STANLEY GD50132RF Ground Rod Driver Instruction Manual
- October 30, 2023
- Stanley
Table of Contents
STANLEY GD50132RF Ground Rod Driver
GD50 Product Information
The GD50 is a product that includes an inline valve assembly, handlebar, capscrew, o-ring plug-male, orifice plug, charge valve, lock nut, top plate, set screw, diaphragm, valve spool, spring, accumulator valve block, selector screw, back-up ring, porting block, hose assembly, automatic valve body, retaining ring, seal cap, valve button, adaptor, male coupler body, female coupler body, automatic valve, push pin, roll pin, name tag, flow sleeve tube, flow sleeve, piston, wiper ring, back-up washer, cup seal, side rod, adaptor block assembly, upper anvil stop, spring, rod anvil (5/8 inch rods or 3/4 to 1-inch rods), anvil guide, guide housing, valve body assembly, o-ring, and bumper. The product is available in two models – GD50132RF for 1/2 and 5/8-inch rods and GD50133RF for 3/4 and 1-inch rods. A seal kit is available for the GD50 Rapid Fire Model (04595) and all other GD50 models (13552).
GD50 Product Usage Instructions
Before using the GD50 inline valve assembly, make sure you have the correct model number. Verify the correct model number before ordering. If you need to order individual parts for the old inline valve, refer to the parts illustration and order accordingly. However, if you need to replace the entire inline valve assembly, you must order the new inline valve assembly P/N72264. The new inline valve assembly includes items 16, 22 through 26, 49, 50, 53, and 54. The GD50 product works by using the handlebar to control the valve spool, which in turn controls the flow of fluid through the valve body assembly. The valve body assembly includes an automatic valve and a charge valve, which allow for efficient and smooth operation. Refer to the user manual for further instructions on how to install and use the GD50 product.
PARTS ILLUSTRATION
GD50 PARTS ILLUSTRATION
NOTE: IF YOUR INLINE VALVE DOES NOT CONTAIN THIS PART, (SEAL CAP) ORDER INDIVIDUAL PARTS FROM OLD INLINE VALVE.
GD50 PARTS LIST
ITEM
| PART
NO.
| ****
QTY
| ****
DESCRIPTION
---|---|---|---
1| 35770| 2| HANDLE BAR
2| 370351| 4| CAPSCREW
3| 07493| 1| O-RING PLUG-MALE
4| 05243| 1| ORIFICE PLUG (INCL W/ ITEM 13)
5| 20499| 1| CHARGE VALVE
6| 04374| 4| LOCK NUT
7| 15190| 1| TOP PLATE
8| 00720| 4| SET SCREW
9| 07479| 1| DIAPHRAGM
10| 00293| 1| O-RING
11| 15188| 1| VALVE SPOOL
12| 04058| 1| SPRING
13| 11588| 1| ACCUMULATOR VALVE BLOCK
16| 10536| 1| SELECTOR SCREW
17| 04381| 2| BACK-UP RING
18| 04379| 2| O-RING
19| 04378| 1| PORTING BLOCK
20| 35784| 2| HOSE ASSY
21| 07480| 1| AUTOMATIC VALVE BODY
22| 16070| 1| RETAINING RING
23| 56749| 2| SEAL CAP (NEW INLINE VALVE)
23A| 01003| 2| VALVE BUTTON (OLD INLINE VALVE)
24| 07224| 2| BACK-UP RING (NEW INLINE VALVE)
24A| 13568| 2| BACK-UP RING (OLD INLINE VALVE)
25| 07626| 2| O-RING (NEW INLINE VALVE)
25A| 13567| 2| O-RING (OLD INLINE VALVE)
26| 67008| 1| VALVE SPOOL (NEW INLINE VALVE)
26A| 38631| 1| VALVE SPOOL (OLD INLINE VALVE)
27| 00936| 2| ADAPTOR
28| 03973| 1| MALE COUPLER BODY
29| 03972| 1| FEMALE COUPLER BODY
30| 04382| 1| AUTOMATIC VALVE
31| 04571| 2| PUSH PIN
32| 02900| 2| ROLL PIN
33| 37425| 1| NAME TAG
34| 04383| 1| FLOW SLEEVE TUBE
35| 04384| 1| FLOW SLEEVE
36| 04605| 4| PUSH PIN
37| 04954| 1| PISTON
38| 02022| 1| O-RING
39| 04387| 1| WIPER RING
40| 04780| 1| BACK-UP WASHER
41| 04386| 1| CUP SEAL
42| 12139| 4| SIDE ROD
43| 43527| 1| ADAPTOR BLOCK
ITEM
| PART
NO.
|
QTY
|
DESCRIPTION
---|---|---|---
44| 72592| 1| ADAPTOR BLOCK ASSY (INCLUDES UPPER ANVIL STOP)
45| 12146| 1| SPRING
46| 36106| 1| ROD ANVIL, 5/8 INCH RODS (MODEL GD50132RF)
| 35751| 1| ROD ANVIL, 3/4 TO 1 IN. RODS (MODEL GD50133RF)
47| 65812| 1| ANVIL GUIDE
48| 35753| 1| GUIDE HOUSING
49| 67007| 1| VALVE BODY ASSY. (NEW INLINE VALVE)
49A| 38629| 1| VALVE BODY ASSY. (OLD INLINE VALVE)
50| 00026| 1| O-RING
51| 65813| 1| BUMPER
52| 371071| 2| WASHER
53| 01604| 2| O-RING (NEW INLINE VALVE)
54| 56747| 2| SEAL WIPER (NEW INLINE VALVE)
55| 00856| 2| ADAPTOR
56| 72264| 1| INLINE VALVE ASSEMBLY
- Model GD50132RF—1/2 and 5/8 inch rods.
- Model GD50133RF—3/4 and 1-inch rods.
Verify the correct model number before ordering. Seal Kit
- GD50 Rapid Fire Model—04595
- All Other GD50 Models—13552
Read Before Ordering Inline Valve Parts
Inline Valve Assembly (OC-CC) – 72264 Includes Items (16, 22 Thur 26, 49, 50,
53, and 54) The inline valve changed around June 2011. To determine if you
have the old or new inline valve, see the parts illustration.
Note: Individual parts are still available for the older inline valve but
if replacing the entire inline valve assy, you must order the new inline valve
assy P/N- 72264.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>