divided among the ports.
- To regulate the output, connect an additional power supply to the Micro-USB input on the hub.
- A microUSB power cable is not included within scope of delivery.
Cleaning and care
Important:
- Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage the housing and can cause the product to malfunction.
- Do not immerse the product in water.
- Disconnect the product from the power supply.
- Clean the product with a dry, fibre-free cloth.
Disposal
This symbol must appear on any electrical and electronic equipment placed on the EU mar-ket. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life. Owners of WEEE shall dispose of it separately from unsorted municipal waste. Spent batter-ies and accumulators, which are not enclosed by the WEEE, as well as lamps that can be re-moved from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste. Conrad provides the following return options free of charge (more details on our website):
- in our Conrad offices
- at the Conrad collection points
- at the collection points of public waste management authorities or the collection points set up by man-ufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.
Technical data
- Input ………………………………………………. MicroUSB: 5 V/DC, 1 A max. USB-CTM: 5 V/DC, 3 A max.
- USB-A …………………………………………….. Data: USB 3.2 Gen 1×1, max. 5 Gbit/s Power (total): 5 V/DC 2 A, 10 W max.
- Card reader …………………………………….. microSD/SD
- Operating conditions …………………………. -10 to +60 °C, 20 – 80 % RH (non-condensing)
- Storage conditions. …………………………… -20 to +80 °C, 10 – 90 % RH (non-condensing)
- Dimensions (L x W x H) …………………….. 145 x 106.5 x 44.3 mm
- Weight ……………………………………………. 41.6 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g.
photocopying, microfilming or the capture in electronic data processing
systems) requires prior written approval from the editor. Reprinting, also in
part, is prohibited. This publication reflects the technical status at the
time of printing.
Copyright by Conrad Electronic SE.
*2497597_V1_0422_dh_mh_en 502057355-2 I1/O1 en
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>