Zeapa HBT600-3 Plug-In Wireless Doorbell User Guide

Zeapa HBT600-3 Plug-In Wireless Doorbell

Features

•  Modern and stylish design
•  The piano button of the emitter brings good touch feels.
•  36 selected chimes
•  4-level adjustable sound volume.
•  Super long transmission range.
•  Easy to install and use
•  Lower power consump on

What You Should Know Before Installaion

1.  The emitter supplied with this kit is already paired with receivers and set to default tune “Dingdong”, also can press Chimes Button of receivers ll your favorite chimes selected.
2.  It is not advisable to mount the emitter onto METAL SURFACES, as the material can BLOCK RF signals between emitter and receiver.
3.  We recommend to use the s cky pad provided as first op on, using screws as second op on.
4.  Transmission range will decrease if battery in emitter is in a low volume status.
5.  It is not advisable to mount the emitter outdoor directly WITHOUT any SHELTER which could accelerate aging of key electric components.

Installation Methods

1. Test the doorbell working status and transmission range first before installation, battery inside emitter already.
2. Plug receivers into a standard outlet of the room you offen stay, then it will work.
3. Install the emitter, there are two options for choosing.

Option-1, Double-sided adhesive pad

1.  Choose a flat area that you intend to install, then use dry cloth to clean.
2.  tear off one side film of pad and sick to the emitter, then the other side and sick to the area that you intend to put on, pressing 10 secs.

Option-2, Screws/Screws and Anchors
Please prepare an electric drill and screwdriver before installation.

1.  Mark the hole area that you intend to install.
2.  Drill two holes on the marked area, then insert anchors into the hole, or use screws directly on the surface, such as wood surface etc.
3.  Use a flat screwdriver to PRY open the bracket or back cover of the emitter.
4.  Screw up the bracket or back of the emitter.

Caution:
Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: ( 1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device Aas been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

After-sales Support
Thanks for your choosing our products, we will provide 24*7hr on-time service for you, if yot have any query or good suggestion, welcome to contact us via below information. Email: customer.service@wharton- pro.com Your satisfaction is our target, hope our product s and service can get yo ur satisfaction. Welcome to give us feedback after you receive our products within 1-4 weeks, tell us what you think. of and your suggestion, well select the best suggestion every month, and offer some gift:. Appreciate your support and understanding! Best Regards Greetings from Zeapa Store

Troubleshooting

1. No sound
2.  Check whet her emitter battery is power enough or not, replace a new battery if necessary.
3.  Receiver installed not properly, plugin and out for several times, or try other outlet.
4.  Receiver is out of range to receive signal from emitter.
5.  Check sound volume button whether it is on the lowest level.
6. Transmission range reduced cause
7.  Metal structures, including UPVC door frames, can reduce the range of transmission. Avoid mounting on the area that emitter and receiver are Isolated separately by metal structures.
8.  Other sources give out radio waves to lessen the receiver to receive signal.
9.  Signal would lessen after cross Walls and ceilings; signal transmission range would reduce accordingly.
10.  Weak battery would reduce transmission range as well, replace the battery at Interval 12 months

Specifications

Made in China
WARNING ; Don’t dismantle this product without support from professional electrician on site.

FCC WARNING

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>