REFLEX ACTIVE Series 04 Bluetooth Stainless Steel Smart Watch Instructions
- June 4, 2024
- REFLEX ACTIVE
Table of Contents
Series D4 Instructions
Thank you for choosing reflex Active!
Please read these instructions carefully, we’ll have you up & running in no
time. There’s lots of advice on our website to help you get the very best from
your watch, including video guides – head to our SUPPORT section.
HOW TO CHARGE
- Line up the 2 pins to the charging spots on the back of the watch case.
- The pins are magnetic and will secure the charger in place.
- Plug in the USB cable to a power source. Once connected, the charging icon will appear on the screen.
- Please charge the band when it displays low battery. 5. A 2-hour charge time is sufficient to fully charge your smartwatch. Please ensure you do not exceed a 2-hour charge period.
OPERATION INTRODUCTION
- To switch on, press and hold the touch key until the display illuminates.
- To switch off the watch, press the touch key repeatedly until the ‘more’ icon shows on the display and then long press to enter in ‘Power off: long press the touch key again.
- You can press the touch key, or turn on gesture control in advanced settings of the REFLEX ACTIVE app. and raise your hand to illuminate the screen.
DOWNLOADING THE REFLEX ACTIVE APP
|
---|---
https://apps.apple.com/us/app/reflexactive/id1487278250|
https://apps.apple.com/us/app/reflexactive/id1487278250
To download our app, search for the REFLEX ACTIVE app. or scan the appropriate QR code for installation. Use your smartphone camera or QR code reader app.
COMPATIBILITY
The REFLEX ACTIVE app will work on the following smartphones:
- Android (version 4.4 and above)
- Apple IOS (version 8.0 and above) Please ensure the app is the latest version and have Bluetooth 5.0
CONNECTING BAND TO MOBILE PHONE
- Enable Bluetooth on your smartphone.
- Open the Reflex Active App. on your smartphone.
- Review and accept privacy policy.
- Set your profile following the steps presented.
- Set your goals following the steps presented.
- To connect your watch, tap the green icon & select your watch from the list.
- Tap OK to allow notifications to appear on your smartwatch.
Visit our SUPPORT section to view our video guide.
DISCONNECTING YOUR SMART WATCH & PHONE
- Open the REFLEX ACTIVE App. on your smartphone.
- Tap disconnect device in Settings.
- Forget your device on your smartphone’s Bluetooth settings.
GETTING TO KNOW THE SCREENS
TIME SCREEN There are 3 different time screens to select from, press the
touch key to select the one you prefer.
MESSAGES Unread messages will be displayed in the ‘Message’ interface.
Press the touch key to enter and read the messages on the watch.
SLEEP Wear the watch to fall asleep during 9:00 p.m. to 9:00 a.m. the
watch will record your sleep data of last night the next morning. Press the
touch key to check the sleep data.
WEATHER After connecting with the REFLEX ACTIVE app, you can select
city in the advanced settings of the app. and the weather of this city will be
displayed on your smartwatch.
FIND YOUR PHONE OR SMARTWATCH Once the smartwatch is connected to the
App., the find phone feature will be available. Access via sub-menu and then
more. Press the touch key and your phone will sound a locator alarm. To find
your tracker from your phone, select find device from the settings menu.
MORE Press the touch key repeatedly until the MORE icon shows on the
display and long press the touch key to access ‘Power off; ‘About; ‘Find
Phonetand ‘Reset:
RESET Press touch key, your watch will be reset and restarted.
POWER OFF Long press touch key to turn off the watch.
Please note: Your REFLEX ACTIVE tracker will reset every day at midnight. Data
is stored on the tracker for 7 days. For best results, ensuring activities and
a full history are recorded, we recommend you sync your tracker to the App.
daily.
DAILY ACTIVITIES the smartwatch will record your daily activity
automatically. Press the touch key to check the pedometer, distance, and
calories. After syncing with the REFLEX ACTIVE app, these sports data can be
also checked within the app.
ACTIVITY REMINDER Turn on the sedentary reminder you’ve set in the REFLEX
ACTIVE app. Your watch will vibrate to remind you to take a little exercise.
CALL ALERTS After successfully connecting with the REFLEX ACTIVE app,
turn on ‘Notifications’ in Settings, and you will receive call notifications
on your smartwatch.
CAMERA CONTROL Once connected to the App., the photo feature will be
accessible via settings. By selecting ‘take photo: you can take an image on
your camera phone by pressing the touch key on your watch. The photo will
automatically save onto your phone gallery for Android devices, or the option
to save/retake on iOS devices.
ACTIVITY TRACKING Press the touch key repeatedly until Sports icon is
displayed & long press the side button to enter in the multi-sport mode. The
smart watch has 4 sports modes: Walking, Running, Cycling and Hiking. Long
press side button to select and then enjoy your sport. The smart watch will
record your data. After your sports, you can long press the touch key twice to
stop recording and save the sports data. You can also check your sports data
in the app.
