tuya AB06B Outdoor Siren with Solar User Guide
- June 5, 2024
- Tuya
Table of Contents
Powered By
Intelligence Inside
USER GUIDE
Outdoor Siren with Solar
ZIGBEE
Product Configuration
Installation Method
- Open the battery compartment and take out the insulating sheet at the battery end
- Charge through the Type-C port and activate the device
- Follow the instructions to connect the device to the network and connect to the APP
- Cover the battery compartment, and use the accessory screwdriver to screw on the screws
- Use accessory screws to x the back plate at the installation position
- Align the hanging hole of the Outdoor siren with the back plate and hang it
- Note:
① When installing, please align the solar panel with the position where the sun shines for the longest time.
② If there is no sun for two consecutive months, remove the device and charge it through USB.
Type-C power-on activation
1. Backplate installation
- Mark the position of the backplate holes on the wall and drilled
- Align the backplate holes with the wall holes and fix with screws
- Finish!
2. Device installation
- Align the racks on the backplate with the device mounting holes then fix it
- Finish!
3.Type-C USB Charging
- Remove the alarm from the installation
- Remove the screws of the battery compartment and open the hatch cover
- Use 5V/1A power supply to charge the device, and the charging time is 9 hours
Specifications
Power: 5V/1A Type-C USB Powered
Battery type: 18650 rechargeable batter
Wireless protocol: Zigbee 3.0
Zigbee standard: Zigbee IEEE 802.15.4
Wireless range: 45m(Max)
Standby current: 2.5mA
Type of alarm ringtone: 3
Maximum alarm sound:1M-100dB
Waterproof rate: IPX5
Working temperature: -10℃~60℃(14℉~140℉)
Working humidity: 1% ~ 95%RH(Non condensation)
Size: 200mm x 150mm x 65.87mm
Solar panel size: 132mm X 62mm
Minimum light value for charging: 10000Lux
LED State
Device Status | LED State |
---|---|
Configure network mode | Indicator light flashes 2 times in 1s |
Indicator light color | Blue |
Reset | Long press the rest bottom for 6s |
Get Started
1. Download APP
Download the “Smart life” app from APP Store or Google Play to your mobile.
http://smartapp.tuya.com/smartlife
2. Register and Login
2-1 Launch the “Smart life” app.
2-2 To register,enter your mobile phone number or email address,create a
password ,then login to the app.
2-3 Login if you have an account already.
3. Add Devices
3-1. Add ZigBee Gateway
Configure to Tuya gateway, please follow the gateway manual (note the
difference between wired gateway and wireless gateway)
3-2. Add Sub-devices(Outdoor Siren)
Please confirm that the device is in the standby state before configuration.
If it is not in the standby state, you need to press and hold the reset button
for 6 seconds, and the device indicator light will flash and enter the standby
state.
Functions and Settings
-
Alarm State Display
Click to remove the alarm when it is reported. -
Record
you can view the alarm history record of the device. -
Smart
Setting smart linkage -
More Setting
① Charge state: Normal state/Charging
② Set the alarm duration; setting range 1-60min
③ Alarm switch; turn on/off the alarm
④ Battery level display
⑤ Tamper alarm; display the current tamper alarm status
⑥ Alarm ringtone; there are 3 alarm sounds to choose
⑦ Tamper alarm ;turn on/off the tamper alarm, and the tamper will not be triggered after closing
⑧ Alarm type
⑨ Alarm off; turn on/off the alarm, you will not receive a push after closing, and the device function will not be turned off
Other Function
-
Share device
-
Push Notification Setting
If it is disabled, all devices in the APP will not receive notification, but message records will not be affected. -
Remove Device
Wipe data; Delete the device through the APP and add the device again to clear the historical record
Due to the app update, the above interface is for reference only
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>