Works Bell 0210622 Paddle Shifter Neo Installation Guide
- June 6, 2024
- Works Bell
Table of Contents
Works Bell 0210622 Paddle Shifter Neo
Specifications :
- Model Number: 0210622
- Product Name: Paddle Shifter KIT NEO
Product Usage Instructions
Before Installation:
Before starting the installation process, please carefully read through the
entire user manual provided with the Paddle Shifter KIT NEO. Make sure all the
components are included in the package and in good condition.
Installation Steps:
- Identify the correct placement for the paddle shifters on your steering wheel.
- Follow the step-by-step instructions provided in the manual to install the paddle shifters securely.
- Ensure all connections are properly made and tighten any screws or bolts as needed.
- Test the paddle shifters to ensure they are functioning correctly before using them while driving.
Troubleshooting and Support:
If you encounter any issues during the installation process or while using
the Paddle Shifter KIT NEO, refer to the troubleshooting section in the
manual. If you are unable to resolve the issue, please contact our customer
support for assistance.
Contact Information:
If you require further assistance or need to return the product, please
reach out to the store where the product was originally purchased for support.
FAQ:
-
Q: Can I install the Paddle Shifter KIT NEO on any type of steering wheel?
A: The Paddle Shifter KIT NEO is designed to be compatible with most standard steering wheels. However, it is recommended to check the compatibility of your specific steering wheel model before installation. -
Q: How do I adjust the sensitivity of the paddle shifters?
A: The sensitivity of the paddle shifters can usually be adjusted through the settings on your vehicle’s dashboard or through a control module included in the kit. Refer to the user manual for detailed instructions on adjusting sensitivity.
Model Number: 0210622
Thank you for purchasing the Paddle Shifter KIT NEO. Please follow the
instructions carefully to ensure proper installation and operation.
Before Installation
Pre-Installation Check:
- Ensure your vehicle is compatible with the Paddle Shifter KIT NEO. It cannot be used on cars that have a sports shift function without a switch on the genuine steering wheel.
- Read through the entire installation manual carefully.
- Gather all necessary tools and ensure you have a clear workspace.
Safety Precautions:
- Installation should be performed by a professional or at a certified car shop.
- Handle all parts, especially those related to the airbag system, with extreme care to avoid damage or unintended deployment.
Installation Steps
- Step 1: Prepare for Installation
- Sports Shift Mode: If your car has a sports shift ON/OFF switch, ensure it is accessible before starting.
- Remove Existing Steering Wheel: Follow the vehicle manufacturer’s manual to remove the existing steering wheel and airbag module. Use caution to prevent airbag activation.
- Step 2: Install Paddle Shifter
- Mounting the Paddle NEO Body:
- Insert the ground ring between the Paddle NEO body and the steering column boss.
- Connect the ground wire as indicated by the terminal count on the horn button.
- Attach the paddle plate with the pointed end facing up. Adjust its position according to the steering handle diameter and personal preference.
- Connection Details:
- Connect the intermediate coupler from the paddle.
- Use the provided vinyl tape to secure any loose connectors to prevent poor contact and avoid the SRS warning light issues.
- Sticker Application:
- Apply the included + (UP/Right Paddle) and – (DOWN/Left Paddle) stickers in your desired location for ease of use.
- Step 3: Wiring and Electronics
- Airbag and SRS System Handling:
- If using a dummy harness, attach it to the airbag coupler without polarity concern. Wrap any non-retractable harnesses around the outer circumference of the boss body, securing with tape.
- Process and secure all wiring inside the boss cover to prevent noise and interference.
- Step 4: Final Setup
- Assembly:
- Ensure all connections are tight and secure.
- Attach the handle using the provided screws with the TOP mark of the boss facing up.
- Insert the paddle unit between the steering wheel and boss, tightening with the specified torque (3N m).
- Step 5: Post-Installation Checks
- Functional Testing:
- Test the turn signal return, horn operation, and paddle response.
- Ensure there are no loose parts and that the airbag warning light behaves as expected (consult your dealer if it flashes or remains lit).
- Step 6: Safety and Maintenance
- Regular Checks and Maintenance:
- Regularly check the set screw of the paddle plate to ensure it hasn’t loosened.
- Monitor and manage the transmission fluid levels to prolong the life of the A/T system.
- Avoid simultaneous operation of UP and DOWN paddles to prevent potential vehicle circuit or transmission failures.
Troubleshooting and Support
Unexpected Issues:
- In case of any operational issues post-installation, refer back to this manual and check all connections.
- Contact your dealer for specific troubleshooting related to the airbag system or transmission.
Contact Information:
- Works Bell Co., Ltd.
- Address: 8507 Tamagawa, Chino City, Nagano Prefecture 391-0011
- Phone: 0266-79-3761
- Email: [email protected]
- Website: http://www.worksbell.co.jp
For further assistance or if you wish to return the product, please contact the store where the product was purchased.