ASCO 300 Power Transfer Switch Battle Card User Manual
- June 5, 2024
- ASCO
Table of Contents
ASCO 300 Power Transfer Switch Battle Card
Standard designs for commercial and light industrial facilities that are
simple to procure, install, and commission.
Value Prop:
ASCO Transfer Switches make backup power possible. They enhance power
availability by transferring electrical loads to alternate sources of power.
From simple backup solutions to mission-critical facilities, transfer switches
connect backup power to enhance safety and sustain operations.
Questions to Ask:
- Do you have a Generator?
- If so, do you have an existing switch?
- How old it is?
- Can we look at it?
- If yes, and in need of a Transfer Switch, ask the following:
Service Entrance, Non-Service Entrance, amperage, voltage, enclosure type, number of switched poles, open, closed or delayed transition, start up required?
Typical Applications
-
Reliably transfer loads between two or more power sources
-
Service and maintain equipment without disrupting power to loads
-
Reduce equipment space requirements
-
Transfer loads without impacting downstream equipment
-
Add capability for a “backup-to-the-backup”
-
Outpatient Healthcare Facilities
-
Small & Midsize Businesses
-
Light Industrial Applications
-
Integrated & Stand-Alone Quick Connects
Transfer switch models differ by type of operation
Automatic
Automatic models switch loads to emergency power and back again whenever
outages occur, without human intervention.
Non-Automatic
Non-Automatic models use operator initiated, local or remote electrical
controls to transfer loads on command.
Manual
The simplest type, manual transfer switches require a person to operate a
mechanical switching mechanism
Transfer Switch Components
-
Enclosure
Available in a range of UL-rated types, rugged enclosures protect equipment and ensure promote reliability for a variety of indoor and outdoor environments.
-
Transfer Mechanism
Electrically operated and mechanically held, solenoid-powered operating mechanisms reliably transfer load quickly for even the most demanding applications -
Controller
Electronic controller stores operating criteria, senses electrical conditions, executes trans-fer sequences, and tracks operational data. -
Communications & Metering
From simple indicators to remote annunciators, from real-time monitoring and control to interfacing building automation systems, communication features increase usability and system reliability.
| Accessories | Part No. | Description |
|---|---|---|
| 1UP | 935149 | Provides internal ride-through power for the controller to ensure |
consistent communication while awaiting generator start up
18RX| 935148| Provides dry contact outputs to signal the acceptability of each
source
11BE| 935147| Bundle provides RS-485 Serial Modbus COMM’s, Advanced Engineer
Exerciser Scheduler, 300 Entry Historical Event Log, Alarm Output
72EE| 948551| Provides Ethernet communication module that allows for remote
monitoring via a built webpage, Modbus TCP, SNMP, or email alerts
44G| K613127-003| Provides internally powered strip heater to prevent
condensation 208V – 399V
44G| K613127-002| Provides internally powered strip heater to prevent
condensation 400V – 600V
125A| 125A| Request at bid – Seismic Rating
135L| 135L – Power Meter 5210| Request at bid – 5210 Power Meter added to load
side of switch which displays current, power, energy, and THD
www.ascopower.com
customercare@ascopower.com
1-800-800-ASCO (2726) © 2022 Publication 2064 R1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>