Pyle PLSPOOL16 Portable Wireless Speaker Colorful Lights User Manual

: June 5, 2024
: Pyle

Table of Contents

Features:
Technical Specs:
BUTTON FUNCTION:
Documents / Resources

PLSPOOL16
Portable Wireless Speaker with Colorful Lights
Floating Pool Speaker IP68
Waterproof Speaker (Blue) User Manual

Pyle PLSPOOL16 Portable Wireless Speaker Colorful Lights -
fig

Features:

Multi-Colors Lights & Seven Flashing Modes
4 Diﬀerent LED Lights and 7 Patterns of Flashing Modes
Amazing Sound Quality & Louder Volume
With High-fidelity Stereo Sound and Passive Radiators
Large Battery Capacity & Handsfree Phone Call
Built-in Microphone for Personal Handsfree Speakerphone
IP68 Waterproof Rating, Shockproof, Dustproof, Scratchproof Speaker
Hi-Fi Loud Stereo Sound
Long Play Time with Color Changing Light
Built-in Rechargeable Battery

Technical Specs:

Power: 5W
Construction Material: PC
Frequency Response: 2400MHz-2480MHz
Battery Life: Up to 30,000+ Hours
PA Speaker Battery Type: 3.7V Li-ion – 2000mAh
Working Hours: 5-7 Hours
Product Dimension: 4.7” x 4.7” x 3.5” -inches

BUTTON FUNCTION:

A. Multifunction Button

Press and hold for 3 seconds to power ON, and press and hold again for 3 seconds to power OFF.
When in playing music, short press this button to pause music, and press again to continue playing music.
When an incoming call, press the button to answer the phone, and double press the button to refuse the call.

B. “Volume- and Previous” Button
Short press the button to play the previous track, and press and hold the button to reduce the volume.
C. “Volume+ and Next” Button
Short press the button to play the next track, and press and hold the button to increase the volume.
D. Light mode Button
Short press to select different flashing modes and turn ON/turn OFF mode Seven light modes:

Music flash mode – flash with the music beat;
One color mode – Red;
One color mode – Green;
One color mode – Blue;
Auto flash mode – several colors mix, slow flash and fast flash mix.
Slow flash mode – smoothly change the light;
Fast flash mode – quickly change the light;
Turn oﬀ the LED light;
Press and hold the light button for 8 seconds to restore factory settings.

1. WIRELESS BT PAIRING SETTINGS
Press and hold the multifunction button for 3 seconds to power ON. Wait the blue light to flash, open the BT mode on your smartphone and select “PYLE” to pair the device.
It’s now paired. You can broadcast your music! If not, start again or relaunch the PYLE.
3. CHARGING
Take the USB included. Connect the USB port to a 5V USB outlet and the DC jack to the PLSPOOL16. During the charging, the LED indicator will flash slowly in red.
When the battery is full the LED indicator is green.
Tips: It will auto connect the last paired device in 8 seconds after power on, if fail it will enter the pairing state. It shall enter into the sleep state without playing after 20 minutes. If over 60 minutes, it automatically shut down.
Note: Use the included cable and respect the voltage!

pyleUSA.com
Questions? Comments?
We are here to help!
Phone: (1)718-535-1800
Email:support@pyleusa.com
www.SereneLife.com

Documents / Resources

| Pyle PLSPOOL16 Portable Wireless Speaker Colorful Lights [pdf] User Manual
PLSPOOL16 Portable Wireless Speaker Colorful Lights, Portable Wireless Speaker Colorful Lights, Speaker Colorful Lights, Colorful Lights
---|---