Note: If your exercise time is less than 5 minutes, the data will not be
saved.
SPECIFICATIONS
RAM/ROM: 32k/512k
LCD Screen Size: 0.96″One touch
Bluetooth: BT5.0
Call Reminder: Yes
Notification: Yes
Multi-Sport: Hiking, Walking, Running & Cycling
Battery: Built-in rechargeable lithium battery
Battery Capacity: 90mAH
Bluetooth Connected: Up to 4 days
Standby Time: Up to 10 days
Charge Time: 2 hours
Water Resistant: No
Heart Rate:No
Operating Frequency:2402-2480 Mhz
BAND ADJUSTMENT
Your REFLEX ACTIVE bracelet or mesh band can be easily adjusted, please follow
these instructions to achieve the perfect fit.
BRACELET -Watches with removable links are a quick & easy way of being
able to shorten bracelets. Lift the tab at the end of the centre section on
both clasps and remove link. Only applicable to watches with bracelet bands.
MESH BRACELET – Unlock the clamp by using the appropriate tool. Move the
entire clasp to adjust length by sliding along the bracelet. Adjust the length
while wearing the watch to make sure you get a good fit. Make sure the clasp
locates into a moulded indent on back of the bracelet. Lock the clamp plate in
position by pressing it into place using your thumb. DO NOT use the retaining
bar to gain leverage as this will cause damage preventing the clasp to lock.
HOW TO CARE FOR YOUR SMARTWATCH
Do not wear your smartwatch whilst applying sprays or creams. Do not allow
contact with any corrosive agent e.g. paint, solvents or adhesives, as this
may affect the finish of the smartwatch. Your smartwatch is not suitable for
swimming or showers. Do not immerse in water. Do not try to replace or
disassemble the battery. STRAP CARE Environmental conditions can affect the
durability of your strap. Please treat it with care and limit exposure to
direct heat or sunlight. Keep your watch dry and away from wet surfaces. Do
not use chemical cleaners on your strap and avoid contact with cosmetic
products, such as fake tan or perfumes. Light soiling can be cleaned using a
weak soapy water solution on a barely damp soft cloth. Please be aware light
coloured straps i.e. whites, creams and pastel colours, are prone to attract
colour transfer from other surface materials and cosmetic substances. Please
take care whilst wearing these products as discolouration of straps is not
covered within the guarantee. SILICONE STRAP CARE To keep your silicone strap
looking good, clean it regularly with mild soap and water to remove any dirt,
oils, lotions etc., ensuring the case of your smartwatch does not get wet.
When you are not wearing your smartwatch, we recommend you store it in the
gift box received with purchase.
STEP COUNTER Smartwatches use multiaxis inertial sensors called
accelerometers. These detect wrist movement in order to measure steps.
However, some wrist actions whilst standing or sitting can mimic the arm
movement of a step and can therefore falsely record steps. The step count
recorded each day should be used as a guide only.
GUARANTEE
Quality and style are at the heart of what we do. REFLEX ACTIVE certifies this
smartwatch is produced using premium materials and is fully tested before
leaving our manufacturing centre.
Your timepiece is guaranteed against any defective parts and construction for
2 years from the date of purchase. Your guarantee is only valid if you present
your original receipt when returning the item. This guarantee provides you
with rights in addition to your consumer statutory rights and therefore does
not limit your statutory rights. Please note this guarantee does not cover
lenses, bands, straps or bracelets, water penetration or batteries.
Additionally, breakages caused by accident or maltreatment are not covered.
All products should be returned to: PH Services, Precision House, Unit 4,
Starley Way, Solihull, B37 7GN. Please contact us before sending in your
product and we’ll guide you through the process.
PRIVACY POLICY
Please check www.reflex-active.com/pages/privacy-policy to view our privacy policy. Please remember
to check for updates periodically.
IMPORTANT SAFETY INFORMATION
– BEFORE USING THE PRODUCT, PLEASE FAMILIARISE YOURSELF vo-n-1 ALL OF THE
SAFETY INFORMATION AND INSTRUCTIONS FOR USE
BATTERY WARNINGS Do not attempt to replace the battery, open the device
enclosure or disassemble your REFLEX ACTIVE product.
Doing so can result in a safety hazard
- The integrated rechargeable battery cannot be removed or replaced
- Substances within the REFLEX ACTIVE smartwatch battery may harm the environment or cause injury if handled or disposed of improperly. In the unlikely event of contact with battery acid, thoroughly flush the affected area with plenty of clean water and seek IMMEDIATE medical attention
- When the battery is fully charged disconnect from the charger, DO NOT exceed 2 hour of charge time. DEVICE WARNINGS This is a Class A product. In a domestic environment, this product may cause radio interference. In which case the user may be required to take adequate measures
- Ensure your smartwatch correctly engages with the charging contacts
- Before each use, please check the product for damage, do not use if the product is damaged
- This is not a toy, children should not play with this product
- Never attempt to open your smartwatch, this may result in danger
- Protect the product from strong impacts, vibrations, direct sunlight and dirt
- Do not place heavy objects on the product
- Do not exert pressure on the product
- Avoid strong magnetic fields e.g. loudspeakers
- Salt and thermal water can lead to the corrosion of metal parts. Remove the product before using saunas as the temperature difference can cause condensation
- Do not operate the product near heat sources e.g. radiators or other devices emitting heat. Do not cover the product during operation or charging
- Never use the product on aeroplanes, in hospitals, service rooms, or near medical electronic systems.The wireless signals transmitted could impact the functionality of sensitive electronics
- Do not use your REFLEX ACTIVE product if the display is cracked
- Do not expose your REFLEX ACTIVE product to extremely high or low temperatures
- Do not use abrasive cleaners to clean your REFLEX ACTIVE product
- Remove your REFLEX ACTIVE product immediately if it feels warm or hot
- Do not attempt to wear or operate your REFLEX ACTIVE product whilst charging
- Do not charge your REFLEX ACTIVE product if wet
- Do not check notifications or other applications on the products display while driving or in other situations where distractions could be hazardous. Always be aware of your surroundings when using REFLEX ACTIVE products and services
- Ensure your smartwatch is removed at regular intervals for gentle cleaning.
HEALTH WARNINGS
REFLEX ACTIVE smartwatches contain components that emit electromagnetic
fields, with some of the models containing a magnetic charging dock, please be
aware that these models contain magnets. These electromagnetic fields and
magnets may interfere with medical devices, such as pacemakers and implanted
defibrillators. Please consult your doctor and medical device manufacturer if
you use any medical device before using a REFLEX ACTIVE smartwatch The REFLEX
ACTIVE heart rate monitor is designed for recreational use only, it is not
intended for any medical use such as diagnosing or monitoring any medical
conditions
- The REFLEX ACTIVE heart rate monitor periodically emits flashing lights, please consult your doctor before use if you have epilepsy or similar conditions.
- The REFLEX ACTIVE heart rate monitor usually provides an accurate estimate of your heart rate, but the reading can be affected by factors such as fit of the smartwatch, the physical characteristics of the wearer and the intensity of the activity
- Your REFLEX ACTIVE smartwatch will help calculate distances covered and calories burned during training. Please consult a doctor before starting new exercise regimes
- REFLEX ACTIVE smartwatches contain sensors to track your movement to closely estimate your activity, sleep, calories used etc. These close estimations are not always fully accurate
- Some wearers may suffer skin irritation if the smartwatch is worn for prolonged periods, especially if you suffer from sensitive skin or have allergies. If you notice any irritation you should remove your smartwatch.To help prevent any irritation please ensure the smartwatch is removed regularly for cleaning & do not over-tighten on your wrist
- We recommend you remove your smartwatch each day for gentle cleaning.
In the case of material damage or personal injury caused by incorrect handling
or non-compliance with the safety instructions, no liability can be accepted
by REFLEX ACTIVE. If you have any questions or concerns, please contact us,
you’ll find our contact details on this leaflet.
DECLARATION OF CONFORMITY The original UK and EU declaration of
conformity may be found at :
https://www.reflex-active.com/pages/declaration-of-conformity-certification.
Manufactured by: Peers Hardy UK Ltd, Precision House, Starley Way, Birmingham
Business Park, Bickenhill Lane, Solihull, B37 7GN, UK. EU Address, Peers Hardy
UK LTD, C/O Global E-commerce Experts, Rijnlanderweg 766, Unit H, 2132 NM,
Hoofddorp, Netherlands.
DISPOSAL OF GOODS (The crossed-out wheelie bin symbol is to remind you
that waste electrical products, batteries and accumulators should not be
disposed of in the household waste. If you are unable to reuse or recycle your
article it should be disposed of at a civic amenity site or a local authority
recycling facility.
- Do not dispose of your REFLEX ACTIVE product within the household waste.
- Disposal of your REFLEX ACTIVE packaging and product should be done in accordance with local regulations.
- Batteries are not to be disposed of in municipal waste & require separate collection.
CONTACT US
If you require any further assistance using your REFLEX ACTIVE smartwatch
or our REFLEX ACTIVE App we are here to help!
You can also contact the REFLEX ACTIVE customer service team Monday to
Friday, 9AM to 4PM on:
+44 (0) 121 524 1400
support@reflex-active.com
There is also lots of information on our website reflex-active.com that you
may find helpful.
www.reflex-active.com/pages/support
If there’s anything else you need, then get in touch, we’re here to help!
+44 (0)121 524 1400
support@reflex-active.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>